World Oil’s Marine Drilling Rigs 2001/2002: Jackups – 389 listings – Illustration

World Oil’s Marine Drilling Rigs 2001/2002: Jackups – 389 listings – Illustration – Statistical Data Included

Listings this year total 389 jackup units, an increase of 11 from last year. This net increase is the result of seven newbuilds announced for: Atwood Oceanics (1), ENSCO (1), Maersk (1), Pride (2) and Santa Fe (2). Three units were added to Former Soviet Union listings and two to National Iranian Drilling. One rig was deleted from National Drilling Co. of Abu Dhabi’s fleet. The listing excludes shallow-water units working in inland waters, and those in non-drilling/workover modes, e.g., tender assist, production and accommodation.

With the merger of R&B Falcon with Transocean Sedco Forex, the latter now owns 57 jackups, 15% of the world’s fleet. The next largest owners are ENSCO (38), Noble (33) and–following its merger with Marine Drilling– Pride (33). Significant fleets are also owned by Rowan and Santa Fe (24 each), and Global Marine (23). And Diamond Offshore and Nabors list 14 and 13 rigs each. International owners with significant fleets include: Maersk (11), National Drilling Co. of Abu Dhabi (10), Oil & Natural Gas Corp. (8), and Petromar and CONDC with seven each. Including several “subsidiary” classifications, 59 owners are listed this year.

For utilization and geographic location, ODS-Petrodata’s November Offshore Rig Locator shows 264 jackups working, out of a total worldwide fleet of 388 rigs, for 68% utilization, down from 82% one year ago. This is principally due to sharp cuts in the U.S. Gulf of Mexico, where only 72 of 150 available units were working due to lower oil/gas prices. The second most active area was the Persian Gulf, with 46 of its 56 rigs working. The North Sea/NW Europe had all but one of its 34 jackups working. Asia accounted for 60 rigs–in India, 16 of 20 units were working; SE Asia had 19 of its 22 rigs active; and the Far East saw 11 of its 18 jackups working. West Africa was working 19 of its 23 rigs. Other active areas included: the Mediterranean/Black Sea, 10 of 12; Red Sea/Gulf of Suez, 11 of 11; and South/Central America, 18 of 25.

Aban Loyd Chiles Offshore Ltd. (ALCO)

ABAN II

DESIGN: Bethlehem Steel Corp., JU-250MS

CONSTRUCTION: Bethlehem Steel Corp., Sparrows Point, Md, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 65 persons.

HULL: 166′ x 132′ x 16′.

VARIABLE LOAD: 4,500 kips.

STORAGE: Mud & Cmt Bulk-6,600 cf; Liquid Mud-1,500 bbl; Water for Drilling-4,700 bbl; Potable Water–450 bbl.

DRILLING EQUIPMENT: Drawworks-MIDCO 1220; Pumps–Gardner Denver PZ-11, 1,600 hp; Prime movers–three 12 cyl EMD, 1,650 hp each; Rotary Table-Gardner Denver 37 5/8″.

DERRICK: Brarrham 147′; 1,392,000-lb hook load capacity.

BOP SYSTEM: Three Cameron type U 10,000 psi BOP; 5,000 psi Hydril; 20″ Regan diverter.

CRANES: Two SeaKing 1400.

REMARKS: Formerly Griffin-Alexander III.

WORK AREA: Bombay High.

ABAN III

DESIGN: Marathon LeTourneau

CONSTRUCTION: Marathon LeTourneau Offshore Pte. Ltd., Singapore, 1974, Modified to cantilever 1984.

PERFORMANCE: Water depth-300′; Drilling depth–20,000′.

QUARTERS: 94 persons.

HULL: LeTourneau design 230′ x 200′ x 26.

HELIPORT: 60′ dia.

STORAGE: Mud & Cmt Bulk–8,000 cf+5,000 sks; Liquid Mud-1,400 bbl; Water for Drilling– 8,500 bbl; Potable Water-1,400 bbl.

DRILLNG EQUIPMENT: Drawworks-Nat’l 1320; Pumps–two Nat’l 12-P-160 Triplex, 1,600 hp; Prime movers–live Cat. D-399; Rotary Table-37 5/8″.

BOP SYSTEM: 11′, 15,000-psi BOP and manifold.

CRANES: Three LeTourneau; 45-ton @ 25′.

MOORING: Four 10,000-lb It anchors; four electric motor driven winches rated at 50,000-lb pull each.

SEA STATE Operating draft–30′; Survival-wave height 50′.

POSITIONING: Thruster assist.

REMARKS: Purchased from Atwood, 1976. Formerly Chickamauga and lie D’ Amsterdam.

WORK AREA: India.

Amidco

AMAZONE

DESIGN: IHC Gusto Engineering, Holland

CONSTRUCTION: Aker Stord Yard, Norway, 1982.

PERFORMANCE: Water depth–168′; Drilling depth-14,000.

QUARTERS: 68 persons.

HULL: 164′ x 121′ x 19′.

VARIABLE LOAD: 4,760 kips.

HELIPORT: 33 dia.

STORAGE: Mud & Cmt Bulk-7,120 cf; Liquid Mud–203 mt: Fuel-2,160 bbl; Water for Driliing–2,400 bbl; Potable Water–700 bbl.

DRILLING EQUIPMENT: Drawworks-Ideco H-900; Pumps–two Ideco 1,000 hp, 7’xl0′ Triplex; Prime movers–three 12 cyl. SACM 900 km each; Rotary Table–Ideco LR-275-K.

DERRICK: Superior. 142′.

BOP SYSTEM: Hydril, two annular, 21 1/2″ 2,000 psi and 13 5/8″ 5,000 psi; one double ram, 13 5/8″ 5,000 psi,

CRANES: Two MAN, HDK 600 NM, HDK 260 HM.

WORK AREA: West Africa.

Arabian Drilling Co.

ARABDRILL 8

DESIGN: Baker Marine Hull 150

CONSTRUCTION: Promet Pvt, Ltd., Singapore, 1982.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 80 persons.

HULL: 174′ x 162.6′ x 16′.

VARIABLE LOAD: 2.306 kips.

HELIPORT: 65′ x 65′.

STORAGE: Mud & Cmt Bulk–7,000 cf; Liquid Mud-1,316 bbl; Fuel-1,576 bbl; Water for Drilling–3,400 bbl; Potable Water-1,230 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 110 UE; Pumps–two Gardner Denver PZ9JC; Prime movers–four Cat. D 398; Rotary Table-Nat’l C375; Top Drive–Varco.

DERRICK: Pyramid 147′; 800,000 lb hook load capacity.

BOP SYSTEM: Cameron U 13 5/8″ x 5.000 x 3′; Hydril GK 13 5/8″ x 5,000; Hydril MSP 21 1/4 x 3,000; Shalfer LWS 20 3/4″ x 3,000. Cameron U 7 1/16 x 10,000 x 3, Hydril GK 7 1/16 x 10,000; Cameron U double/single 13 5/8″, 5,000; Koomey unit 21 bottles & remote controls.

CRANES: Two BMC 1,000,40 tons x 25′.

MOORING: Two 10-ton, one 5-ton anchor w/l 1/2″ wire rape.

WORK AREA: Arabian Gulf.

ARABDRILL 17

DESIGN: Marathon LeTourneau 82-SC-C

CONSTRUCTION: Davie Shipbuilding, Canada, 1981.

PERFORMANCE: Water depth-250′; Drilling depth–20,000′.

QUARTERS: 86 persons

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 1,775

HELIPORT: 65′ diameter, S-61.

STORAGE: Mud & Cmt Bulk–8,500 cf; Liquid Mud-1,490 bbl; Fuel-2,254 bbl; Water for Drilling–6,612 bbl; Potable Water–983 bbl.

DRILLING EQUIPMENT: Drawmorks-Nat’l 1320 UE; Pumps–two Nat’l 12-P–160; Prime movers– tour Cat. D-399; Rotary Table-Nat’l C-375; Top Drive–Varco TDS-3.

DERRICK: 160′ x 30′; 1,000,000 lb hook load.

BOP SYSTEM: Two double 13 5/8″, 10,000 psi wp; one 5,000 psi diverter; one Hydril MSP. 21 1/4, 2K.

CRANES: Three LeTourneau, PCM-120 AS w/100′ boom, 50 short tons @ 24′.

REMARKS: Fonneriy Glomar High Island VI.

WORK AREA: Arabian Gulf.

ARABDRILL 19

DESIGN: Baker Marine Corp., 200 H Arabian Gulf Class

CONSTRUCTION: Promet Private Ltd., Singapore. 1982.

PERFORMANCE: Water depth–160; Drilling depth–25,000′.

QUARTERS: 86 persons.

HULL: 174′ x 162′ x 16′.

VARIABLE LOAD: 1,750 short t (drilling conditions).

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud-1,900 bbl; Water for Drilling–5,200 bbl; Potable Water-1,200 bbl.

DRILLING EQUIPMENT. Drawmorks–Emaco C-2 Type II; Pumps–Emaco FB1600; Prime movers– tour Cat D-399; Rotary Table–Emsco T3750; Top Drive–Varco TDS-3.

DERRICK: Dreco 160′; 1,300,000-lb capacity.

BOP SYSTEM: CIW 13 5/8″, 10,000 psi, one double, one single.

CRANES: Two Baker Marine Corp. 900.

REMARKS: Formerly Sedneth 202.

WORK AREA: Arabian Gulf, Middle East.

Atwood Oceanics

VICKSBURG

DESIGN: Marathon Le Tourneau Class 84, upgraded to Enhanced 116C, high capacity including 60′ extended reach cantilever.

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss. 1975, modified 1998

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 88 persons.

HULL: 238′ x 209′ x 26′ (410′ leg length).

VARIABLE LOAD: 2.500 t.

HELLPORT. 72′ diameter.

STORAGE: Mud & Cmt Bulk–9,500 sks; Liquid Mud–2,100 bbl; Water for Drilling–8,500 bbl; Potable Water-1,724 bbl.

DRILLING EQUIPMENT: Drawworks-Emsco C2, 2,000 hp; Pumps–Three Emsco FA-1600 Triplex; Prime movers–Four Cat. Model 3516, 1,855 hp each; Top Drive–Varco TDS-4S.

DERRICK: 160′; 1,300,000-lb static hook load.

BOP SYSTEM: Hydril 21 1/4″, 2,000 psi; Hydril 13 5/8″, 5,000 psi; two Cameron U double 10,000 psi.

CRANES: Three La Tourneau, 100′ booms rated 45t @ 25′.

TOWING REQUIREMENTS: 10,000-hp tug; 5 knots in calm seas.

MOORING: Four 10,000-lb anchors; Four electric motor driven winches rated at 50,000 lb pull each.

WORK AREA: India.

NEWBUILD

DESIGN: KFELS Mod V. Enhanced Premium B Class

CONSTRUCTION: Under construction in Singapore, est. July 2003

PERFORMANCE: Water depth– 360′; Drilling depth– 30,000

QUARTERS: 112 persons

HULL: 234′ x 208′ x 25′.

VARIABLE LOAD: 7,500 kips operating

HELIPORT: S-61

STORAGE: Mud & Cmt. Bulk– 11,100 cu ft; Liquid Mud– 4,200 bbl; Fuel–2,400 bbl; Water for Drilling–3,600 bbl; Potable Water-2,000 bbl

DRILLING EQUIPMENT. Drawworks-3,300 hp; Pumps–three 2,200 hp triplex; five Cat 3516 L3, 1,855 hp each; Rotary Table-49 1/2″

DERRICK: 160′, 1,500,000 lb static hook load.

BOP SYSTEM: One 13 5/8″, 5K annular; two 13 5/8″, 10 k dbl ram.; one 49 1/2″ fixed KFDJ diverter.

CRANES: Three, 120′ booms, two 28 t, one 36 t.

REMARKS: 70′ cantilever

WORK AREA: NIA

Catleia Oil Co. (Petrobras subsidiary)

PETROBRAS VI

DESIGN: RB LeTourneau, Inc.

CONSTRUCTION: Davie Shipbuilding Ltd., Canada, 1982.

PERFORMANCE: Water depth–230′; Drilling depth–23,000′.

QUARTERS: 84 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 1,997 t.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–7,200: Liquid Mud-1,416 bbl; Fuel–2,970 bbl; Water for Drilling–6,657 bbl; Potable Water–2,760 bbl.

DRILLING EQUIPMENT. Drammorks–Oilwell E-3000; Pumps–Two Oilwell A-1700-PT, triplex; Prime movers–Three EMD 16-645-EB, 2,200 hp, 900 rpm; Rotary Table-Nat’l C-375, 37 1/2″; Top Drive-Nat’l PS2-500/500.

DERRICK: Pyramid 160′; 1,100,000 lb

BOP SYSTEM: Shaffer 21 1/4″, 2,000 psi; 13 5/8″, 10,000.

CRANES: Three Marathon Le Tourneau PC-120-AS, 45 t.

MOORING: Four Danforth, 10,000-lb anchors: four Marathon LeTourneau W 1500, 22.5-t winches.

WORK AREA: Brazil.

Chiles Offshore

CHILES COLUMBUS

DESIGN: Letourneau Enhanced 116-C.

CONSTRUCTION: Amfels Shipyard, Brownsville, Texas, 1999.

PERFORMANCE: Water depth–360′; Drilling depth–30,000′. leg length-511′.

QUARTERS: 82 persona.

HULL: 243′ x 206′ x 26.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 73′ dla., Sikorsky S-61N.

STORAGE: Mud & Cmt Bulk–11,000 cut; Liquid Mud–2,500 bbl; Fuel–2.074 bbl: Water for Drilling–11,622 bbl: Potable Water-1,714 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-UDEE, 3,000 hp; Pumps–three Nat’l 14-P-220, 2,200 hp; Prime movers–five Cat 3516 B, ea, 1,850 hp; Rotary Table-Nat’l D-495; Pipe Handling System-MH–1899 Iron Roughneck: Top Drive-Nat’l PS2-650/650 power swivel.

DERRICK: Loadmaster 170′, 1,500,000 lb.

BOP SYSTEM: Shaffer 13%”, 5,000 psl ann.; two CIW TL 13%’, 10 k doubles; Diverter-Hydril MSP-500-30″.

CRANES: Three Letourneau 50 t, two w/ 100′ booms, one W/ 120′.

REMARKS: Five Bay Ross Hill SCR control system: Zero discharge, 70′ cantilever reach.

WORK AREA: Gulf of Mexico.

CHILES CORONADO

DESIGN: LeTourneau Super 116 C.

CONSTRUCTION: TDI Halter 1999.

PERFORMANCE: Water depth–330′; Drilling depth–30,000′.

QUARTERS: 94 persons.

HULL: 243′ x 206′ x 26′.

VARIABLE LOAD: 6,000 kips.

HELIPORT: 73′ octagonal.

STORAGE: Mud & Cmt. Bulk–10,880 cf; Liquid Mud–5,400 bbl; Fuel–2,800 bbl: Water for Drilling–9,000 bbl; Potable Wafer-1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625-UDEE disk brakes, 3,000 hp; Pumps–Three Nat’l 14P-220, 2,200 hp; Prime movers–Four Cat. 3606 TA, 2,548 hp; Rotary Table-Nat’l Oilwell D-495 Top Drive-Nat’l PS 2 power swivel.

DERRICK: Dreco 170′; 1,928,571 lb.

BOP SYSTEM: One single/one double Cameron 13%”, 15,000 psl; one Cameron DL 13%’, 10,000 psi annular.

CRANES: Three LeTourneau PCM-120SS. 45.36 t.

REMARKS: 65′ cantilever reach: Formerly Tonala.

WORK AREA: Trinidad.

CHILES MAGELLAN

DESIGN: Letourneau Super 116.

CONSTRUCTION: Amfels Shipyard, Brownsville, Texas, 1999.

PERFORMANCE: Water depth–380′. Leg length-544′.

VARIABLE LOAD: 6,500 kips.

OTHER DATA: Typical Chiles Columbus.

BOP SYSTEM: Shatter 13%” 10K dbl; Hydril MSP 500, 30″ diverter.

WORK AREA: Gulf of Mexico.

CHILES DISCOVERY

DESIGN: Keppel FELS Mod V-B

CONSTRUCTION: Keppel FELS Shipyard, Singapore, 2002.

PERFORMANCE: Wafer depth–375′; Drilling depth–30,000′.

QUARTERS: 94 persons.

HULL: 225′ x 208′ x 25′.

VARIABLE LOAD: 6,500 kips.

HELIPORT: 73′ dia., S-61N.

STORAGE: Mud & Cmt Bulk–11,000 cf; Liquid Mud–3.600 bbl; Fuel–2.400 bbl; Water for Drilling–14,300 bbl; Potable Water–2,000 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’I 1625 UBDE; Pumps–three Nat’l 14-P-220; Prime movers–Six Cat 3516 B, 1,855 hp; Rotary Table-Nat’l D-495: Iron Roughneck-Nat’l 112-170: Top Drive-Nat’l PS2-650/650 power swivel.

DERRICK: Dreco, 170′, 1,500,000 lb.

BOP SYSTEM: Shatter 30′. 1,000 psi diverter; Shatter 18 3/4, 5K ann.; two CIW 183/4″, 10K doubles.”

CRANES: Three Dreco, 120′, 50t @ 20′.

REMARKS: Drive pipe tensioning independent of cantilever beams.

WORK AREA: Australia/Asia.

CHILES GALILEO

DESIGN: Keppel FELS Mod V, Class B.

CONSTRUCTION: Keppel FELS, Singapore, 2002.

BOP SYSTEM: CIW 18 3/4″, 5k ann.; two CIW U 18 3/4″, 10 k dbl; Shatter 30″, 1,000 psi diverter.

OTHER DATA: Typical Chiles Discovery.

WORK AREA: Gulf of Mexico

China Offshore fill Northern Drilling Co. (CONDO)

BOHAI 4

DESIGN: CTA/Robin Loh

CONSTRUCTION: Hitachi Zosen, 1977. Converted to cantilever.

PERFORMANCE: Water depth–295′: Drilling depth–19.685′.

QUARTERS: 106 persons.

HULL: 213′ x 212′ x 27′.

VARIABLE LOAD: 2,640 t.

HELIPORT: 73′ x 73′, S-61.

STORAGE: Mud & Cmt Bulk–5,918 cf each; Liquid Mud–2.150 bbl: Fuel–5.100 bbl; Water for Drilling–5,400 bbl; Potable Water–2,300 bbl.

DRILLING EQUIPMENT: Drawworks–one Nat’l 1320 UE; Pumps–one Nat’l 12-P-160, two Bao Jl China F-1600; Prime movers–four Cat. 3516 DITA; Rotary Table-Nat’l C-375; Top Drive–TSD-BSA.

DERRICK: 160′; Pyramid; 650 t hook load.

BOP SYSTEM: NL 21%, 2,000 psi; Hyd. 29 1/2″, 5,000 psi.

CRANES: Three Amclyde type 10.000.

MOORING: Four Marathon 10.000 lb anchors.

WORK AREA: Bohai Gulf, China.

BOHAI 5

DESIGN: Bohai Oil Corp. VHT-905.

CONSTRUCTION: Dalian Shipyard, China, 1983.

PERFORMANCE: Water depth–40 m; Drilling depth–6,000 m.

QUARTERS: 98 persons.

HULL: 58 m x 34 m x 5.5 m.

VARIABLE LOAD: 1.500 t.

HELIPORT: 17.2 m x 21 m, S-61.

STORAGE: Mud & Cmt Bulk–300 cu m; Liquid Mud–325 cu m; Fuel–365 cu m; Water for Drilling–170 cu m; Potable Water–392 cu m.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–Two Bao Ji China F-1600; Prime movers–five Cat D35

167A. Rotary Table-Nat’l. C-375; Top Drive–Varco IDS-1.

DERRICK: 147′; 600 t.

BOP SYSTEM: Hydril 29 1/2, 500 psi; 13%”, 5.000 psi GK ann.; 3 x 13%’. 10,000 Psi NL Shatter.”

CRANES: Two Nat’l H-65A, 33t.

MOORING: Four x 5 t.

WORK AREA: Bohai Gulf, China.

BOHAI 7

DESIGN: Bohai Oil Corp., VHT 904.

CONSTRUCTION: Dallan Shipyard, China, 1983.

STORAGE: Mud & Cmt Bulk–110 t; Liquid Mud–270 cu m; Wafer for Drilling–170 cu m; Potable Water–392 t.

OTHER DATA: Typical of Bohei No. 5, except top drive PTD 50.

WORK AREA: Bohai Gulf, China.

BOHAI 9

DESIGN: Bohai Oil Design Co., VHT 905.

CONSTRUCTION: Dalian Shipyard, 1984.

OTHER DATA: Same as Bohai No. 5, except Top Drive–Varco IDS-1.

BOHAI 8

DESIGN: Marathon LeTourneau; 82-SD. Converted to cantilever.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1980.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 94 persons.

HULL: 212′ x 176′ x 20′.

VARIABLE LOAD: 1.696 t.

HELIPORT: 70′ diameter, S-61.

STORAGE: Mud & Cmt Bulk–222.56 cu m; Liquid Mud–198 cu m; Fuel–249 cu m; Water for Drilling–493 cu re; Potable Water–302.96 cu m.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–two Nat’l 12-P-160; Prime movers–four Cat. 3516; Rotary Teble-Net’l C-375; Top Drive–Varco IDS-1.

DERRICK: 147′; 832 t.

BOP SYSTEM: 211/4″ Hydril 2,000 psi, 13%” Schaffer, 10.000 psi.

CRANES: Three PCM-120 AS 4S t.

MOORING: Four Marsthort 23 t.

WORK AREA: Bohai Bay, China.

BOHAI 10

DESIGN: Cantilever

CONSTRUCTION: Marathon Le Tourneau, Singapore, 1980.

OTHER DATA: Same as Bohai No. 8, except top drive Maritime DDM-500.

WORK AREA Bohai Bay.

BOHAI 12

DESIGN: MHI; MD-T-45J, cantilever

CONSTRUCTION: MHI Hiroshima Shipyard. 1978.

PERFORMANCE: Water depth–56.7 re; Drilling depth–6.000 m.

QUARTERS: 100 persons.

HULL: 184′ x 157 x 21′.

VARIABLE LOAD: 2,160 t (working).

HELIPORT: 70′ diameter; S-61.

STORAGE: Mud & Cmt Bulk–9,200 cf+5,000 sks; Liquid Mud–2.126 bbt; Fuel–2,025 bbl; Water for Drilling–2,767 bbl; Potable Water–2,283 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–four CAT 3516 TA; Rotary Table–Emaco T-3750; Top Drive–IDS-1.

DERRICK: Emsco/MHI 157′; 1,333 kips.

BOP SYSTEM: Shaffer single/dbl., 13%” 10,000 psi

CRANES: Two 6/10. 40 t.

MOORING: Four x 8,800 lb.

REMARKS: Formerly Hakuryu Vl.

WORK AREA: Bohai Bay.

China Offshore Oil Southern Drilling Co. (COSDC)

NAN HAI NO. 1

DESIGN: ETA/Robin Loh; Robray-300

CONSTRUCTION: Robin Loh, Singapore, 1976. Converted to Cantilever 2000.

PERFORMANCE: Water depth–165′; Drilling depth–20,000′.

QUARTERS: 100 persons.

HULL 213′ x 212′ x 27′.

VARIABLE LOAD: 1,888 mt.

HELIPORT: 75′ diameter, S-61.

STORAGE: Mud & Cmt Bulk–8 x 42 cm; Sack 900 cm; Liquid Mud-330 cm; Fuel-794 cm; Water for Drilling–876 cm; Potable Water-410 cm.

DRILLING EQUIPMENT: Drawworks–one Nat’l 1320 UE; Pumps-two BPMMP F-1600; Prime movers–four Cat. 3516. 1,650 hp: Rotary Table-Nat’l C-375; Top Drive–Varco IDS-1.500 t.

DERRICK: 147′ x 30′ x 30′.

BOP SYSTEM: Hydril, 2,000 psi 21%” and 5,000 psi, 13%” annulars; two CIW, 13%”, 10.000 psi.

CRANES: Two Amolyde, 1,000 HD, 100′ boom.

WORK AREA: South China Sea

NAN HAI NO. 4

DESIGN: ETA/Robin Loh, R 300.

CONSTRUCTION: Hitachi Zosen Shipbuilding & Engineering Co. Ltd. Tokyo, 1980.

PERFORMANCE: Water depth–300; Drilling depth–20,000.

QUARTERS: 114 persons.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE, 2.000 hp; Pumps–two Nat’l Triplex 12-P-160, one 10-P-130: Prime movers–two EMD 16-645E9, one EMD 12-645 E9 & SCR system; Rotary Table-Nat’l C-375; Top Drive-Varco TDS-3.

CRANES: Two Dreco 60DNS100-1, 100′ boom, 50 t; one Dreco 60 DNS11E-1.110′ boom, 40 t.

OTHER DATA: Typical of Nan Hal No. 1.

WORK AREA: South China Sea.

Crosco lntegrated Drilling & Well Services Co., Ltd.

LABIN

DESIGN: Levingston III-C

CONSTRUCTION: Viktor Lenac, Rijeka, Croatia, 1985, upgraded 2001.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 77 persons.

HULL: 200′ x 186′ 23′.

VARIABLE LOAD: 1500 mt.

HELIPORT: Sikorsky S-61, Bell 412.

STORAGE: Mud & Cmt Bulk–18,900 ct; Liquid Mud-1,263 bbl; Fuel–4,500 bbl; Water for Drilling–5,562 bbl; Potable Water-755 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12P-1 60, 1,600 hp: Prime movers–three Pie stick Diesel 16PA, one Pielstick 6 PA; Rotary Table-Nat’l type C-375, 371/2″, Top Drive–Varco TDS 3-S.

DERRICK: 147′; 1,000,000-lb hook load.

BOP SYSTEM: Hydril MSP 30′, 1 K diverter, Hydril MSP 211/4″, 2 K; Sheffer LWS 211/4″, 2 singles; Shaffer spherical 13%”, 5 K; CIW ram type U, 13 %”, 10 K, two double.

CRANES: Two Nat’l OS125 w/140′ booms; 32-mt max. cap.

MOORING: Two ACTA single drum; one double drum; four Offclrill 11 anchors, 3,629-mt each.

REMARKS: Zero discharge.

WORK AREA. Adriatic.

Dhabi Drilling

DHABI 2

DESIGN: Baker Marine-150

CONSTRUCTION Promet, Singapore, 1982

PERFORMANCE Water depth–160′; Drilling depth–20,000′.

QUARTERS: 70 persons.

HULL: 151′ x 156 x 18′.

VARIABLE LOAD 1.750 st.

HELIPORT: 60′ diameter, Sikorsky S61N.

STORAGE: Mud & Cmt Bulk–7,020 cf: Liquid Mud–1,550 bbl; Water for Drilling–6,422 bbl; Potable Water–2,126 bbl.

DRILLING EQUIPMENT: Drawworks–N/A; Pumps-two CE FB-1600; Prime movers–CEO 2 Type 2, four Cat D-399TA; Rotary Table-Emsco 371/2″; Top Drive–Varco TDS-3.

DERRICK: Dreco 160′.

BOP SYSTEM: CIW 13%’ 10K single/dbl.

CRANES: BMC 900 hydraulic.

REMARKS: Formerly Sedco 160. Managed by Schlumberger Drilling Services.

WORK AREA: Ambian Gulf.

Diamond Offshore Drilling, Inc.

OCEAN CHAMPION

DESIGN: Bethlehem, 250-MS (photo typical)

CONSTRUCTION: Bethlehem Steel Corp., Singapore, 1975, Rebuilt, 1982; Modernized 1985.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 74 persona, plus 3-man sick bay.

HULL: 166′ x 132′ x 16′.

HELIPORT: 83′ x 83′, S-61.

STORAGE: Mud & Cmt Bulk–6,030 cf; Sack storage-3,000 sks; Liquid Mud–1,800 bbl: Fuel–1,719 bbi; Water for Drilling–4,575 bbl; Potable Water–474 bbl.

DRILLING EOUIPMENT: Dramworks–Nat’l 1625 DE, three 800 hp motors; Pumps–two Nat’l 12-P-160 triplex, 1,600 hp; Prime movers–two EMD 16-645-E8 & one 8-645-E8; Rotary Table-Nat’l 37 1/2″, 800 hp.

DERRICK: 147′; 1,300,000-lb hook load capacity.

BOP SYSTEM: One 27 1/2″ nom. Regan KFDJ diverter; One Shaffer spherical annular, 13 5/8″, 5,000 psi; One double and one single Cameron “U”, units, 13 5/8″, 10,000 psi.

CRANES: Two LeTourmeau PCM-120-AS w/100′ boom.

WORK AREA: Gulf of Mexico.

OCEAN COLUMBIA

DESIGN: LeTourneuc 82-SD-C

CONSTRUCTION: Marathon LeTourneau, 1978.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 67 persons, plus 2-man sick bay.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 3,451 kips.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk–7.700 cf; Sack storage-4,000 sks; Liquid Mud-1,502 bbl; Fuel–2,287 bbl; Water for Drilling–6,655 bbl; Potable Water–983 bbl.

DRILLING EQUIPMENT: Drareworks-Nat’l 1320-UE driven by two 800 hp motors; Pumps–two Nat’l 12-P-160, 6 1/2″ x 12″ x Triplex; Prime movers–three EMD 16645 EL diesel engines, three 1,500 KW GE A-20-N6 gens, Baylor Thyrig II SCR system; Rotary Table-Nat’l C-375; Pipe Handling System–Varco IR-2000; Top Drive–Varco TDS-3.

DERRICK: Pyramid, 160′ x 30′ x 30′. 1,044,000-lb hook load.

BOP SYSTEM: One Shaffer 5,000 psi spherical, One single and one double Cameron U 13 1/2″, 10,000 psi.

CRANES: Three LeTourneau PCM 120 w/100′ booms. Rated for 48 t @ 26′ radius.

REMARKS: Cantilever structure can be extended 40′ from stern.

WORK AREA: Gulf of Mexico.

OCEAN CRUSADER DESIGN: JU-200 MC

CONSTRUCTION: Bethlehem Shipbuilding. Singapore, 1982.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 80 persons, plus 3-man sick bay.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 3.762 kips.

HELIPORT: 60′ x 60.

STORAGE: Mud & Cmt Bulk-6,000 cf +3.000 sks; Liquid Mud–l.691 bbl; Fuel–2,100 bbl; Water for Drilling–5.900 bbl; Potable Waler–1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–two Nat’l 12-P-160; Prime movers–three EMD 16-645; Rotary Table-Nat’l 37 1/2″; Top Drive–Varco TDS-3.

BOP SYSTEM: Hydril diverter. Shaffer annular, CIW rams, 10,000 psi.

CRANES: Nat’l. OS 105 w/100′ boom, one Unit Mariner 500-SD w/100′ boom.

REMARKS: Formerly Mr. Sage and Ocean Sentry.

WORK AREA: Gulf of Mexico.

OCEAN DRAKE

DESIGN: Bethlehem; JU-200 MC

CONSTRUCTION: Huangpu Shipyard, China; Delivery March 1983.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 78 persons, plus 2-man sick bay.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 3,796 kips.

HELIPORT: 60′ x70′, S-61.

STORAGE: Mud & Cmt Bulk-6,000 cf; Liquid Mud–1,700 bbl + 3,000 sks; Fuel–2.100 bbl; Water for Drilling-5,900 bbl; Potable Water–1,000 bbl.

DRILLING EQUIPMENT: Drainworks-Nat’l. 1320 UE; Pumps–two Nat’l. 12P-160; Prime movers–two EMD MD 16 EB-645, one EMO MD 8EB 645; Rotary table: Nat’l. C-375, 37 1/2″; Top Drive-Varco TDS 3.

DERRICK: 160′ Derrick Int’l.; 1,000.000 lb hook capacity. Support rails to full height for Varco Top Drive drilling system.

BOP SYSTEM: 13 1/2″ x 5,000-psi; Shaffer spherical annular; 13 1/2″ x 10,000-psi; CIW Type U double ram; 13 5/8″ x 10,000-psi; CIW Type U single ram; Hughes KDFJ 27 1/2″ diverter.

CRANES: Two Nat’l, OS-105 Pedestal w/100′ booms.

TOWING REQUIREMENTS: 12,000 hp.

REMARKS: Formerly Cliff’s Marlin 17.

WORK AREA: Gulf of Mexico.

OCEAN HERITAGE

DESIGN: Friede & Goldman L-780

CONSTRUCTION: Far East Levingston Shipyard, Singapore, 1981.

PERFORMANCE: Water depth-250′; Drilling depth–20,000′.

QUARTERS: 84 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,449 kips.

HELIPORT: 62′ die.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud-1,600 bbl; Water for Drilling-5,500 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320; Pumps-Nat’l 12-P-160; Prime movers–four Cat. D-399; Rotary Table-Nat’l 37 1/2″; Top Drive–Varco BJ.

DERRICK: 147′; 1,044,000-lb hook load capacity.

BOP SYSTEM: One 13 5/8″, 5,000-psi annular; two 13 5/8″, 10,000-psi double ram type; Regan KFDJ diverter.

CRANES: Two Link Belt 218A, 33 t @ 30′.

MOORING: Four 10,000-lb anchors, four anchor winches and four 2,500′ lines.

REMARKS: Formerly Arethusa Heritage.

WORK AREA: Indonesia.

OCEAN SOVEREIGN

CONSTRUCTION: Far East Levingston Shipyard. Singapore, 1981.

DRILLING EQUIPMENT: Prime movers–five Cat. D-399; Top Drive–Varco TDS-3.

DERRICK: 157′.

BOP SYSTEM: One 21 1/4″, 2,000 psi annular diverter.

REMARKS: Formerly Arethuas Sovereign.

OTHER DATA: Same as Heritage.

WORK AREA Indonesia.

OCEAN KING

DESIGN: Modified Marathon LeTourneau, 116C.

CONSTRUCTION: Marathon LeTourneau, 1973, Rebuilt. 1982; modernized 1990, upgraded 1999.

PERFORMANCE: Water depth–300′; Drilling depth-25,000′.

QUARTERS: 88 persons, plus 6-man sick bay.

HULL: 237′ x 200′ x 26′.

HELIORT: S61, 70′.

STORAGE: Mud & Cmt Bulk-7,280 cf; Cmt-2,600 sks; Liquid Mud-1,466 bbl; Fuel-3,222 bbl; Water for Drilling-10,371 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625DE; Pumps–three Emsco FB-1,600 Triplex; Prime movers–four Cat. 3S126-B, Tech Power SCR; Rotary Table-37 1/2″; Pipe Handling System–Varco Iron Roughneck; Top Drive-Varco TDS-3.

DERRICK: 160′ Lee C. Moore; 1,000,000-lb hook load.

BOP SYSTEM: One 27 1/2″ nom. Regan KFDJ diverter, one Hydril GK 13 5/8″, 5,000 psi; Two C1W 13 5/8″. 10,000 psi double.

CRANES: Three LeTourneau PCM-120 AS.

WORK AREA: Gulf of Mexico.

OCEAN NUGGET

DESIGN: Modified Levingston Class III

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas. 1976, Upgrade and cantilever conversion in 1990.

PERFORMANCE: Water depth–300′; Drilling depth–30,000′.

QUARTERS: 69 persons, plus 4-man sick bay.

HULL: Triangular; 208′ x 178′ x 23′.

VARIABLE LOAD: 3.946 kips.

HELIPORT: 62′ x 66′ for S61

STORAGE: Mud & Cmt Bulk-6,000 cf; Liquid Mud-1,591 bbl; Fuel–4,133 bbl; Water for Drilling–8,665 bbl; Potable Water–904 bbl,

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000; Pumps–two Oilwell 1700 PT Triplex; Prime movers–two EMD 16-645 E8, one EMD 12 645 E8; Top Drive–Varco TDS 3.

DERRICK: 160′; 1,000,000 lb hook load.

BOP SYSTEM: Hydril 20″ 2,000-psi annular; Hydril GK 13 5/8″. 5,000 psi annular; One double, one single Cameron U 13 5/8″, 10,000 psi rams.

CRANES: One SeaKing Series 62, 46 t @ 30′ w/100′ boom; One Seatrax 6024, 31 t @ 30′ w/90′ boom.

TOWING REQUIREMENTS: 12,000 hp.

WORK AREA: Gulf of Mexico.

OCEAN SUMMIT

DESIGN: Modified Levingston Class III

CONSTRUCTION: 1972; Upgrade and cantilever conversion in 1991.

DERRICK: Emsco 160′, 30′ x 30′, 1,400 kips gross nominal.

BOP SYSTEM: Hydril MSP 21 1/4″, 2 K; Shaffer 13 5/8″. 5 k.

CRANES: One Sea King Series 62, 46 t @ 30′ w/100′ boom; One Skagit Model 353, 34 t @ 30 w/80′ boom.

OTHER DATA: Same as Ocean Nugget, except Varco SDS-1 side drive.

WORK AREA: Gulf of Mexico.

OCEAN SPARTAN

DESIGN: Friede & Goldman Ltd., L-780

CONSTRUCTION: Swednyards Goteverken, Arendal, Sweden. 1980.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 76 persons, plus 2-man sick bay.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,190 kips.

HELIPORT: 62′ diameter for S61,

STORAGE: Mud & Cmt Bulk-9,670 cf, plus 3,000 sacks; Liquid Mud-1,985 bbl; Water for Drilling-5,450 bbl; Potable Water–1 ,180 bbl,

DRILLING EQUIPMENT: Drawworks–Mid-Cont. U1220-EB-2,000 hp; Pumps–two Gardner Denver PZ-11; Prime movers–4-D-399 Cat; Rotary Table–Oliwell 37 1/2″; Top Drive–Varco TDS-4S.

DERRICK: Dreco 160′, 1,000,000-lb hook load.

BOP SYSTEM: One Shaffer, 13 5/8″ x 5,000 psi; one double and one single 01W type U 13 5/8″ x 10,000 psi;

CRANES: Link Belt 218 & 238.

WORK AREA: Gulf of Mexico.

OCEAN SPUR

CONSTRUCTION: Smedeyards Gotaverken, Arandal, Sweden, 1981.

OTHER DATA: Same as Ocean Spartan, Top Drive–Varco TDS-3.

WORK AREA: Gulf of Mexico.

OCEAN TITAN

DESIGN: LeTourneau Class 64

CONSTRUCTION: Marathon LeTourneau, 1974, Upgraded 1989.

PERFORMANCE: Water depth–350′; Drilling depth–25.000′.

QUARTERS: 74 persona, plus 3-man sick bay.

HULL: 230′ x 200′ x 26′.

VARIABLE LOAD: 4,825 kips.

HELIPORT: 71′ diameter for S61.

STORAGE: Mud & Cmt Bulk–6,300 cf; Liquid Mud-1,763 bbl; Fuel–2,145 bbl; Water for Drilling–5,425 bbl; Potable Water-1,025 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625 DE driven by three 1,000 hp mtrs; Pumps–three Nat’l 12-P-160, 6 1/2″ x 12″ Triplex; Prime movers–three EMD SR-16 diesel engines. 3-1500 kW AC generators. Ross-Hill SCR; Rotary Table-Nat’l C-375; Pipe Handling System–Varoo IR-2000; Top Drive–Varco TDS-4 w/RES-1.

DERRICK: Brown 165′ x 30′ x 30′, 1,700,000 lb load capacity.

BOP SYSTEM: 15,000 psi choke manifold: KFDS diverter; Two double 10,000 psi Cameron type U and one 5,000 psi Shaffer spherical, 13 5/8″.

CRANES: Three LeTournese PCM 120 w/100′ booms rated 90,000 lb @ 25′.

WORK AREA: Gulf of Mexico.

OCEAN TOWER

DESIGN: Class 53

CONSTRUCTION: Marathon LeTourneau, 1972.

QUARTERS: 56 persons, plus 3-man sick bay.

STORAGE: Mud & Cmt Bulk–6,300 cf; Sack Storage-5,000 sks; Liquid Mud-1,635 bbl; Fuel–3,230 bbl; Water for Drilling–5,550 bbl; Potable Water–850 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE; Pumps–two Nat’l 12-P-160 Triplex 1,600 hp. one Nat’l 9-P-100 1,000 hp Triplex; Prime movers–three EMD SR-16 diesel engines; Rotary Table-Nat’l C-375; Pipe Handling System-Varco IR-2000, Top Drive–Varco TDS-3.

DERRICK: Lee C. Moore 160′. 1,000,000 lb.

BOP SYSTEM: 21 1/4″ 2,000 psi WP Hydril MSP w/21 1/4″ spool, two 12″ ANSI; 135/a” 5m Shaffer spherical annular, 135/a” IOM CIW type U double and single.

OTHER DATA: Same as Ocean Titan.

WORK AREA: Gulf of Mexico.

OCEAN WARWICK

DESIGN: Levingston; Class III, independent legs.

CONSTRUCTION: Built by Levingston Shipbuilding Co., 1971. Upgrade and cantilever conversion in 1998.

PERFORMANCE: Water depth-300′; Drilling depth-20,000′.

QUARTERS: 88 persona, plus 6-man sick bay.

HULL: 208′ x 178′ x 122′.

VARIABLE LOAD: 2,090 at.

HELIPORT: 62′ x 62′

STORAGE: Mud & Cmt Bulk–6,000 cf; Sack storage–1,760; Liquid Mud–1,165 bbl; Fuel–4,200 bbl; Water for Drilling–5,623 bbl; Potable Water–904 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l. 1625 DE; Pumps–two Nat’l. 12P-160 Triplex; Prime movers-three EMD 16-EIG, Tech Power SCR system; Rotary table: Nat’l. 37 1/2″; Top Drive–Varco TDS-3.

DERRICK: Lee C. Moore. 160′; 1,000,000 lb hook load.

BOP SYSTEM: Shaffer annular 135/a” x 5,000 psi, 135/a” x 10,000-psi: Cameron U triple ram stack; 135/a” x 10,000-psi; Cameron U single ram;13 5/a” x 5,000-psi; Cameron D annular; Hughes KDFJ 27 1/2″ nominal diverter.

CRANES: Two Nat’l H-65A, 75′ boom; one American Aero OM-900-4D, 110′ boom.

TOWING REQUIREMENTS: 12,000 hp.

REMARKS: Formerly Cliff’s Marlin 6.

WORK AREA: Gulf of Mexico.

Egyptian Drilling Co.

KAMOSE

DESIGN: Levingston 111-C

CONSTRUCTION: Verolme Estaleros Reunidos Brazil, 1987.

PERFORMANCE: Water depth-300′; Drilling depth-20,000′.

QUARTERS: 80 persons.

HULL: 203′ x 190′ x 23′.

VARIABLE LOAD: 1,322 mt.

HELIPORT: 72′ diameter.

STORAGE: Mud & Cmt Bulk–7,200 cf; Liquid Mud–1,580 bbl; Fuel–2,600 bbl; Water for Drilling–8,500 bbl; Potable Water–2,400 bbl.

DRILLING EQUIPMENT: Drawworks-ldeco E-2100; Pumps–three ldeco T-1600; Prime movers–five Cat D-399; Rotary Table-Oilwell 37 1/2″; Top Drive–Varco IDS.

DERRICK: Dreco 147′; 1,000,000 lb.

BOP SYSTEM: Shaffer 135/a”, 10,000 psi; Reagan 30″, 1,000-psi diverter.

CRANES: One Monarch Setrax 6024, 50 t, 130′ boom; two American Tena 16 t, 110′ boom.

REMARKS: Formerly Norbe V.

WORK AREA: Gulf of Suez.

SENUSRET

DESIGN: Mitsui Ocean Development & Engineering, Japan, 200 C-45

CONSTRUCTION: Mitsui Ocean Development & Engineering (MODEC), 1981.

PERFORMANCE: Water depth-250′; Drilling depth–20,000′.

QUARTERS: 80 persons.

HULL: 203’6″ x 190’3″ x 21′.

VARIABLE LOAD: 1,800 mt.

HELIPORT: Rounded 70′ diameter.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud-1,886 bbl; Water for Drilling–3,361 bbl; Potable Water–2,174 bbl.

DRILLING EQUIPMENT. Drawworks-Oilwell 2000 hp; Pumps–two Oliwell A-1700P; Prime movers-four CAT 399 TC; Rotary Table-37 1/2″; Top Drive-Varco TDS-4H.

DERRICK: 162′; 1,300,000-lb hook load.

CRANES: One 80-ton, one 50-ton, Nat’l.

MOORING: Four 10,000 lb US LWT anchors.

OTHER DATA: 357′ legs.

WORK AREA: Gulf of Suez.

SNEFERU

CONSTRUCTION: Mitsui. 1980.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′

DRILLING EQUIPMENT: Top Drive-Varco TDS-3.

OTHER DATA: Same as Senusret except for 328′ legs.

ZOSER

CONSTRUCTION: Hitachi Zosen, Osaka, Japan, 1982.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 84 persons.

HULL: 193.5′ x 174′ x 21′.

VARIABLE LOAD: 2,200 mt.

HELIPORT: Octagon, 70.5′ across flats.

STORAGE: Mud & Cmt Bulk–9040 cf+3,500 sks; Liquid Mud–441 bbl; Fuel–2,500 bbl; Water for Drilling–3,300 bbl; Potable Water-1,500 bbl.

DRILLING EQUIPMENT. Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–three EMD MD12E8; Top Drive–Varco TDS3.

DERRICK: 160′; 1,000,000-lb hook load.

BOP SYSTEM: 135/a”, 10,000 psi; ABB Vetco Gray, 500 psi diverter.

CRANES: Two LeTourneau PCM 120 AS w/100′ boom, 45 t @ 25′.

TOWING REQUIREMENTS: One 15,000 bhp tug for long distances.

REMARKS: Formerly Penrod 97, Chiles Nassau and Dual Rig 97

WORK AREA: Gulf of Suez.

ENSCO International, Inc.

ENSCO 50

DESIGN: Friede & Goldman L-780 Mod II

CONSTRUCTION: Daewoo Shipbuilding, South Korea. 1983; Refurbished in 1998.

PERFORMANCE: Water depth–20-300′; Drilling depth–25.000′.

QUARTERS: 88 persons.

HULL: 180′ x 175′ x 25′

VARIABLE LOAD: 4,640 kips.

HELIPORT: 73′ polygon, S-61.

STORAGE: Mud & Cmt Bulk-9,344 cf; Liquid Mud-1,642 bbl; Fuel-2,360 bbl; Water for Drilling–5,586 bbl; Potable Water-1,328 bbl.

DRILLING EQUIPMENT. Drawworks-Oilwell E-2000; Pumps-Two Oilwell A-1700 PT; Prime movers-three EMD 16-645-E8; Rotary Table- Oilwell B 371/2″; Top Drive-Varco TDS-4H; three Derrick cascaded shakers.

DERRICK: Dreco 170′, 1,300,000 lb.

BOP SYSTEM: Shaffer 21 1/4″, 2 K ann; Shaffer 20 3/4 3 K LWS dbl; Shaffer 13 5/a” 5 K ann; Shaffer 13 5/a” 10K sgl and 10K dbl.

CRANES: Two Dreco Kingpost, model 48, 50t.

REMARKS: Formerly Dual Rig 38; zero discharge 2 owner-ENSCO Offshore International Co.

OTHER DATA: 40′ x 24′ cantilever.

WORK AREA: S.E. Asia.

ENSCO 52

CONSTRUCTION: Daewoo Shipbuilding. South Korea, 1983; refurbished 1998.

QUARTERS: 90 persons.

DRILLING EQUIPMENT. Top Drive-Varco TDS3.

DERRICK: Dreco 160′, 1,300,000 lb.

CRANES: Linkbelt 58/50t.

REMARKS: 40′ x 10′ cantilever; Formerly Dual Rig 42.

OTHER DATA: Typical ENSCO 50.

WORK AREA: S.E. Asia

ENSCO 53

DESIGN: Friede & Goldman L-780 Mod II.

CONSTRUCTION: Ingalls Shipyard, Pascagoula, Miss., 1982; Refurbished in 1998.

QUARTERS: 90 persons.

STORAGE: Bulk-8,675 cf; Liquid Mud-1,627 bbl; Fuel-2.470 bbl; Water for Drilling-5,200 bbl; Potable Water-1,350 bbl.

DRILLING EQUIPMENT. Drawworks-Nat’l 1625 DE; Pumps-Two Nat’l 12P 160; Prime movers– five Cat. D-399; Rotary Table-Nat’l C 375; Top Drive-Varco TDS-4H; three Derrick cascaded shakers.

DERRICK: 170′, ONO 1,500,000 lb.

BOP SYSTEM: Hydril 21 1/4 ann.; Shaffer 13 5/8″ 5 K ann.; Shaffer 13 5/a” 10K dbl and sgl.

CRANES: Two Dreco Kingpost model 48, 50 t.

REMARKS: Zero discharge. Formerly Glomar Main Pass III and Dual Rig 88. Owner-ENSCO Offshore International Co.

OTHER DATA: Typical ENSCO 50.

WORK AREA: S.E. Asia

ENSCO 54

DESIGN: Friede & Goldman L-780 Mod II,

CONSTRUCTION: China Shipbuilding. Taiwan, 1982; Refurbished in 1997.

QUARTERS: 80 persons.

HELIPORT: Sikorsky S61.

STORAGE: Mud & Cmt Bulk-8,604 cf+5,000 sks; Liquid Mud-2,000 bbl; Fuel-2,580 bbl; Water for Drilling-6,315 bbl; Potable Water–1,171 bbl.

DRILLING EQUIPMENT. Drawworks-Emsco C2; Pumps-Emsco FB 1600; Prime movers-three EMD 12-645-E8; Rotary Table-Emsco T3750; Top Drivs-Varco TDS-4H.

DERRICK: 170′ Dreco 1,000,000-lb static hook load,

BOP SYSTEM: Shaffer 21 1/4″, 2,000 psi ann.; Shaffer 13 5/a”. 5,000 psi ann.; CIW U 13 5/a”. 10K single & dbl.

CRANES: One Dreco 48DNS-120, 50t, one FMC Linkbelt ABS 238A, 50t.

REMARKS: Formerly Western Apollo III and Dual Rig 89; Refurbishhment included extension beam for 50′ cantilever.

OTHER DATA: Typical ENSCO 50.

WORK AREA: Gulf of Mexico.

ENSCO 55

DESIGN: Friede & Goldman Ltd., L-780, Mod II.

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss.. 1982.

QUARTERS: 74 persons.

VARIABLE LOAD: 4,080 kips.

HELIPORT: 62′ diameter.

STORAGE: Mud & Cmt Bulk-8,407 cf+4,000 ska; Liquid Mud–1,465 bbl; Fuel-2,481 bbl; Water for Drilling-5,200 bbl; Potable Water–1,348 bbl

DRILLING EQUIPMENT. Drawworks-Emsco C-2, 2.000 hp, 7838 brakes; Pumps-two Emsco FB-1600; Prime movers-three EMD 12-645-E8, 1,500-KW AC generators; Rotary Table-National C-375; Top Drive–Hydralift-HPS 500 E.

DERRICK: Emsco 160′, 1,400,000-lb GNC.

BOP SYSTEM: Shaffer 21 1/4″, 2 K diverter; Shaffer spher. 13 5/a”, 5K; CIW U 13 5/a”, 10 K single & dbl.

CRANES: Two FMC Linkbelt 218A, 50t.

REMARKS: Formerly Marine 302 and Dual Rig 91.

OTHER DATA: Typical Ensco 50.

WORK AREA: Mexico and Gulf of Mexico.

ENSCO 56

DESIGN: Friede & Goldman. Ltd., L-780 MOD II

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss, 1983.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 81 persons.

HULL 180′ x 175′ x 25′.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk-8,690 cf; Liquid Mud-1,600 bbl; Water for Drilling-5,200 bbl; Potable Water–1,348 bbl.

DRILLING EQUIPMENT. Drawworks-Nat’l 1625 DE: Pumps-two Nat’l 12-P-160; Prime movers– five Cat. D-399; Rotary Table-C-375 IRD, Top Drive-Varco TDS-4S.

DERRICK- 160′, 1,300,000-lb hook load capacity.

BOP SYSTEM: Annular, 21 1/4″. 2K; Shaffer 135/8″, 5 K ann.; CIW 135/8″ 10 K dbl. and sgl.

CRANES: Three Link Belt w/100′ booms.

MOORING: 1,500′ of 1 5/8 dia wire.

REMARKS: Formerly Bonito II and Clementine; zero discharge. Owner- ENSCO Offshore Partnership.

WORK AREA: Australia.

ENSCO 51

DESIGN: Friede & Goldman. Ltd., L-780 (Mod II). Cantilever skid-off capability

CONSTRUCTION: Ingalls Shipyard, Pascagoula, Miss, 1982.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 58 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,253 kips.

HELIPORT: 60′ x 60′, S-61 or equiv.

STORAGE: Mud & Cmt Bulk-7,200 cf; Liquid Mud-2,003 bbl; Fuel-2,481 bbl; Water for Drilling-5,200 bbl; Potable Water-1,348 bbl.

DRILLING EQUIPMENT. Drawworks–Midco U- 1220 EB; Pumps-GD PZ-10; Prime movers- five Cat. D-398 TA; Rotary Table-Oilwell R109B-143; Top Drive–Varco TDS-3.

DERRICK: 160′; 1,000,000-lb hook load capacity.

BOP SYSTEM: Shaffer 21 1/4″, 2,000 psi annular; Shaffer 13 5/8″, 5,000 psi annular; CIW U 13 5/8″, 10,000 psi single & dbl.

CRANES: One BMC 900, one FMC Linkbelt ABS-218A, 50t.

REMARKS: Formerly Huthnance Offshore’s Vanguard I and Dual Rig 41; zero discharge; skid off capable.

WORK AREA: Gulf of Mexico.

ENSCO 57

DESIGN: Friede & Goldman Ltd., L-780 (Mod II)

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss, 1982; Refurbished 1997.

QUARTERS: 110 persons.

HELIPORT: 72′ polygon.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320; Pumps–GD PZ-11; Prime movers–five Cat. D–398 TA; Rotary Table-Oilwell 37 1/2″; Top Drive–Varco TDS-3.

DERRICK: Branham 160′; 1,400,000 lb.

CRANES: Two Seaking D-1700, 20 t at 20′.

REMARKS: Owner-ENSCO Offshore International Co.

OTHER DATA: Typical ENSCO 51, except BOPs Shaffer 11″ 5K dbl. and sgl.

WORK AREA: S.E. Asia

ENSCO 60

DESIGN: Levingston; 1l-C

CONSTRUCTION: Levingston Shipbuilding, 1981; Refurbished 1997.

PERFORMANCE: Water depth-300′; Drilling depth–25,000′.

QUARTERS: 60 persons.

HULL: 200′ x 186′ x 23′.

VARIABLE LOAD: 4,450,000 lb.

HELIPORT: S-61 or equiv.

STORAGE: Mud & Cmt Bulk-6,000 of; Liquid Mud-1,142 bbl; Fuel–4,295 bbl; Water for Drilling-5,670 bbl; Potable Water–933 bbl.

DRILLING EQUIPMENT. Drammorks–Nat’l 1320 UE, electric G.E. SCR system; Pumps-two Nat’l 12-P-160; Prime movers–two EMD 16-645-E8, one EMD 12-645-E8; Rotary Table-Nat’l C-375 37 1/2″. Top Drive–Varco TDS-3.

DERRICK: DSI 160′; 1,000,000-lb hook load.

BOP SYSTEM: Hydril 21 1/4″, 2,000 psi annular; Shaffer ann., 13 5/8″, 5 K; CIW U 13 5/8″, 10K single & dbl.

CRANES: One FMC Linkbelt ABS-238A, 40 t, and ABS-218A, 50 t

REMARKS: Formerly Sonat-DF 87 and Dual Rig 87; zero discharge.

WORK AREA: Gulf of Mexico.

ENSCO 64

DESIGN: Marathon LeTourneau, Class 53, Slot.

CONSTRUCTION: Marathon Le Tourneau, Clyde Bank, Scotland, 1973: Refurbished 2001.

PERFORMANCE: Water depth–300′; Drilling depth–30,000′

QUARTERS: 74 persons.

HULL: 231′ x 200′ x 26′.

VARIABLE LOAD: 5,503,670 lb.

HELIPORT: 70.5′ diameter, S-61.

STORAGE: Mud & Cmt Bulk–6,280 cf + 2,500 sks,; Liquid Mud-1,590 bbl; Fuel–4.595 bbl; Water for Drilling–10,312 bbl; Potable Water– 1,010 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625DE; Pumps–two Nat’l 12-P-160; Prime movers–three EMD 16-645-E8, 6,600 hp; Top Drive-TDs 8.

DERRICK: Dreco 170; 2,000,000 lb.

CRANES: Three LeTourneau; PCM-120 AS.

REMARKS: Formerly Penrod 64; zero discharge; HPHT.

WORK AREA: Gulf of Mexico.

ENSCO 67

DESIGN: Marathon LeTourneau, Class 84 Slot Type

CONSTRUCTION: Marathon LeTourneau, Clydebank, Scotland, 1976.

PERFORMANCE: Water depth–380′; Drilling depth–30,000′.

QUARTERS: 72 persons.

HULL: 247′ x 227′ x 26′.

VARIABLE LOAD: 7,574.000 lb.

HELIPORT: 70,5′ diameter, S-61.

STORAGE: Mud & Cmt Bulk–6,240 cf; Liquid Mud-1,605 bbl; Fuel–5,290 bbl; Water for Drilling–10,539 bbl; Potable Water-1,294 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 UE, 2,000 hp; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–three EMD 16-645E-8, 2,200 hp each; Top Drive–TDS-4H.

DERRICK: 160′ x 30′ T-leg; 1,000,000-lb hook load.

BOP SYSTEM: Hydril MSP 211/4, 2 K; Shaffer 13%”, 5K; CIW 13%”, 10K single &dbl.

CRANES: Three LeTourneau PCM-120 AS.

REMARKS: Formerly Penrod 67 and ENCO 01; zero discharge.

WORK AREA: Mexico and Gulf of Mexico.

ENSCO 68

CONSTRUCTION: Marathon LeTourneau Vicksburg, Miss., 1976; Refurbished 2001.

PERFORMANCE: Water depth–380′; Drilling depth–30,000′.

QUARTERS: 77 persons.

VARIABLE LOAD: 5,566,540 lb.

HELIPORT: 70′ dia.

DERRICK: 170′, 2,000,000 lb.

REMARKS: Formerly Penrod 68.HPHT

OTHER DATA: Typical of ENSCO 67 except Tesco top drive.

WORK AREA: Gulf of Mexico.

ENSCO 69

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss. 1976; Refurbished 1996.

PERFORMANCE: Water depth–380′; Drilling depth–30,000′.

VARIABLE LOAD; 7,573,800 lb.

DERRICK: 170′, 1,500,000 lb hook load.

REMARKS: Formerly Penrod 69; Skid off capable and zero discharge.

OTHER DATA: Typical of ENSCO 67.

WORK AREA: Gulf of Mexico.

ENSCO 70

DESIGN: Hitachi K-1032N.

CONSTRUCTION: Hitachi, Japan, 1981.

PERFORMANCE: Water depth–250′ (North Sea); Drilling depth-25,000′.

QUARTERS: 72 persons.

HULL: 230′ x 250′ x 23′.

VARIABLE LOAD: 4,250 mt.

HELIPORT: 82′ octagon, S-61.

STORAGE: Mud & Cmt Bulk–10,000 cf; Liquid Mud-1,700 bbl; Fuel–2,450 bbl; Water for Drilling–5,350 bbl; Potable Water-1,200 bbl; Base Oil–870 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1,625 DE; Pumps–three Nat’l 12-P-160; Prime movers–five Cat. D-399, TA; Rotary Table-Nat’l C-375; Top Drive–Varco TDS-4H.

DERRICK: Dreco 160′; 1,875,000-lb hook load capacity.

BOP SYSTEM: One Regan KFDJ, 27 1/2 “, 2,000 psi; One Shaffer SLX, 15 K stack, four 15 K + spherical 10K; one CIW 10K stack, three 10 K+ 5 Kann.

CRANES: Two Nat’l OS-215 w/140/120′ booms.

REMARKS: Formerly Lauritzen’s Dan Duke; zero discharge.

WORK AREA: North Sea.

ENSCO 71

DESIGN: Hitachi K-1032N.

CONSTRUCTION: Hitachi Zosen, Japan, 1982.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320-UE; Pipe Handling-Varco AR 3000 Iron Roughneck.

BOP SYSTEM: Regan 27 1/2″, KFDJ, 2 K Hydril 13%”, C-K, 5K; Hydril 13%”, 10K single & dbl.

OTHER DATA: Typical ENSCO 70. Formerly Lauritzen’a Dan Earl.

WORK AREA: North Sea.

ENSCO 72

DESIGN: Hitachi K-1032N.

CONSTRUCTION: Hitachi, Japan, 1961; refurbished 1996.

HELIPORT: 82′ octagon, S61.

STORAGE: Mud & Cmt Bulk–10,000 cf; Liquid Mud-1,625 bbl; Fuel–2,399 bbl; Water for Drilling–5,367 bbl; Potable Water-1,213 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 US; Pumps-three Nat’l 12-P-160; Pipe Handling System–MH Iron roughneck; Top Drive-MHDDM HY 500.

DERRICK: Dreco 160′; 1,500,000-lb.

BOP SYSTEM: Regan 27 1/2″, KFDJ. 2 K; Hydrill 21 1/4″, MSP, 2K; Hydril 13%”, GK, 5K; CIW type U 10K dbl./sgl.

CRANES: Two Nat’l OS-215.

REMARKS: Formerly Ocean Benarmin, Benarmin Explorer and Ross Explorer.

OTHER DATA: Typical ENSCO 70.

WORK AREA: North Sea.

ENSCO 80

DESIGN: Marathon LeTourneau, Clans 116.

CONSTRUCTION: Marathon LeTourneau, Clyde-bank, Scotland, 1978 and 1995.

PERFORMANCE: Water depth–210′; Drilling depth–30,000′.

QUARTERS: 90 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 7,965 kips.

HELIPORT: 74′ octagon, S-61 N.

STORAGE: Mud & Cmt Bulk–8,946 cf; Liquid Mud–1,856 bbl; Fuel–4,288 bbl; Water for Drilling–2,016 bbl; Potable Water–1,760 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625-DE; Pumps–Three Nat’l 12-P-160; Prime movers–Three cat D-399TA, two Cat 3576; Rotary Table-Nat’l C-375; Top Drive-Varco TDS-4H.

DERRICK: Dreco, 160′; 1,500,000-lb hook load.

BOP SYSTEM: Regan 2 K KFDJ; Shaffer 20 3/4″, 3 K dbl; Saffer 21 1/4″,2 K ann.; Hydril 13%”, 5 K ann.; CIW U, 10K single & dbl.

CRANES: Three LeTourneau PCM-120.

REMARKS: Owned/operated by ENSCO Offshore (UK). Formerly Penrod 80; zero discharge.

WORK AREA: UK North Sea.

ENSCO 85

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1981.

PERFORMANCE: Water depth–210′; Drilling depth-25,000′.

QUARTERS: 84 persons.

VARIABLE LOAD: 2,893 mt.

HELIPORT: 73′ dia, S-61.

STORAGE: Mud & Cmt Bulk-9,250 cf; Liquid Mud–1,634 bbl; Fuel–7,360 bbl; Water for Drilling–8,985 bbl; Potable Water–1,294 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-three Nat’l 12-P-160 Triplex; Prime movers–one EMD 12645 E8, two EMD 12645-E9; Rotary Table-Nat’l C-375; Top Drive-Varco TD54.

DERRICK: 160′; 1,000.000 lb.

BOP SYSTEM: Regan 29 1/2″ KFDJ, 2 K; Hydril MSP, 2 K; CIW U, 10 K, single & dbl; 13%”, Hydril 5 K annular.

CRANES: Three LeTourneau PCM 120 AS; 45-ton @ 25′; 100′ boom; one Dreco Series 48 King post.

REMARKS: Owned/operated by ENSCO Offshore (UK). Formerly Penrod 85; zero discharge.

WORK AREA: UK North Sea.

ENSCO 92

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1962/1996.

PERFORMANCE: Water depth–210′; Drilling depth–25,000′.

QUARTERS: 84 persons

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 6,800 kips.

HELIPORT: 73′ dia, S-61.

STORAGE: Mud & Cmt Bulk–9,216 cf; Liquid Mud–1,824 bbl; Fuel-7,160 bbl; Water for Drilling–8,243 bbl; Potable Water–1,294 bbl.

DRILLING EQUIPMENT: Drawworka–Nat’l 1320 UE; Pumps–three Nat’l 12-P-160; Prime movers–three EMD 12-cyl., 6,650 hp; Rotary Table–Nat’l C-375; Pipe Handling-Varco PH-85; Top Drive–Varco TDS-4H.

DERRICK: Superior 170′, 1,000,000 lb.

BOP SYSTEM: Hydril 13%”, 5K; CIW U, 13%” 10 K single & dbl; Regan KFDJ diverter; 2%” Hydril MSP 2 K.

CRANES: Three Marathon LeTourneau PCM-120; one Dreco 46 King Post.

REMARKS: Owned/operated by ENSCO Offshore (UK). Formerly Penrod 92; zero discharge.

WORK AREA: UK North Sea.

ENSCO 81

DESIGN: Marathon LeTourneau, Class 116-C

CONSTRUCTION: Marathon LeTourneau, Clydebank, Scotland, 1979.

PERFORMANCE: Water depth–350′; Drilling depth–25,000′.

QUARTERS: 72 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 5,522,830 lb.

HELIPORT: S-61 or equiv.

STORAGE: Mud & Cmt Bulk–8,160 cf; Liquid Mud–1,471 bbl; Fuel-6,786 bbl; Water for Drilling–10,897; Potable Water–1,290 bbl.

DRILLING EQUIPMENT: Drawarorks–Nat’l 1320UE; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–three EMD model MD 16-645-E8; Rotary Table-Nat’l C-375; Top Drive-Varco TDS-4H.

DERRICK: Dreco Ltd. 160′; 1,000,000-lb hook load.

BOP SYSTEM: Hydril MSP, 21 1/4″, 2 K; Shaffer 13%”, 5 K; CIW U, 13%”, 10 K; two singles & one dbl.

CRANES: Three LeTourneau PCM-120AS

REMARKS: Formerly Penrod 81; zero discharge; 59.5′ cantilever reach; four Ram BOP.

WORK AREA: Gulf of Mexico.

ENSCO 82

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1979

PERFORMANCE: Water depth–300′; Drilling depth–25,000′

VARIABLE LOAD: 5,150,410 lb.

HELIPORT: S-61

STORAGE: Mud & Cmt Bulk–6,880 cf; Liquid Mud–1,600 bbl; Fuel–8,600 bbl; Water for Drilling–9,696 bbl; Potable Water–1,300 bbl.

DERRICK: Derrick service International 160′,1,000.000 lb.

REMARKS: Formerly Penrod 82; cantilever beam extensions for 52′; zero discharge for Mobile Bay.

OTHER DATA: Typical ENSCO 81.

WORK AREA: Gulf of Mexico.

ENSCO 87

DESIGN: Marathon LeTourneau 116-C

CONSTRUCTION: Marathon LeTourneau, Vicksurg, Miss, 1962

VARIABLE LOAD: 6,039 kips.

HELIPORT: S-61.

STORAGE: Mud & Cmt Bulk–6,860 cf; Liquid Mud–1,467 bbl; Fuel–8,476 bbl; Water for Drilling–9,727 bbl; Potable Water–1,294 bbl.

DRILLING EQUIPMENT: Prime movers-three EMD 12-645E8.

DERRICK: Superior 160′, 1,000,000 lb.

BOP SYSTEM: Hydril MSP, 21%”, 2 K; Shaffer 13%”, 5 K; Saffer SL 13%”, 10 K; two singles & one dbl.

REMARKS: Formerly Penrod 87; extensions for 52′ cantilever reach; four Ram BOP; zero discharge.

OTHER DATA: Typical ENSCO 81.

WORK AREA: Gulf of Mexico

ENSCO 83

DESIGN: Marathon LeTourneau, class 82 SD-C

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1979

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 72 persons.

HULL: 207′ x l76 x 20′.

VARIABLE LOAD: 3,557 klps.

HELIPORT: S-61 or equiv.

STORAGE: Mud & Cmt Bulk–7,700 cf; Liquid Mud–1,444 bbl; Fuel–2,287 bbl; Water for Drilling–6,655 bbl; Potable Water–983 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE; Pumps-two Nat’l 12P–160; Prime movers- three EMD 12–645-E8; Rotary Table-Nat’l 0-375; Top Drive–Varco TDS-4H.

DERRICK: 160′, 1,000,000 lb.

BOP SYSTEM: Shaffer 13%”, 5 K ann; Shaffer 13 5/8″, 10 K single & dbl.

CRANES: Three LeTourneau PCM–120 AS.

REMARKS: Formerly Penrod 83.

WORK AREA: Gulf of Mexico.

ENSCO 84

DESIGN: Marathon LeToumeau, Class 82-SD-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1981.

QUARTERS: 86 persona.

VARIABLE LOAD: 3,889,740 lb.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud-1,470 bbl; Fuel–2,200 bbl; Water for Drilling–6,600 bbl; Potable Water–980 bbl.

REMARKS: Formerly Penrod 84.

OTHER DATA: Typical ENSCO 83, four-mm stack.

WORK AREA: Gulf of Mexico.

ENSCO 86

DESIGN: Class 82-SD-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1081; refurbished 1991.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 68 persons.

VARIABLE LOAD: 3,482,280 lb.

STORAGE: Mud & Cmt Bulk–7,700 of; Liquid Mud–1,470 bbl; Fuel–2,000 bbl; Water for Drilling–4,000 bbl; Potable Water–980 bbl.

DRILLING EQUIPMENT: Drawwork–Nat’l 1625 UDEE; Prime movers-three EMD 12-645-E9.

DERRICK: 160′; 650 t. hook load capacity.

REMARKS: Formerly Penrod 86.

OTHER DATA: Typical ENSCO 83, four-ram stack.

Zero discharge.

WORK AREA: Gulf of Mexico (Mobile Bay).

ENSCO 88

DESIGN: Marathon LeTourneau, Class 82 SD-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville. Texas, 1982.

QUARTERS: 72 persons.

VARIABLE LOAD: 3,482,280 lb.

REMARKS: Formerly Penrod 88.

OTHER DATA: Typical of ENSCO 83, four-ram stack. Cantilever ext 7′.

WORK AREA: Gulf of Mexico.

ENSCO 89

DESIGN: Marathon LeTourneau, Class 82 SD-C.

CONSTRUCTION: Marathon LeTourneau, Vickaburg, Miss, 1982.

VARIABLE LOAD: 3,381,130 lb.

BOP SYSTEM: Shatter 21 1/4″, 2 K; Hydril GL 131/4″, 5 K ann; CIW U 136/8″, 10 K, two singles & dbl.

REMARKS: Formerly Penrod 89.

OTHER DATA: Typical of ENSCO 83. Zero oil base mud discharge.

WORK AREA: Gulf of Mexico.

ENSCO 90

DESIGN: Marathon LeTourneau 82 SD-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville. Texas, 1982.

QUARTERS: 72 persons.

VARIABLE LOAD: 4,144,980 lb.

REMARKS: Formerly Penrod 90. 7′ cantilever extensions.

OTHER DATA: Typical of ENSCO 83. Zero oil base mud discharge.

WORK AREA: Gulf of Mexico.

ENSCO 93

DESIGN: Marathon LeTourneau 82 SD-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1982.

VARIABLE LOAD: 3,746,020 lb.

REMARKS: Formerly Penrod 93. 7′ cantilever extensions.

OTHER DATA: Typical of ENSCO 83.

WORK AREA: Gulf of Mexico.

ENSCO 97

DESIGN: Marathon LeTourneau, 82-SD-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville. Texas. 1980.

QUARTERS: 89 persons.

STORAGE: Mud & Cmt Bulk–9,600 cf; Uquld Mud–1,753 bbl; Fuel–2,368 bbl; Water-for Drilling–5,000 bbl; Potable Water–984 bbl.

DRILUNG EQUIPMENT: Drawworks–Emsco C2, 2,000 hp; Pumps–Ersaco FE-1600.

BOP SYSTEM: Shaffer ann, 21 1/4″, 2 K; Shatter ann. 13 1/4″. 5K; CIW U 13%”. 10K, single/dbl.

REMARKS: Formerly Keyes 250. Marine 250 and Dual Rig 88; zero discharge. 7′ cant. ext. can be used to give 47′ x 12′ cant. reach. Owner-ENSCO Offshore International Co.

OTHER DATA: Typical ENSCO 83.

WORK AREA: Middle East.

ENSCO 98

DESIGN: Marathon LeTourneau, Vicksburg, Miss., Class 82-SD-C.

CONSTRUCTION: Marathon LeTourneau, 1977.

VARIABLE LOAD: 3.485,950 lb.

DRILLING EQUIPMENT: Top Drive–Varco TDS-3.

DERRICK: 160′; 500-ton hook load capacity.

REMARKS: Formerly Pernod 63 and ENSCO 63.

OTHER DATA: Typical ENSCO 83. Cantilever extension, 7′.

WORK AREA: Gulf of Mexico.

ENSCO 99

DESIGN: Marathon LeTourneau Class 82-SD-C.

CONSTRUCTION: Built by Marathon. Brownsville. Texas. 1985.

PERFORMANCE: Water depth–250′; Drilling depth–0,000′.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–two Nat’l. 12-P-160; Prime Movers–three EMD MD 12 845 E9B; Rotary Table–Nat’l D-375: Top Drive–TDS S. DERRICK: 160′; 1,348.000 lb hook load.

BOP SYSTEM: Shaffer 211/4″ 2K ann and 13 1/4″ 5 K ann; Shatter SL 13 1/4%” 10K, two singles & dbl.

CRANES: Three LeTourneau RD 120 AS.

REMARKS: Formerly Penrod 99.

OTHER DATA: Typical ENSCO 86

WORK AREA: Gulf of Mexico (Mobile Bay).

ENSCO 94

DESIGN: Hitachi Zosen, 0-250 Cantilever

CONSTRUCTION: Hitachi Zosen, Japan, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 78 persons.

HULL: 193.5′ x 174′ x 21′.

VARIABLE LOAD: 4,609,000 lb.

HELIPORT: S-61.

STORAGE: Mud & Cmt Bulk–8000 cf; Uquid Mud-1,276 bbl; Fuel–2,500 bbl; Water for Drilling–4,603 bbl; Potable Water-1,700 bbl.

DRILUNG EQUIPMENT; Drawworks–Nat’l 1320 UE; Pumps–two Nell 12-P-160 Triplex; Prime movers–three EMD MD-12–645-E8; Rotary Table–Nat’l C-375; Top Drive–Varco TDS 4H.

DERRICK: Superior 160′; 1,200,000-lb.

SOP SYSTEM: Shaffer 21 1/4″ 2 K ann; Shatter GL 13 1/4″, 5 K; Shaffer SL. 13 6/8″, 10 K, two dbls.

CRANES: two Marathon LeTourneau, PCMi2OAS.

REMARKS: Zero discharge rig. Formerly Penrod 94. Prober, ENSCO 1; 1,700,000-lb cantilever loading.

WORK AREA: Gulf of Mexico (Mobile Bay).

ENSCO 95

DESIGN: HitachiZosen C-250.

CONSTRUCTION: Hitachi Zosen, Japan, 1981.

QUARTERS: 72 persons.

VARIABLE LOAD: 4.816.000 lb.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–1,700 bbl; Fuel–2,554 bbl; Water for Drilling–3.360 bbl; Potable Water–1,501 bbl.

DERRICK: Superior 163′. 1,000.000 lb.

BOP SYSTEM: Hydril MEP 21 1/4″, 2 K; Shatter 13 5/8″. 5 K; CIW U 13 5/8″, 10 K single & dbl.

REMARKS: Formerly Penrod 95; 1,700,000–lb cantilever loading. Equippad for oil- base mud.

OTHER DATA: Typical of ENSCO 94. ENSCO 2.

WORK AREA: Gulf of Mexico.

ENSCO 96

DESIGN: Hitachi Zosen, C-250.

CONSTRUCTION: Hitachi Zosen, Osaka, 1982, refurbished 1997.

PERFORMANCE: Water depth-250′; Drilling depth-1,9,500′.

QUARTERS: 82 persons.

HULL: 193.5x 174′ x21′.

HELIPORT: Octagon. 70.6′.

DRIWHG EQUIPMENT: Top Drive–Varco TDS-3.

DERRICK: Dreco 160,1,400,000 lb.

BOP SYSTEM: 2K Shaffer 211/4″ ann., 3K Shaffer 20 3/4″ dbl., 5K Shatter 13 5/8″ ann., 10K CIW 13 5/8″ sgl./dbl.

REMARKS: Formerly Penrod 96. Essex end Dual Rig 96; 1.700,000–lb cantilever loading. Owner ENSCO Offshore International Co.

OTHER DATA: Typical ENSCO 94.

WORK AREA: Middle East.

ENSCO 100

DESIGN: Marathon LeTourneau 150-88-C Enhanced Gorilla

CONSTRUCTION: UIE. Clydebank, UK, 1987, refurbished 2000.

PERFORMANCE: Water depth–328′; Drilling depttr–25.000′.

QUARTERS: 108 persons.

HULL: 297′ x 292′ x 30′.

VARIABLE LOAD: 4,678 t.

HELIPORT: 83′, S-61.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE. 3.000 hp; Pumps–Three Nat’l 12-P-160, 1.600 hp; Prime movers–Four GM EMD 16–645E8. 1.440 hp; Top Drive–Varco TDS-4H.

DERRICK: Woolalayer 160,1,500,000 lb.

BOP SYSTEM: Hydri PEP 2 K, 28″ diverter; Shaffar sper.211/4″, 2 K ann.; Hydril GX 131/4″, 10 K ann; Shatter LWS 211/4″, 2 Kdbl.; two CIW U 131/4″, 15 K dbl.

CRANES: Three LeTourneau PCM-350-SS, 75 t; one LeTourneau PCM 120-AS, 50t.

REMARKS: Formerly Smedvig’s West Omikron. Owner – ENSCO Offshore International Co.

WORK AREA: North Sea.

ENSCO 101

DESIGN: Keppel Fels enhanced Mod. V

CONSTRUCTION: Keppel Feis. Singapore, 2000.

PERFORMANCE: Water depth–350′; Drilling depth–30,000′.

DUARTERS: 104 persons.

HULL: 228′ x 222′ x 30′.

VARIABLE LOAD: 8,300 t.

DRIWNO EQUIPMENT; Drawwoks–Nat’l 1625-DE, 3.000 hp; Pumps-Three Nat’l 14-P-220, 2,200 hp; Prime movers–Six Cat. 3516 B; Rotary Table–Nat’I D-495, 49 N”; Top Drive-Varco TDS-4H.

DERRICK: 170′ x 40′ x 40′; 1,500,000-lb hook cad cap.

BOP SYSTEM: One ABS KFDJ 47, 2 K diverter; one Shatter spher. 183/4″, 10 K ann.; Shatter 18%. 15 K dbl.

CRANES: Three Dreco 72.

MOORING: Four 2,300′ x 2″ wire.

REMARKS: Zero discharge; North Sea standard, 70′ 30′ high-capacity cantilever, on center line, 2,100 kips @ 70′. Owner – ENSCO Offshore International Co.

WORK AREA: North Sea.

ENSCO 102

DESIGN: KFELS MOD V.

CONSTRUCTION: Keppel FELS, Singapore. 2002.

PERFORMANCE: Water depth-400′; Drilling depth-30,000′

QUARTERS: 108 persons

HULL: 246′ x 22′ x 30′

VARIABLE LOAD: N/A

HELIPORT; S-61 or equivalent

STORAGE: Mud & Cmt. Bulk- 17,600 cu ft plus 5.000 sacks; Uquid Mud–4,900 bbl; Fuel–3,700 bbl; Water for Drilling–9,000 bbl; Potable Water–3,700 bbl

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 UDBE 3,000 hp; Pumps–Three Nat’l 14P-220 triplex, 2,200hp; Prime movers–Six Cat. 3516, 11.130hp; Rotary Tabie–Nat’l D 495, 49%”; Top Drive-Varco TDS-4H

DERRICK: Dreco 170′, 1,929 kips gross nom. capacity.

BOP SYSTEM: Shatter 211/4″, 2 K ann.; Shatter 13 5/8″, 5 K ann.; Shatter 13 5/8″, 10 K sgi.; Shaffer 183/4″, 15 K, 4 rams/ 1 ann.

CRANES: Three Dreco 72 DNS-140-1, 55 t @ 70′, 2 x 120′, 1 x 140′.

WORK AREA: Owner – ENSCO Offshore International Co.

Foresight Drilling

FORESIGHT DRILLER V

DESIGN: Self-elevating cantilever (38′) jackup.

CONSTRUCTION: Far East Levingston Shipbuilding, Singapore, 1978.

PERFORMANCE: Water depth-8.5′-150′; Drilling depth-12,000′.

QUARTERS: 70 persons.

HULL: 154′ x 132′ x 159″.

STORAGE: Mud & Cmt Bulk–4,000 cf; Liquid Mud–953 bbl; Fuel–1,296 bbl; Water for Drilling bbl; Potable Water-1,590 bbl.

DRILLING EQUIPMENT: Drarereorks-OIME 1,000–E, 750 hp; Pumps–Two Gardner Denver PZ-28 triplex; Prime movers–Three Cat. D-399, w/1,050 kW AC gen; Rotary Table-271/2″.

DERRICK: Pool designed, 130′; 500–kip capacity.

CRANES: EMC 900.

REMARKS: Formerly Pool Arabia’s Pool 144 and Mike Mallen Energy Equipment Resources. Inc.’s Odin Moon.

WORK AREA: Persian Gulf.

Former Soviet Union

REMARKS: These jackups are reportedly still located in Russia or Azerbaijan. For more details and photos, see the RIGZONE website: www.rigzonecom.

Chernomorneftegaz

SIVASH

DESIGN: CD&EB Coral

CONSTRUCTION: Sevastopol USSR, 1978.

WORK AREA: Eastern Ukraine.

Gazprom

GAZPROM 1

DESIGN: 0DB Korrall, Arctic Class.

CONSTRUCTION: Russia, 1998.

REMARKS: Ready stacked, Russia

Lukoil

ASTRA

DESIGN: BMC 150 H cantilever

CONSTRUCTION: Nippon Kokan Shipbuilding, Japan, 1983.

PERFORMANCE: Water depth-1,50; Drilling depth-15,000′.

QUARTERS: 82 persons.

HULL: 174′ x 162’S’ x 18′.

VARIABLE LOAD: 4,200 kips. inc’l hook load.

HELIPORT: 62′ hexagonal for S-61.

STORAGE: Mud & Cmt Bulk–3,200 cf + 1,700 bbl; Fuel-1,500 bbl; Water for Drilling-3,280 bbl; Potable Water-1,250 bbl.

DRILLING EQUIPMENT: Drereworks–Ideco 900 ED; Pumps-Two deco T, 1,000 hp triplex; Prime movers-four Cat D-398; Rotary Table-Ideco 371/2″.

DERRICK: Pyramid 147′, 825,000 lb.

BOP SYSTEM: CIW 13 5/8″, 5,000 psi stack, one annular, three rams w/Koomey E/H hyd. control.

CRANES: Two BLM 20 t, 92′ boom.

REMARKS: Formerly owned by Stavenger Drilling AS.

WORK AREA: Caspian.

Sakhalinmor

EKHABI

DESIGN: MSC CJ50

CONSTRUCTION: FELS, Singapore, 1984.

REMARKS: Managed by Jet Drilling

WORK AREA: Middle East.

OKHA

DESIGN: Levingston Ill-S.

CONSTRUCTION: Mitsui, japan, 1980.

REMARKS: Managed by Far East Marine Co., (FEMCO).

WORK AREA: Sakhalin.

SAKHALINSKAYA

DESIGN: Gusto

CONSTRUCTION: Rauma Repola, Finland, 1985.

REMARKS: Managed by Far East Marine Co., (FEMCO).

WORK AREA: Middle East

KURILSKAYA

DESIGN: Korall.

CONSTRUCTION: Vyborg, Russia, 1993.

REMARKS: Managed by Momentum Engineering.

WORK AREA: Middle East.

SOCAR

KHAZAR 1

DESIGN: Cantilever.

CONSTRUCTION: Astrakhan, USSR, 1980.

REMARKS: Formerly 60 years of October, Kaspy 2.

WORK AREA: Caspian

KHAZAR 2

DESIGN: Sonat Orion class.

CONSTRUCTION: Astrakhan, USSR, 1982

REMARKS: Formerly 26th Communist Party.

WORK AREA: Caspian

KHAZAR 3

DESIGN: Baker BMC-250-IC.

CONSTRUCTION: Astrakhan, USSR, 1983.

REMARKS: Formerly 28th of April

WORK AREA: Caspian

KHAZAR 4

DESIGN: Arctic class cantilever.

CONSTRUCTION: Astrakhan, USSR, 1985.

REMARKS: Formerly 40 Years of Victory, Kaspy Ill.

WORK AREA: Caspian.

KHAZAR 5

DESIGN: Arctic class cantilever

CONSTRUCTION: Astrakhan, USSR. 1987

WORK AREA: Caspian

KHAZAR 6

DESIGN: IHC. slot.

CONSTRUCTION: IHC Gusto, Netherlands, 1967.

WORK AREA: Caspian.

Vietsovpetro

CUU LONG

DESIGN: Levingston 111-C.

CONSTRUCTION: Rio de Janeiro, 1982.

REMARKS: Formerly Montreal IV, and Petrobras VIII.

WORK AREA: Viet Nam

TAM DAO

DESIGN: MSC CJ50.

CONSTRUCTION: Levingston, Singapore, 1988.

WORK AREA: Viet Nam.

Global Marine Drilling Co.

GLOMAR ADRIATIC I

DESIGN: Marathon LeTourneau 116-C

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1981.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′

QUARTERS: 90 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,676 t.

HELIPORT: 71′ diameter.

STORAGE: Mud & Cmt Bulk–9,800 cf; Liquid Mud–1,925 bbl; Fuel–2,800 bbl; Water for Drilling–13,055 bbl; Potable Water–1,217 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE; Pumps–two Nat’l 12-P-160; Prime movers–five Cat D-399; Rotary Table–Nat’l C-375; Top Drive–Varco TDS-3.

DERRICK: 160′: 1,250,000 lb static hook load.

BOP SYSTEM: Two double 13%”, 10,000 psi rams, one 13%”, 5,000 psi wp annular preventer.

CRANES: Three LeTourneau PCM-120 with 100′ booms, 50 st @24′.

REMARKS: Unit equpped with 15′ canilever extension.

WORK AREA: West Africa.

GLOMAR ADRIATIC II

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1981.

PERFORMANCE: Water depth–328′.

QUARTERS: 88 persons.

BOP SYSTEM: One single/one double 13%”, 10,000 psi rams; one 13%”, 5,000-psi wp annular preventer.

OTHER DATA: Typical of Glomar Adriatic I; Top Drive–Varco TDS-3H.

WORK AREA: Gulf of Mexico

GLOMAR ADRIATIC III

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Davie Shipyards, Quebec, Canada, 1982.

PERFORMANCE: Water depth 328′.

QUARTERS: 96 persons.

HELIPORT: 73′ dia.

REMARKS: Zero discharge. Modified to accept 15′ cantilevered extensions.

OTHER DATA: Typical Glomar Adriatic I.

WORK AREA: Gulf of Mexico.

GLOMAR ADRIATIC IV

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1983.

PERFORMANCE: Water depth: 328′.

VARIABLE LOAD: 2,600 st.

HELIPORT: 73′ dia.

REMARKS: Zero discharge. Modified for 15′ cantilever extensions.

OTHER DATA: Typical Glomar Adriatic I; Top Drive–Varco TDS-3H.

WORK AREA: Gulf of Mexico.

GLOMAR ADRIATIC V

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1979.

PERFORMANCE: Water depth-300′; Drilling depth–20,000′.

QUARTERS: 76 persons.

VARIABLE LOAD: 2,782 st.

HELIPORT: 72′ dia.

STORAGE: Mud & Cmt Bulk–9,250 cf; Liquid Mud–1,942 bbl; Fuel–3,000 bbl; Water for Drilling–13,226 bbl; Potable Water-1,282 bbl.

DRILLING EQUIPMENT: Prime movers–Three GM EMD 16-645.

REMARKS: HYDRIL: Hydril 21%”, 2,000 psi; Hydril 13%”, 5.000 psi; CIW U single/double 13%”, 10.000 psi. Formerly Transocean 5. Unit available w/7′ cantilever extension.

OTHER DATA: Typical Glomar Adriatic I.

WORK AREA: West Africa.

GLOMAR ADRIATIC VI

DESIGN: Marathon LeTourneau 116-C

CONSTRUCTION: Marathon LeTourneau, Singapore. 1981.

PERFORMANCE: Water depth–300′ (210 North Sea operation): Drilling depth–20,000′.

QUARTERS: 82 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,410 st.

HELIPORT: 72′ dia.

STORAGE: Mud & Cmt Bulk–9,100; Liquid Mud-1,896 bbl; Fuel–3,070 bbl; Water for Drilling–11,540 bbl; Potable Water–1,282 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3 Type II; Pumps–Two Emsco FB-1600 triplex; Prime movers–Three GM EMD 16-645; Rotary Table–C. Emsco T 3750; Top Drive–Varco TDS-3H.

DERRICK: 160′; 1,040,000-lb Static hook load.

BOP SYSTEM: Hydril 13%”, 5,000 psi; CIW U single/double 13%”, 10.000 psi.

CRANES: Three LeTourneau PCM-120, two w/120′ booms, one w/ 100′ boom, 50 st @ 24′.

REMARKS: Formerly Transocean 6. Modified to accept 15′ cant. extensions.

WORK AREA: North Sea.

GLOMAR ADRIATIC VII

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1983

PERFORMANCE: Water depth–328′.

QUARTERS: 84 persons.

VARIABLE LOAD: 2,104 st.

STORAGE: Mud & Cmt Bulk-10,580 cf; Liquid Mud–1,917 bbl; Water for Drilling–10,070 bbl; Potable Water–2,687 bbl.

DRILLING EQUIPMENT: Top Drive–Varco TDS-4H.

DERRICK: 160′; 1,000,000-lb static hook load.

REMARKS: Formerly Transocean 7; modified to accept 15′ cant, extensions.

OTHER DATA: Typical Glomar Adriatic VI.

WORK AREA: Trinidad.

GLOMAR ADRIATIC VIII

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Euroasia Shipyard, Hong Kong, 1983.

PERFORMANCE: Water depth–328′.

QUARTERS: 84 persons.

DRILLING EQUIPMENT: Top Drive–Varco TDS-4S

DERRICK: 160′; 1,000,000-lb static hook load.

CRANES: Three LeTourneau PCM-120, two w/120′ booms, one w/ 100′ boom, 50 st @ 24′.

OTHER DATA: Typical Glomar Adriatic I.

WORK AREA: West Africa.

GLOMAR ADRIATIC IX

DESIGN: Marathon LeTourneau 116-C

CONSTRUCTION: UIE Shipbuilding (Scotland) Ltd., Clyde Bank, 1981.

PERFORMANCE: Water depth–328′; Drilling depth–20,000′.

QUARTERS: 97 persona.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,817 st.

HELIPORT: 65′ dia.

STORAGE: Mud & Cmt Bulk–9,520 cf; Liquid Mud–2,085 bbl; Fuel–6,500 bbl; Water for Drilling–12,070 bbl; Potable Water–2,786 bbl.

DRILLING EQUIPMENT: Drawworks–Ideco 2100 DE; Pumps–Two ldeco T1600-7; Prime movers–Five Cat. D-399 TA; Rotary Table–Ideco LR-375E; Top Drive–Varco TDS-3S.

DERRICK: 160′; 1,000,000-lb static hook load.

BOP SYSTEM: Cameron 13%”, 10,000 psi, 3 rams; 13%”, 10,000-psi annular.

CRANES: Three LeTourneau PCM-120 w/ 100′ booms, 50 st @ 24′.

MOORING: Four 10,000-lb LWT anchors.

REMARKS: Formerly Uxmal. Modified to accept 15′ cant. extensions.

WORK AREA: West Africa.

GLOMAR ADRIATIC X

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: UIE Shipbuilding (Scotland) Ltd., Clyde Bank, 1982

QUARTERS: 98 persons.

VARIABLE LOAD: 3,162 st.

REMARKS: Formerly Chichen ltza.

OTHER DATA: Typical Glomar Adriatic IX.

WORK AREA: Gulf of Mexico.

GLOMAR ADRIATIC XI

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: UIE Shipbuilding (Scotland), 1982.

PERFORMANCE: Water depth–300′ (200′ in North Sea operations); Drilling depth–25,000′.

QUARTERS: 100 persona.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,404 st.

HELIPORT: 72′ dia.

STORAGE: Mud & Cmt Bulk–9,480 cf; Liquid Mud-1,988 bbl; Fuel–6,400 bbl; Water for Drilling–7,718 bbl; Potable Water–2,790 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–Nat’l 12 P 160: Prime movers–five Cat D-399; Rotary Table–Nat’l D 495; Top DriveVarco TDS-45.

DERRICK: 160′, 1,375,000-lb static hook load BOP SYSTEM: 13%’, 10,000 pal; 15,000 psi C&K manifold.

CRANES: Three LeTourneau PCM-120; one NatI OS435; BOP bridge crane.

REMARKS: 60′ cantilever; enclosed cellar deck; formerly Bay Driller.

WORK AREA: UK North h Sea

GLOMAR BALTIC

DESIGN: Marathon LeTourneau Super 300

CONSTRUCTION: Marathon LeTourneau, 1982. PERFORMANCE: Water depth–375′; Drilling depth–25,000′.

QUARTERS: 90 persons.

HULL: 270′ x 268′ x 28′.

VARIABLE LOAD: 4,133 t.

HELIPORT: Octagonal 83′

STORAGE: Mud & Cmt Bulk-i 3,600 cf; Liquid Mud–2,600 bbl; Fuel–6,060 bbl; Base oil-1,500 bbl; Water for Drilling–16,500 bbl; Potable Water–2,100 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 De; Pumps–Three Nat’l 14-P-220 triplex; Prime movers–Five Cat. 3516-B; Rotary Table-Nat’l C-495; Top Drive–Varco TDS 4H.

DERRICK: 160′; 1.300,000-lb hook load.

BOP SYSTEM: Two double 13%” 10,000 psi; One 13%” 5,000 psi annular.

CRANES: Three Marathon LeTourneau PCM 220SS, 50 ton.

REMARKS: 60′ cantilever reach.

WORK AREA: Trinidad

GLOMAR HIGH ISLAND I

DESIGN: Marathon LeTourneau 82-SD-C

CONSTRUCTION: Davie Shipbuilding, Canada, 1979.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 72 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 1,987 t.

HELIPORT: 65′ diameter.

STORAGE: Mud & Cmt Bulk–8,500 cf; Liquid Mud-1,490 bbl; Fuel–2,287 bbl; Water for Drilling–6,612 bbl; Potable Water–983 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160; Prime movers– four Cat. D-399; Rotary Table-Nat’l C-375; Top Drive–Varco TDS-3H.

DERRICK: 160′ x 30′; 1,000,000-lb static hook load.

BOP SYSTEM: Two double 13 4/8″, 10,000 psi wp; One 13 5/8″ 5,000 psi wp annular.

CRANES: Three LeToumeau, PCM-120 AS w/100′ boom, 50 short tons @ 24′.

REMARKS: Modified to accept 7′ cant, extensions.

WORK AREA: Gulf of Mexico.

GLOMAR HIGH ISLAND II

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada, 1979.

PERFORMANCE: Water depth–280′.

QUARTERS: 74 persons.

VARIABLE LOAD: 1,809 at.

OTHER DATA: Typical Glower High Island I.

WORK AREA: Gulf of Mexico.

GLOMAR HIGH ISLAND III

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada, 1980.

QUARTERS: 88 persons.

VARIABLE LOAD: 1,784 st.

STORAGE: Mud & Cmt Bulk–9,320 cf; Liquid Mud-1,415.

OTHER DATA: Typical Glomar High Island I.

WORK AREA: Gulf of Mexico.

GLOMAR HIGH ISLAND IV

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada 1980.

VARIABLE LOAD: 1,738 at.

STORAGE: LIquid Mud- 1,445 bbl.

DRILLING EQUIPMENT: Top Drive–National PS 500

REMARKS: Zero discharge.

OTHER DATA: Typical Glomar High Island I.

WORK AREA: Gulf of Mexico.

GLOMAR HIGH ISLAND V

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION Marathon LeTourneau Brownsville, Texas, 1981.

PERFORMANCE Water depth–280′.

QUARTERS: 79 persons.

VARIABLE LOAD: 1,665 st.

STORAGE: Liquid Mud- 1,415 bbl; Fuel–2,368 bbl; Water for Drilling–6,870 bbl: Potable Water– 120 bbl.

CRANES: Four LeTourneau PCM-120 AS w/ 100′ booms, 50 at @24.

REMARKS: 40′ cant, reach.

OTHER DATA: Typical Glomer High Island I.

WORK AREA: West Africa.

GLOMAR HIGH ISLAND VII

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada, 1982.

QUARTERS: 77 persons.

VARIABLE LOAD: 1,700 st.

OTHER DATA: Typical Glower High Island I.

WORK AREA: West Africa.

GLOMAR HIGH ISLAND VIII

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada 1982.

QUARTERS: 76 persons.

VARIABLE LOAD: 1,640 st.

DRILLING EQUIPMENT: Top Drive–Varco TDS-3H.

OTHER DATA: Typical Glomar High Island I.

WORK AREA: Gulf of Mexico.

GLOMAR HIGH ISLAND IX

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Davie Shipbuilding, Canada, 1983,

QUARTERS: 93 persons.

VARIABLE LOAD: 1,518 st.

DRILLING EQUIPMENT: Drawworks–Nat’l C-375 UE.

REMARKS: 40′ cant. reach.

OTHER DATA: Typical Glower High Island I.

WORK AREA: West Africa.

R-12 WORLD/DECEMBER 2001

GLOMAR LABRADOR I

DESIGN: CFEM T-2005-C

CONSTRUCTION: CFEM, Dunkerque, Franc, 1983.

PERFORMANCE: Water depth–300′; Drilling depth–25,000

QUARTERS: 90 persons.

HULL 265′ x 301′ x 246″.

VARIABLE LOAD: 2,263 t.

HEUPORT: 73′ die.

STORAGE: Mud & Cmt Bulk– 10,456 of; Liquid Mud-1,975 bbl; Fuel–3,25 bbl; Base oil- 1,200, bbl; Water for Drilling–4,450 bbl: Potable Water– 1,990 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–three Nat’l 12-P-160; Prim movers-five Cat 3516-B: Rotary Table-Nat’l C-495; Top Drive–Varco TDS-4S.

DERRICK: Joseph Paris; 160′; 1,300,000-lb static hook load

BOP SYSTEM: Two double 13 5/8″ 15.000 psi rams, one 13 5/8, 10,000 psi annular preventer.

CRANES Two Nat’l OS-215; 50 t

WORK AREA: Trinidad.

GLOMAR MAIN PASS I

DESIGN: Friede and Goldman L780 Mod 11

CONSTRUCTION: Ingalls Shipyard, Mississippl, 1982.

PERFORMANCE Water depth–300′ Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL: 180’x 175’x 25.

VARIABLE LOAD: 1,785 st.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk–8,685 cf; Liquid Mud–1,800 bbl; Fuel–2,470 bbl: Base oil- 1,800 bbl; Water for Drilling–3,392 bbl; Potable Water– 1,348 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps-two Nat’l 12-P- 160; Prime movers– five Cat D-399: Rotary Table-Nat’l C-375; Top Drive–Verco TDS-3.

DERRICK: 160′; 1,250,000-lb static hook load.

BOP SYSTEM: Two double 13 5/8″, 10,000 psi rams, one 13 5/8″, 5.000 psi annular preventer.

CRANES: Two Nat’l, OS-105 with 100′ booms, 40 st @ 25′; one Nat’l OS-215 with 120′ boom, 55 st @30′.

REMARKS: Unit equipped with 10′ cantilever extension; skid off capability.

WORK AREA: Gulf of Mexico.

GLOMAR MAIN PASS IV

DESIGN: Friede & Goldman L780 Mod II.

CONSTRUCTION: Ingalls Shipyard, Mississippi, 1982.

QUARTERS: 80 persons.

VARIABLE LOAD: 2,047 st.

DRILLING EQUIPMENT: Top Drive–Varco TDS 3H.

REMARKS: Skid off capability.

OTHER DATA: Typical Glomar Main Pass I.

WORK AREA: Gulf of Mexico.

The Great Eastern Shipping Co. Ltd. (GESCO)

KEDARNATH

DESIGN: Marathon LeTourneau Class 84

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1975,

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 78 persons.

HULL: LeTourmeau design; 248′ x 200′ x 26′.

VARIABLE LOAD: 1,800 t.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk–9,500 cf & 5,000 eke; Liquid Mud- 1,400 bbl; Water for Drilling– 8,500 bbl; Potable Water– 1,400 bbl.

DRILLING EQUIPMENT: Drawworks-Emsco C2, 2,000 hp; Pumps–Emsco FA-1,600 Triplex; Prime movers-five Cat. D-399.

DERRICK: 147′.

CRANES: Three LeTourneau PCM 120A5 electric motor driven cranes w/100′ boom rated 45 tons @ 25′ radius.

MOORING: Four 10,000-lb Lt anchors; four electric motor driven winches, at 50,000-lb pull each.

REMARKS: Formerly Atwood Oceanic’s Shenandoah.

WORK AREA: India.

Hitech Drilling Services India Ltd.

HITDRILL I

DESIGN: Baker Marine, 300 IC

CONSTRUCTION: : Promet Private Pte. Ltd., Singapore, 1983. Major upgrade Nov 1999.

PERFORMANCE: Water depth–300′; Drillin depth–21,000.’

QUARTERS: 96 persons.

HULL 212′ x 210′ x 26′.

VARIABLE LOAD: 2,475 t.

HELIPORT: Sikorsky S61.

STORAGE: Mud & Cmt Bulk–9,000 of; Liquid Mud–2,000 bbl; Fuel–5,600 bbl; Water for Drilling–4,577 bbl; Potable Water–1,830 bbl.

DRILLING EQUIPMENT: Drawworks-ldeco 2100E; Pumps–two ideco T1600, 1,600-hp each Prime movers–four Cat. 3516 B, 1,850 hp; Rotary Table–Ideco 37 1/2″. Top Drive–Canrig 1050 e-2SP, 1,130 hp, 500t.

DERRICK: Paris, 1,392,000 lb-GNC.

BOP SYSTEM: Cameron 13 5/8″, 10.000 psi, One double, one single.

CRANES: Two Baker Marine rated 25 st @ 20′.

WORK AREA: India.

Jagson International Ltd.

DEEP SEA MATDRILL

DESIGN: Baker Marine; 250 Mat type.

CONSTRUCTION: Built by Nippon Kokan K.K., Japan; 1981.

PERFORMANCE: Water depth–250′; Drilling depth -20,000′.

QUARTERS: 74 persons.

HULL: 191′ x 132′ x 16′.

VARIABLE LOAD: 1,975 short tons.

HELIPORT: 60′ x60′, Sikorsky S61.

STORAGE: Mud & Cmt Bulk-6,500 of; Liquid Mud- 1,600 bbl; Water for Drilling–4,000 bbl; Potable-773 bbl; Fuel–1000 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-2; Pumps–Emsco FB 1600; Prime movers–four Cat. D-399, 1,400 hp, one Cat. 3306; Generators-four Kato 600 VAC, 1,050 KW; Rotary Table– 37-1/2″; Top Drive–Maritime Hydraulics 500t.

DERRICK: 147′, Dreco 1,400,00-lb cap.

BOP SYSTEM: Annular 2 K, 21 1/2,” and 13 5/8″, 10 K CIW U with D/R and S/R 21 1/4″ 3K D/R CIW.

CRANES: Two BMC 900 hydraulic.

REMARKS: Formerly Sedco 253.

WORK AREA India,

Japan Drilling Co. Ltd.

SAGADRIL I

DESIGN: MHI; MDJ-300E

CONSTRUCTION: Mitsubishi Heavy Industries, Japan, 1984.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 99 persons.

HULL 1937″ x 1839″ x 21’7″.

VARIABLE LOAD: 2,700 mt.

STORAGE: Mud & Cmt Bulk–9,200 cf + 5,000 sks; Liquid Mud-2,209 bbl; Fuel–2,732 bbl Water for Drilling–4,321 bbl; Potable Water– 1,679 bbl.

DRILLING EQUIPMENT: Dreawworks–Nat’l 1320 UE; Pumps-two EMSCO FB, 1600 triplex; Prime movers–four Daihatsu 1,900 hp; Rotary Table–Emsco T 3750; Top Drive: Varco TDS-4H.

DERRICK 157′; 1,333 kipS GNC.

BOP SYSTEM: 21 1/4″ Hydril 2K ann.; two 21 1/4 CIW U 2K single ram; 13 5/8 Hydril 5K ann.; 13 5/8″ CIW U single/double 10K rams.

CRANES: Two Mitsubishi 66 kips @39′ w/115 boom.

MOORING: Four single dram winches, 1 1/2″, 2,130 anchor wires w/14,000 lb anchor

REMARKS: Operated by Segadrill; formerly Hakuryu 9.

WORK AREA: Middle East.

SAGADRILL 2

DESIGN: MDT 76 J-VII.

CONSTRUCTION: MHI, Hiroshima Shipyard, 1981.

PERFORMANCE: Water depth–300′; Drilling depth-20,000.’

QUARTERS: 96 persons.

HULL 1937″ x 1839″ x21’7″.

VARIABLE LOAD: 2.700 mt.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk-9,200 cf + 5,000 sks; Liquid Mud-2,283 bbl; Fuel-2,516 bbl A/star for Drilling–4,497 bbl; Potable Water– 1,679 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-two Nat’l 12-P-160; Prime movers– four Nilgata, 1,891 hp; Rotary Table–Emaco T- 3750; Top Drive–Varco TDS-4H.

DERRICK: Emsco/Mitsubishi 157′; 1,333 kips.

BOP SYSTEM: Two CIW single U 21 1/4″, 2,000 psi Shaffer 21 1/4″, 2,000 psi; Hydril GK 13 5/8″,5000 psi; CIW single/double U 13 5/8″, 10,000 psi.

CRANES: Two OBE electric, 66 kips @ 39′ radius w/112’3″ boom.

MOORING: Four 8,000 lb anchors.

REMARKS: Operated by Sagadrill.

WORK AREA: Middle East.

HAKURYU 8

DESIGN: MD-T-76J

CONSTRUCTION: Mitsubishi Heavy Industries, Hiroshima, Japan, 1981.

PERFORMANCE: Water depth–250′; Drilling depth-20,000′;

QUARTERS: 91 persons.

HULL: 193.6’x 183.x 2i.6′

VARIABLE LOAD: 2,150 mt.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–9,200 cf + 5,000 sks; Liquid Mud–2,266 bbl; Fuel-2,516 bbl; Water for Drilling–2,547 bbl; Potable Water– 1,679 bbl.

DRILLING EQUIPMENT: Drawworks–National 1320-UE; Pumps–two National 12-P- 160; Prime movers–four Niligate, 1,865 hp; Rotary Table–CE T-3750; Top Drive–Bowen-Varco power swivel.

DERRICK: CD 157′, 1,333 kips.

BOP SYSTEM: 21 1/4 Hydril 2K ann.; two 21 1/4″ CIW U 2K single; 13 5/8″ Hydril 5K ann.; two 13 5/8″ CIW U double 10K ram.

CRANES: Two Mitsubishi; 66 kips @ 39’radius w/110′ booms.

WORK AREA: Middle East

Maersk Contractors Drilling Division

MAERSK ENDEAVOUR

DESIGN: Gusto Engineering

CONSTRUCTION: RSV-Gusto Eng., B.V., Schiedam, Holland, 1982.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 77 persons.

HULL: 226′ x 259′ x 27′.

VARIABLE LOAD: 2,973 rat, plus 4 x 32 rat tensioning.

HELIPORT: 83′ diameter.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud-1,635 bbl; Fuel–2,106 bbl; Water for Drilling–5,045 bbl; Potable Water-1,440 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE; Pumps–three Nat’l 12-P-160 triplex; Primemovers–4 x 3516 B DITA; Rotary Table–Nat’l C-495; Pipe Handling System–Iron Roughneck; Top Drive–Varco TDS-4H.

DERRICK: 160′, 1,000,000 lb hook load capacity.

BOP SYSTEM: Regan diverter 500 psi; One 21 1/4″ spherical; Two Shaffer ram preventers, 2,000 psi; One Shaffer spherical 13 5/8″, 5,000 psi; Four Koorney ram units 13 5/8″, 15,000 psi.

CRANES: One Nat’l 50 ton; one Nat’l 38 ton; One Maritime Hydraulic 5 ton.

REMARKS: Controlled discharge.

WORK AREA: North Sea.

MAERSK ENDURER

DESIGN: Baker Marine Corp., 350 cantilever.

CONSTRUCTION: Nippon Kokan, 1984; converted 1997.

PERFORMANCE: Water depth-350′; Drilling depth–25,000′.

QUARTERS: 98 persons.

HULL: 236′ x 236′ x 30′.

VARIABLE LOAD: 3,250 t.

HELIPORT: 70′ dla.

STORAGE: Mud & Cmt Bulk–10,000 cf; Liquid Mud–3,568 bbl; Fuel–3,119 bbl; Water for Drilling–7,038 bb;; Potable Water–4,830 bbl; Brine-1,510 bbl.

DRILLING EQUIPMENT: Drawworks–Continental Emsco II, 3,000 hp; Pumps–three Continental Emsco FC 2,200 hp, 7,500 psi; Prime movers–four Wartslla 12V-200B; Rotary Table–Continental Emsco C/3 II 4950; Top Drive–Varco TDS-4S.

DERRICK: 1,500,000 lb hook load.

BOP SYSTEM: Shaffer 13 5/8″, 15,000 psi stack.

CRANES: Two Dreco 72 DNS 140′.

REMARKS: Formerly JFP Eleven.

WORK AREA: North Sea.

MAERSK ENHANCER

DESIGN: CFEM; Trigone 2005C

CONSTRUCTION: CFEM, Dunkerque, France, 1982.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 86 persons.

HULL: 245′ x 283′ x 24’6″.

VARIABLE LOAD: 2,995 t.

HELIPORT: 83′ dia.

STORAGE: Mud & Cmt Bul-11,000 cf; Liquid Mud-1,680 bbl; Fuel–2,378 bbl; Water for Drilling–4,578 bbl; Potable Water-1,990 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l. 1625 DE; Pumps–three 12P-160; Prime movers-three Wartslla 12V22 HD; Rotary Table-Nat’l C-375; Top Drive–Varco TDS-4H.

DERRICK: Joseph Paris; 160′; 1,000,000-lb.

BOP SYSTEM: Regan KFDJ 500 psi diverter; C/W 21 1/4″, 2,000 psi, CIW 13 5/8″, 10,000 psi.

CRANES: Two Nat’l OS215, 50 ton.

REMARKS: Formerly Trident X.

WORK AREA: North Sea.

MAERSK EXERTER

CONSTRUCTION: CFEM, Dunkerque, France, 1982.

OTHER DATA: Same as Enhancer, except: Top Drive–Varco TDS-3; Mud Pumps–2 x Nat’l 12-p-160; Mud/cmt cap-9,600 cf; Liquid Mud-1,680 bbl; Drawworks–Nat’l 1625-DE, 2,000 hp.

WORK AREA: North Sea.

MAERSK VALIANT

DESIGN: Mitsui Ocean Development & Engineering, 300 C-38

CONSTRUCTION: Mitsui Ocean Development & Engineering Co., Japan, 1981.

PERFORMANCE: Water depth–225′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 219′ x 190′ x 26′.

VARIABLE LOAD: 2,250 mt.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud–2,174 bbl; Water for Drilling–5,367 bbl; Potable Water–2,270 bbl.

DRILLING EQUIPMENT: Drawworks-Oilwell 2000E; Pumps–two Oilwell A1700 pt; Prime movers–four Cat. D399TA; Rotary Table–Oilwell A49 1/2″; Pipe Handling System–Iron Roughneck; Top Drive–Varco TDS-3.

DERRICK: Dreco 160′; 1,000,000-lb hook load capacity.

BOP SYSTEM: One Regan diverter 500 psi; one 20 3/4″. 3,000 psi; one dbl ram, 5,000 psi; One 13 1/3″ spherical 5,000 psi; One single/one double Shaffer ram units, 10,000 psi.

CRANES: One Nat’l OS-435HD; One OS-215,50 mt.

REMARKS: Zero discharge.

WORK AREA: Middle East.

MAERSK VIKING

DESIGN: Modec 300 C-38

CONSTRUCTION: Mitsui Ocean Development & Engineering Co., Japan, 1981.

PERFORMANCE: Water depth–300′.

OTHER DATA: Typical of Maersk Valiant, except: Quarters-82 persons; Prime movers–four Cat 3516 DITA; BOP-20 3/4″, but 21 1/2″ spher., 2,000 psi; one dbl ram, 2,000 psi.

WORK AREA: Qatar.

MAERSK GUARDIAN

DESIGN: Hitachi, Giant Class

CONSTRUCTION: Hitachi Zosen, Ariake, Japan, 1986.

PERFORMANCE: Water depth-350″; Drilling depth–25,000′.

QUARTERS: 90 persons.

HULL: 276′ x 295′ x 31′.

VARIABLE LOAD: 5,000 mt plus 4 x 50 mt tensioning.

HELIPORT: 83′ dia.

STORAGE: Mud & Cmt Bulk–13,500 bbl; Liquid Mud–2,500 bbl; Fuel–4,300 bbl; Water for Drilling-21,158 bbl; Potable Water–2,700 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320-UE; Pumps–three Nat’l 12-P-160 triplex; Primemovers–five Cat. 3516 DITA; Rotary Table-one Nat’l C-495; Pipe Handling System–Varco PRS 81; Top Drive–Varco TDS 4S.

DERRICK: 160′; 1,000,000-lb hook load.

BOP SYSTEM: One Regan diverter 500 psi; One 21 1/4″ spherical; two single Shaffer ram units 2,000 psi; One Shaffer spherical 13 1/2″, 5,000 psi; Four Koomey ram preventers 13 1/8″, 15,000 psi.

CRANES: One Nat’l OS-435; two Nat’l OS-215.

WORK AREA: North Sea.

MAERSK GIANT

DESIGN: Hitachi Giant class.

BOP SYSTEM: 10 K annular, 3 x 15 K Shaffer ram.

OTHER DATA: Typical of Maersk Guardian, Except Varco TDS 3S top drive.

MAERSK GALLANT

DESIGN: MSC-CJ62-5120

CONSTRUCTION: FELS, Singapore, 1993.

PERFORMANCE: Water depth–350′; Drilling depth 25,000′.

QUARTERS: 90 persons.

HULL: 257′ x 296′ x 36′.

VARIABLE LOAD: 5,000 t, incl. hook load.

HELIPORT: 80′ dia., 5-61.

STORAGE: Mud & Cmt Bulk-15,000 cf; 5,000 bbl; Brine-1,700 bbl; Fuel 4,240 bbl; Base oil-1,700 bbl; Water for Drilling–14,000 bbl; Potable 1,900.

DRILLING EQUIPMENT: Drawworks–Emsco C3-II, 3,000 hp; Pumps–Emsco FC 2200, three x 2,200 hp; Prime movers–five Cat. 3516 TA; Pipe Handling System–Varco PLS-1; Top Drive–Varco TDS-6S.

DERRICK: 160′, 1,650.000 lb hook load capacity.

BOP SYSTEM: One Vetco Gray diverter 500 psi, 18 3/4″ spher., 10K; one single/one double NXT 15K.

CRANES: Three Liebherr; (2) 50 t; (1) 34 t.

REMARKS: Suited for harsh environments. Special HP/NT features.

WORK AREA: North Sea

MAERSK NEWBUILDING XL.

DESIGN: MSC CJ70-150 MC.

CONSTRUCTION: Hyundai Heavy industries, Korea, 2002.

PERFORMANCE: Water depth–492′; Drilling depth–30,000′.

QUARTERS: 120 persons.

HULL: 291′ x 336′ x 38′.

VARIABLE LOAD: 10,000 t

HELIPORT: S-61N.

STORAGE: Mud & Cmt Bulk–15,891 cf; Liquid Mud–6,790 bbl; Fuel–11,080 bbl; Water for Drilling-21,140 bbl; Potable Drilling-3,430 bbl.

DRILLING EQUIPMENT: Drawworks–Varco AC, 4,000 hp; Pumps–Wirth AC, 3 x 2,200 hp, 7,500 psi; Prime movers-14,495 hp; Rotary Table–49 1/2″; Top Drive–TDS-85A, 65,000 ft lb.

DERRICK: 210′; 2,000,000 lb.

BOP SYSTEM: One 18 2/4″, 10K spher.; 2 x 18 3/4″ double 15K ram; combined subsea/surface BOP.

CRANES: One, 140′, 50t; two, 160′, 50t.

REMARKS: High cap. X-Y cantilever.

WORK AREA: North Sea.

MAERSK NEWDUILDING

DESIGN: MSC CJ70-150 MC

CONSTRUCTION: Hyundal Heavy industries, Korea, 2002.

OTHER DATA: Same as Maersk Newbuilding XL

WORK AREA: North Sea

Mike Mullen Energy Equipment Resources, Inc.

ODIN LIBERTY

DESIGN: Bethlehem JU-250MS

CONSTRUCTION: Bethlehem steel, Singapore, 1978.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 166′ x 132′ x 16′.

VARIABLE LOAD: 2,175 t.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–6,480 cff; Liqui Mud-1,650 bbl; Sack stg-3,000 sks; Fuel-1,800 bbl; Water for Drilling–4,950 bbl; Potable Water-895 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE, 2,000 hp; Pumps–two GD PZ-11 Triplex, 1,600 hp each; Prime movers–four Cat D-399 diesel electric generating sets; Rotary Table-Nat’l C-375; Top Drive–PS-500.

DERRICK: Pyramid 147′; 1,392,000 lb capacity.

BOP SYSTEM: 13 5/8″, 10,000 psi

CRANES: Two Nat’l OS-105 w/100′ boom, each rated 30 tons @ 35′.

MOORING: One Bow anchor winch.

REMARKS: Formerly D.K. McIntosh and Falrig 83.

WORK AREA: West Africa.

ODIN SPIRIT

DESIGN: Bethlehem J250 MS

CONSTRUCTION: Bethlehem Shipyard, Singapore, 1979

PERFORMANCE: Water depth–250 m; Drilling depth-20,000′.

QUARTERS: 93 persons.

HULL: 166′ x 132′ x 16′.

VARIABLE LOAD: 1,837 t.

HELIPORT: 60′ x 60′, S-61.

STORAGE: Mud & Cmt Bulk–170 cu m; Liquid Mud–238.2 cu m; Fuel-263.4 cu m; Water for Drilling–785.3 cu m; Potable Water–245.6 cu m.

DRILLING EQUIPMENT: Drawworks–Nat’l 132OUE; Pumps–two Nat’l 10-P-130; Primemovers–four Cat D399; Rotary Table-Nat’l C-375.

DERRICK: Pyramid i47′; 1,044,000 lb.

BOP SYSTEM: 10,000 psi, 13 5/8″ Schaffer.

CRANES: Two Nat’l OS-105.

REMARKS: Formerly Bohal VI.

WORK AREA: China.

Nabors Drilling International Inc.

NABORS 655

DESIGN: Self-elevating cantilever (38′) jackup.

CONSTRUCTION: Far East Levingston Shipbuilding, Singapore, 1980.

PERFORMANCE: Water depth-8’160′; Drilling depth-12,000′.

QUARTERS: 70 persons.

HULL: 154′ x 132′ x 15’9″.

STORAGE: Mud & Cmt Bulk–4,000 cf; Liquid Mud–953 bbl; Fuel–1,296 bbl; Water for Drilling-2,358 bbl; Potable Water-1,590 bbl.

DRILLING EQUIPMENT: Drawworks-OIME 1.000-E, 750 hp; Pumps–Two Gardner Denver PZ-28 triplex: Prime movers–Three Cat., D-399, w/1,050 kW A.C. gen; Rotary Table–27 1/2″.

DERRICK: Pool designed, 130′; 500-kip capacity.

CRANES: Two Baker Marine Series 900, 35 t w/ 100′ boom

REMARKS: Formerly Odin Star.

WORK AREA: Arabian Gulf.

NABORS 656

DESIGN: Marathon LeTourneau, Class 80, Special shallow draft

CONSTRUCTION: Marathon LeTourneau, Scotland, 1974.

PERFORMANCE: Water depth–250′; Drilling depth-25,000′.

QUARTERS: 118 persons.

HULL: 245′ x 204 x 18′ triangular.

VARIABLE LOAD: 3,885 kips plus 1,000 kips drilling load.

HELIPORT: 71′ dia.

STORAGE: Mad & Cmt Bulk–9,40D cf; Liquid Mud–2,340 bbl; Fuel–3,000 bbl; Water for Drilling–5,000 bbl; Potable Water-5,000 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–2 x oliwell A – 1700 PT: Prime movers–five Cat. D-399 diesels; Rotary Table– Oliwell 37 1/2″; Top Drive–Varco TDS-3.

DERRICK: Pyramid-160′; 1,000,000-lb hook load capacity.

BOP SYSTEM: 13 1/2″, 5,000 psi annular; 13 1/2″, 10,000 psi single/double ram.

CRANES: Three LeTournesa pcm 120; 45 t @ 25′; one American Hoist S-6D, 225 t.

REMARKS: Formerly Key Victoria.

WORK AREA: Arabian Gulf.

NABORS 867

CONSTRUCTION: Far East Levingston Shipbuilding, Singapore, 1982.

PERFORMANCE: Water depth–150′; Drilling depth–15,000′.

QUARTERS: 84 persons.

HULL: 154′ x 132 x 15’9″.

STORAGE: Mud & Cmt Bulk–4.520 cf; Liquid Mud-1,500 bbl; Fuel-1,729 bbl; Water for Diilling–3,036 bbl; Potable Water–2,506 bbl.

DRILLING EQUIPMENT: Drawworks–Ideco E1200; Pumps–two Gardner Denver PZ9; Prime movers–four Cat D-399 w/1,050 kW generators; Rotary Table-37 1/2″.

DERRICK: Pool designed. 139′; 850 kip capacity.

BOP SYSTEM: 11″, 5 K annular; 11″ 5K sgl./dbl ram.

CRANES: Two Eaker Marine Corp. 900, 35-ton w/l00′ boom

REMARKS: Formerly Pool Arabia Rig 145 and RIG 145.

WORK AREA: Arabian Gulf.

OCEAN MASTER VIII

DESIGN: Baker Marine BMC- 160.

CONSTRUCTION: Nobars SA., Brazil, 1983.

PERFORMANCE: Water depth–12′-160′; Drilling depth–18,000′.

QUARTERS: 88 persona.

HULL: 151′ x 156′ x 18′.

VARIABLE LOAD: 3,311 kips.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud-1,550 bbl; Water for Drilling–4,635 bbl; Potable Water–2,126 bbl.

DRILLING EQUIPMENT: Drawworks–Mid-Cont. U-1220-UE; Pumps–two FB 1800; Prime movers–live Cat. 3512 B; Rotary Table–Gardner Denver 37 1/2″; Top Drive–Canrig 105GB. 500 t.

DERRICK: Lee C. Meow. 147′. 1.000,000 lb hook load capacity.

BOP SYSTEM: 13 5/8″ 5K ann., 135/8″ 10K sgl/bdl rams.

CRANES: One Baker Marine 900, 25 t; one Nat’l OS-215,46 t.

MOORING: Four 5,000 kg anchors w/2,000′. 1 1/2″ wire rope.

WORK AREA: Arabian Gulf.

Nabors Offshore Services.

DOLPHIN 105

DESIGN: DT II

CONSTRUCTION: Gonzales Marine Enterprises, Port Bienville, Miss. 1982.

PERFORMANCE: Water depth–13′-100′; Workover/comp.-20,000; Drilling depth–N/A.

QUARTERS: 36 persons.

HULL: 92′ x 120′.

VARIABLE LOAD: 1,400 hips.

HELIPORT: Bell 212.

STORAGE: Mud & Cmt Bulk-1,600 sks; Liquid Mud–410 bbl; Fuel–1,000 bbl; Water for Drilling-1,000 bbl; Potable Water–710 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 610-E; Pumps–Ellis Williams W-440 Triplex; Prime movers–Four Cat D379TA thru IPS 1500 m; Rotary Table-Nat’l C-205.

DERRICK: DSI 136′; 600.000 lb static hook load.

BOP SYSTEM: Cameron type U. 11″, 10,000 psi.

CRANES: One Nat;l OS-45.

REMARKS: Formerly Dolphin Titans Rig 105.

OTHER DATA: Cantilever reach-30′: capable of skid-offs. Operated by Sundowner Offshore Services Inc., Nabors Industries. Inc.

WORK AREA: Gulf of Mexico

DOLPHIN 106

CONSTRUCTION: Gonzales Marine Enterprises, Port Bienville, Miss, 1982.

REMARKS: Formerly Dolphin Titans Rig 105.

OTHER DATA: Same as Dolphin 105. Operated by Sundowner Offshore Services Inc., Nabors industries. Inc.

WORK AREA: Gulf of Mexico.

DOLPHIN 110

DESIGN: N/A

CONSTRUCTION: General Dynamics & Service Machine, 1982.

PERFORMANCE: Water depth-11′-115′; Drilling depth–N/A; Workover depth 16.000′.

QUARTERS: 48 persons.

HULL: 130′ x 82′ x 14′.

VARIABLE LOAD: 3,000 kips.

HELIPORT: Bell 212 or Sikorsky S-76.

STORAGE: Mud & Cmt Bulk–4,200 cf; Liquid Mud–1,127 bbl; Fuel-1,385 bbl; Water for Drilling–4.100 bbl; Potable Water–995 bbl.

DRILLING EQUIPMENT: Drawworks–Mid Cont. U914EC: Pumps–two GD PZ10; Prime movers–three EMD 12-645E8 @1,600 hp; Rotary Table–Oliwell 37 1/2″.

DERRICK: Pyramid 146′; 1,392,000 lb.

BOP SYSTEM: CIW 11″, 10.000 psi GK annular and single/double type U, H2S trim.

CRANES: Two SeaKing 500 w/80′ booms.

REMARKS: Operated by Sundowner Offshore Services Inc., Nabors Industries, Inc. Formerly Nealwell I and Dolphin Titan’s Rig 110.

OTHER DATA: Zero discharge rating.

WORK AREA: Gulf of Mexico.

DOLPHIN 111

CONSTRUCTION: General Dynamics & Service Machine, 1982

PERFORMANCE: Water depth–11′-115′; Drilling depth–N/A; Workover depth-16,000′.

QUARTERS: 48 persons.

HULL: 82′ x 102′.

VARIABLE LOAD: 3.000,000 lb.

HELIPORT: 60′ dia.

STORAGE: Mud & Cmt Bulk–3,800 cf; Liquid Mad-1,200 bbl; Wafer for Drilling-3,532 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks–U-914; Pumps–Gardner Denver P Z10; Prime movers–three EMD 5,000 hp; Rotary Table-37 1/2″; Pipe Handling System–12,000′ 9 5/8″ csg., 20,000′ 4 1/2″ DP.

DERRICK: 1,300,000 lb gross load capacity.

BOP SYSTEM: 10,000 psi. 13 5/8″ Cameron stack.

CRANES: Two 30 t @30′ reach.

REMARKS: Formerly Bob Warner. Nealwell II.

WORK AREA. Brazil.

WORKHORSE IX

DESIGN: Independent leg cantilever workover

CONSTRUCTION: LeToumeau, 1957, Baker/1984.

PERFORMANCE: Water depth–125′; Drilling depth–12,000′.

QUARTERS: 35 persons

HULL: 152′ x 142′ x 18′.

VARIABLE LOAD: 1,500 kips.

HELIPORT: 56′.

STORAGE: Mud & Cmt Bulk–N/A; Liquid Mud–874 bbl; Fuel-1,278 bbl; Water for Drilling–2,222 bbl; Potable Water–717 bbl.

DRILLING EQUIPMENT: Drawworks–ldeco E-900; Pumps–(2) Oilwell A, 1,100-PT; Prime movers–(3) D-399 Cat SCR GB; Rotary Table–Oilwell 27 1/2″.

DERRICK: Lee 131′ triple scoping mast, 600 kips capacity.

BOP SYSTEM: 11″, 5,000 psi.

CRANES: (2) Baker 900. 100′ booms.

WORK AREA. Gulf of Mexico.

REMARKS: Remodeled for heavy duty workover at McDermott yard, 1989; formerly J.F.P. Nine.

POOL RIG 50

DESIGN: Mat supported, 4-leg jack-up barge, cantilever, propulsion assist

CONSTRUCTION: Baker Marine Corp., Corpus Christi, Rig system: Pool Co., San Angelo. Texas, 1977.

PERFORMANCE: Water depth–16′-90′; Drilling depth-10,000′.

QUARTERS: 36 persons.

HULL: 120′ x 100′ x 11′.

VARIABLE LOAD: 1,038 kips.

HELIPORT: 50 x 49 1/2″.

STORAGE: Mud & Cmt Bulk–4360 bbl & 140 kips; Fuel–338 bbl; Water for Drilling–508 bbl; Potable Water–483 bbl.

DRILLING EQUIPMENT: Drawworks–Pool 750 hp w/two 12V-71 diesels; Pumps–Howco HT 400: Prime movers–two 12V-71 diesels; Rotary Table–17 1/2.”

DERRICK: Pool, API; 130′; 500 kip capacity.

CRANES: two Pyramid 15-ton capacity; 60′ and 80′ booms

WORK AREA. Gulf of Mexico.

POOL RIG 53

CONSTRUCTION: Baker Marine Corp. 1981.

PERFORMANCE: Water depth-16′-90; Drilling depth–12,000′.

QUARTERS: 40 persons.

HULL: 130′ x 100′ x 11′.

VARIABLE LOAD: 1,297 kips.

HELIPORT: 43′ x 48′ less safety netting.

STORAGE: Mud & Cmt Bulk–2,460 cf; Liquid Mud–360 bbl; Fuel–343 bbl; Water for Drilling–772 bbl; Potable Water–412 bbl.

DRILLING EQUIPMENT: Drawworks–Pool 750 hp; Pumps–two Dowell 550 hp; Prime movers–two Gardner Denver PZ-8; Rotary Table–27 1/2″.

DERRICK: N/A.

CRANES: One 15 t w/80′ boom; one 151 w/60′ boom.

WORK AREA: Gulf of Mexico.

POOL RIG 54

DESIGN: Mat supported, 4-leg jack-up cantilever w/propulsion assist

CONSTRUCTION: Amardah, Durban South Africa, 1983.

PERFORMANCE: Water depth–16′-90′; Drilling depth–12,000′.

QUARTERS: 40 persons.

HULL: 130′ x 100′ x 11′.

VARIABLE LOAD: 1,382.8 kips.

HELIPORT: 43′ x 48′ less safety netting.

STORAGE: Mud & Cmt Bulk–2,400 of; Liquid Mud–500 bbl; Fuel–343 bbl; Water for Drilling–343 bbl; Potable Water–412 bbl.

DRILLING EQUIPMENT: Drawworks–ldeco 900E; Pumps–two Gardner Denver PZ-8; Prime movers–two EMD ME8EE8/775 kW generators; Rotary Table–27 1/2″.

DERRICK: Pool, API; 130′, 500 kip capacity.

CRANES: One Nautilus 4000, one Nautilus 7000.

WORK AREA: Gulf of Mexico.

POOL-RANGER V

DESIGN: Bethlehem Steel Corp., JU-70CW

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1981.

PERFORMANCE: Water depth–13-73′; Drilling depth–10,000′.

QUARTERS: 32 persons.

HULL: 115′ x 74′ x 8′.

STORAGE: Mud & Cmt Bulk–820 of; Liquid Mud–300 bbl; Water for Drilling–400 bbl; Potable Water–300 bbl.

DRILLING EQUIPMENT: Drawworks–GD 700800 hp; Pumps–two GD PZ 8 Triplex; Prime movers–Two Detroit Diesel 12V-149; Rotary Table–GD RT 27 1/2″.

DERRICK: Branham 131′; 327,000 lb hook load capacity.

BOP SYSTEM: One 11″ 5,000 psi Shatter spherical bag; Two 11″ 5,000 psi Shatter LWS rams; 10,000 psi C & K manifold.

CRANES: One SeaKing with 70′ boom.

REMARKS: Self-propelled mat-supported jack-up barge. Formerly Arapaho, formerly owned by Temple Marine Drilling Co. Previously Houtech I and Ranger V.

WORK AREA: U.S. Gulf Coast

POOL-RANGER VI

DESIGN: Bethlehem JU-70 MOW.

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1981.

PERFORMANCE: Water depth–13-90′

VARIABLE LOAD: 385,000 lb.

HELIPORT: 40′ x 40′.

STORAGE: Mud & Cmt Bulk–850 cf+1,000 sks; Liquid Mud–300 bbl; Fuel–192 bbl; Water for Drilling–400 bbl; Potable Water–300 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell 660, 1,000 hp; Pumps–two Gardner Denver PZ-8, 750 hp; Prime movers–two Cat. 3408; Rotary Table–Oilwell 27 1/2″.

BOP SYSTEM: 11″ Stack, one single, one double Cameron 10,000 psi.

CRANES: One SeaKing w/70′ boom.

REMARKS: Formerly Temple Marine’s Navajo. Previously Houtech II and Ranger VI.

WORK AREA: U.S. Gulf Coast.

POOL-RANGER VII

DESIGN: Bethlehem Steel Corp., JU-70CW

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1981; upgraded in 1998.

PERFORMANCE: Water depth–73′; Drilling depth–10,000′.

QUARTERS: 32 persons.

HULL: 400,000 lb.

VARIABLE LOAD: 115′ x 74′ x 8′.

HELIPORT: 40′ x 40.

STORAGE: Mud & Cmt Bulk-820 cf; Liquid Mud–300 bbl; Fuel–192 bbl; Water for Drilling- 400 bbl; Potable Water–300 bbl.

DRILLING EQUIPMENT: Drawworks–GD 700-800 hp; Pumps-two GD PZ 8 Triplex; Prime movers–two Detroit Diesels 12V-149; Rotary Table–GD 271/2″.

DERRICK: Branham 131′; 357,000 lb hook load capacity.

BOP SYSTEM: One 11″ 5,000 psi Shatter spherical bag; Three 10,000 psi Shatter LWS.

CRANES: One SeaKing with 70′ boom.

REMARKS: Formerly Houtech Ill, Rio Grande Uno, and Oceandrill Ranger

WORK AREA: U.S. Gulf Coast.

National Drilling Co. of Abu Dhabi

AL GHALLAN

DESIGN: Marathon LeTourneau; Class 82-S.

CONSTRUCTION: Marathon LeTourneau, Clydebank, Scotland, 1977.

PERFORMANCE: Water depth-135′; Drilling depth–20,000′.

QUARTERS: 78 persons.

HULL: 203′ x 164′ x 22′.

VARIABLE LOAD: 4,848 kips.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–6,500 cf; Liquid Mud–1,313 bbl; Fuel-3.950 bbl; Water to Drilling–5,380 bbl; Potable Water-1,280 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–Nat’l 12-P-160; Prime reovers-five Cat. D-339 w/930-kW gen; Rotary Table-Nat’l C-375; Top Drive-Tesco 500 t.

DERRICK: 147′; 1,392 kips GNC.

BOP SYSTEM: one 13 5/8″, 5K ann.; three 13%”. 5 K rams.

CRANES: Two LeTourneau PCM, 120 AS.

MOORING: Four 7,000-lb anchors.

WORK AREA: Arabian Gulf.

AL ITTIHAD

DESIGN: Marathon LeTourneau; Class 82-S.

CONSTRUCTION: Marathon Shipbuilding Co. (UK) Ltd., Clydebank, Scotland. 1975.

PERFORMANCE: Water depth-150′; Drilling depth-20,000′.

VARIABLE LOAD: 3,800 kips.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud-1,200 bbl; Fuel-3,925 bbl; Water for Drilling–4,350 bbl; Potable Water-850 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160; Prime movers-five Cat. D-399 w/two 1,900 kW and one 1,050 kW gen.; Rotary Table-Nat’l C-375.

CRANES: Three LeTourneau MPC, 120 AS.

REMARKS: Designed for the Arabian Gulf; joint venture of Arabian/Scottish interests.

OTHER DATA: Typical of Al Ghallan.

WORK AREA: Arabian Gulf.

AL YASAT

DESIGN: Hitachi cantilever type

CONSTRUCTION: Hitachi Zosen Shipbuilding & Engineering Co., Ltd., Ariake, Japan, 1979.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 80 persons.

HULL: 239′ x 201’x 21′.

VARIABLE LOAD: 6,300 kips.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–2,277 bbi; Fuel–3,586 bbl: Water for Drilling–5,556 bbl; Potable Water-2,248 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps-two Nat’l 12-P-160; Prime movers- five Cat. D-399; Rotary Table-Nat’l C-375; Top Drive-Nat’l Oilwell PS2 500/500.

DERRICK: 147′; 1.300,000-lb hook load.

BOP SYSTEM: 135/8″, 10,000 psi.

CRANES: Three LeTournesu POM. 120 AS.

WORK AREA: Arabian Gulf.

DIYINA

DESIGN: Hitachi cantilever type

CONSTRUCTION: Hitachi Zosen Shipbuilding, Ariake, 1979.

OTHER DATA: Typical of Al Yasat. Nat’l Power Swivel; Derrick-160′.

WORK AREA: Arabian Gulf.

JUNANA

DESIGN: Hitachi slot type

CONSTRUCTION: Hitachi Zosen Shipbuilding. Ariake, 1980.

HULL: 254′ x 200′ x 21′.

VARIABLE LOAD: 7,920 kips.

DERRICK: 160,1,392 kips.

BOP SYSTEM: 13 5/8″. 5,000 psi.

CRANES: Two LeTournesu MPC, 120 AS.

OTHER DATA: Typical of Al Yasat except with Top Drive, Varco TDS-4; Derrick-160′.

WORK AREA: Arabian Gulf.

YEMILAH

DESIGN: Hitachi cantilever type

CONSTRUCTION: Hitachi Zosen Shipbuilding, Ariake, 1982.

PERFORMANCE: Water depth-200′.

DERRICK: Pyramid 160′

BOP SYSTEM: 20″, 2,000 psi; 13 5/8″. 10.000 psi.

CRANES: Three Nat’l OS-105.

OTHER DATA: Typical of Al Yasat except with Top Drive, Varco TDS-3.

WORK AREA: Arabian Gulf.

BRAKAH

DESIGN: Baker Marine BMC-1601L, cantilever.

CONSTRUCTION: Nobara S.A., Brazil, 1983.

PERFORMANCE: Water depth-12′-150′; Drilling depth-18,000′.

QUARTERS: 88 persons.

HULL: 151′ x 156 x18′

VARIABLE LOAD: 3.035 kips.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–7,700 cf; Liquid Mud-1,468 bbl; Fuel-2,219 bbl; Water for Drilling-4,635 bbl; Potable Water-2.126 bbl.

DRILLING EQUIPMENT: Drawworks-Mid-Cont. U 914-60; Pumps-two PB 1600; Prime movers-four Cat D-399; Rotary Table-Emaco 37 1/2″.

DERRICK: Lee C. Moore, 147′. 1,000,000 lb hook load capacity.

BOP SYSTEM: 13 5/8″, 5,000 psi.

CRANES: Two Baker Marine 900.

REMARKS: Formerly Ocean Master VI.

WORK AREA: Arabian Gulf.

DELMA

DESIGN: Baker Marine BMC-1601L, cantilever.

CONSTRUCTION: Nobara SA. Brazil, 1963.

VARIABLE LOAD: 3,311 kips.

REMARKS: Formerly Ocean Master V.

OTHER DATA: Typical Brakah.

WORK AREA: Arabian Gulf.

BEYOUNA

DESIGN: Baker Marine BMC-1601L. cantilever.

CONSTRUCTION: Built by Norbars SA., Brazil; 1983

REMARKS: OTHER DATA: Typical Brakah.

OTHER DATA: Formerly Ocean Master VII.

WORK AREA: Arabian Gulf.

National Iranian Drilling Co. (NIDC)

AL BORZ

DESIGN: Letourneau 42

CONSTRUCTION: Marathon Letourneau. Vicksburg. Miss., 1968.

REMARKS: Formerly Momentum II and Penrod 58. For additional information see Rigzone. www.rigzone.com.

WORK AREA: Persian Gulf.

ALVAND

DESIGN: Bethlehem J-250 MS.

CONSTRUCTION: Bethlehem. Singapore. 1977.

REMARKS: Formerly Scan Bay. For additional information see Rigzone. www.rigzone.com.

WORK AREA: Persian Gulf.

SHAHID MODARRES

DESIGN: Bethlehem JU-250 MS

CDNSTRUCTION: Bethlehem Steel. Singapore, 1974.

PERFORMANCE: Water depth–195′; Drilling depth–20.000′

QUARTERS: 82 persons.

HULL: 197′ x 109′ x 16′.

VARIABLE LOAD: 3,250 kips.

HELIPORT: 70 x 76′.

STORAGE: Mud & Cmt Bulk–7,000 cf +3,000 sacks; Liquid Mud-1,488 bbl; Fuel–1,795 bbl; Water for Drilling-4,357 bbl; Potable Water- 893 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UB; Pumps-Nat’l 12-P-160; Prime movers-Five Cat D-399TA; Rotary Table-Nat’l C-375.

DERRICK: Lee C. Moore 147′. 1,000,000 lb.

BOP SYSTEM: Cameron Type U, 13 5/8″, 5,000 psi.

CRANES: One LeTourneau PCM-80-AS, one Nat’l OS-45.

REMARKS: Self-elevating mat/slot unit, hydraulic jacking system. Stacked.

WORK AREA: Persian Gulf.

SHAHID RAJAI

DESIGN: Modeck

CONSTRUCTION: Hitachi Zosen, 1984.

PERFORMANCE: Water depth–300′; Drilling depth-20,000′.

QUARTERS: 80 persons.

HULL:” 218′ x 200′ x 23′.

VARIABLE LOAD: 2.250 mt.

HELIPORT: Sikorsky S61 & MI-8.

STORAGE: Mud & Cmt Bulk–4,000 cf & 4,000 sks; Liquid Mud–2,176 bbl; Fuel–3,484 bbl; Water for Drilling–5,491 bbl; Potable Water- 2,567 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625 DE, 3,000 hp input; Pumps-Nat’l 12-P-160; Prime movers-Five Cat. D-399A; Rotary Table-C-375.

DERRICK: Nat’l 152′, 1,300.000 lb.

BOP SYSTEM: Cameron Type U, 13 5/8″. 5,000 psi.

CRANES: Two Nat’l OS-105 electric, one Nat’l OS-215 diesel.

REMARKS: Self-elevating cantilever unit.

WORK AREA: Persian Gulf.

IRAN KHAZAR

DESIGN: Friede & Goldman L-780 Mod. II. self elevating CL.

CONSTRUCTION: Rauma Repola and inn Mann Industrial Co. (SADRA), 1996

PERFORMANCE: Water depth-300′; Drilling depth-20,000′.

QUARTERS: 80 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 2,361 tons operating.

HELIPORT: 62 dia., S-61.

STORAGE: Mud & Cmt Bulk–264 cm; Liquid Mud–314 cm; Fuel–466.5 cm; Water for Drilling–877 cm; Potable Water–2,212 cm.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–Nat’l 12-P-160; Prime Mover-Five Cat 3516; Rotary Table–Nat’l Oilwell C-375.

DERRICK: 147′. 1,300.000 lb.

BOP SYSTEM: CIW 13 5/8″ 10K.

CRANES: Two unit W-SK 2150,100’s, 26/9 t.

WORK AREA: Persian Gulf.

Noble Drilling Corp.

NOBLE EDDIE PAUL

DESIGN: Marathon LeTourneau, Class 84 converted extended reach, cantilever.

CONSTRUCTION: Marathon LeTourneau, Vicksburg. Miss, 1975, conversion 1995.

PERFORMANCE: Water depth-390′; Drilling depth-25,000′.

QUARTERS: 74 persons.

HULL: 247′ x 200′ x 26′.

VARIABLE LOAD: 8,000 kip.

HELIPORT: 70.5′ diameter.

STORAGE: Mud & Cmt Bulk–6,300 cf; Liquid Mud-1,650 bbl; Fuel–5,200 bbl; Water for Drilling–6,300 bbl; Potable Water-1,290 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 CE; Pumps-Nat’l 12-P-160; Prime movers– three EMD 16-645-EB, 1,950 hp each; Rotary Table-Nat’l C-375, 37 1/2″; Cascaded mud system; Top Drive-Varco TDS-35.

DERRICK: Dreco 160′; 1,500,000 lb GNC.

BOP SYSTEM: One C/W 13 5/8″ U single; One C/W 13 5/8″ U double, 10,000 psi; one Hydril 13 5/8″, 5,000 psi annular: Diverter. 21 1/4″ MSP Hydril, 2,000 psi.

CRANES: Two 100′; one 120′.

REMARKS: Formerly Penrod 66 and Wasp.

WORK AREA: Gulf of Mexico.

NOBLE BILL JENNINGS

DESIGN: Marathon LeTourneau, Class 84 conversion extended reach cantilever.

CONSTRUCTION: Marathon LeTourneau. Clydebank, Scotland, 1975. Conversion 1997.

PERFORMANCE: Water depth–390′; Drilling depth–25,000′.

QUARTERS: 92 persons.

HULL: 247′ x 200′ x 26′.

VARIABLE LOAD 6 000 kips

HELIPORT: 70.5′ diamter

STORAGE: Mud & Cmt Bulk–8,740 cf; Liquid Mud–1,400 bbl; Fuel–5,289 bbl; Water for Drilling–6,300 bbl; Potable Water–1,250 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C3 Type II, 2,000 hp; Pumps–Three Emaco FA-1600 Triplex; Prime movers-three EMS 16-645E-8, 1,950 continuous hp each Cascaded mud system; Top Drive-CanRig 1165E.

DERRICK: 160′ x 30′ 1,300.000 lb GNC.

CRANES: Three Leourneau RD 120AS w/100′ booms; 45 tons @ 25′.

REMARKS: Formerly Penrod 65 and Nimitz.

WORK AREA: Gulf of Mexico

NOBLE LEONARD JONES

DESIGN: Marathod LeTourneau. Class 53 conversion extended reach cantilever

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1972. Conversion 1997

PERFORMANCE: Water depth–390′; Drilling depth–25,000′.

QUARTERS: 92 persons

HULL: 247′ x 200′ 26′.

VARIABLE LOAD: 7,500 kips.

HELIPORT: 70.5′ diameter

STORAGE: Mud Cmt Bulk–6,240 of; Liquid Mud–1,700 bbl; & Fuel–5,289 bbl; Water for Drilling–6,382 bbl; Potable Water-1,294 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625; Pumps-3 x Nat’l 12-P-160; Rotary Table-Nat’l C-375.

DERRICK: 160′ x30′, 1,300,000 lb GNC.

CRANES: Three LeTourneau; 45 tons @ 25′.

REMARKS: Formerly Penrod 62 and Coral Sea.

WORK AREA: Gulf of Mexico.

NOBLE ED HOLT

DESIGN: Levingston Shipbuilding Co., Class 111-C.

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas, 1981; Refurbished 1998.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 200′ x 196′ x 22’11”.

VARIABLE LOAD: 4,600 kips.

HELIPORT: 82′ x 69′.

STORAGE: Mud & Cmt Bulk–6,300 cf; Liquid Mud–1,420 bbl; Fuel–4,495 bbl; Water for Drilling–5,670 bbl; Potable Water–933 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000; Pumps–two Oilwell A-1700-PT; Prime movers–three EMD 16-cyl. diesels; Rotary Table–Oilwell 49 1/2″; Top Drive-Varco TDS-4SH.

DERRICK: Lee C. Moore, 160′; 1,600,000 lb GNC.

BOP SYSTEM: One CIW 13 5/8″ U single; one CIW 13 5/8″ U double, 10,000 psi; one Shaffer 13 5/8″ ann., 5,000 psi; Diverter 21 1/4″ Hydril MSP, 2,000 psi.

CRANES: Two FMC Link Belt ABS-218A w/ 100′ and 120′ booms.

WORK AREA: India.

NOBLE GENE ROSSER

DESIGN: Levingston, Class 111-C.

CONSTRUCTION: Levingston Shipbuliding Co., Orange, Texas, 1977, Cantilever conversion, 1996.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 208′ x 178′ x 22′.

VARIABLE LOAD: 6,000 kips.

HELIPORT: 70′ x 70′.

STORAGE: Mud & Cmt Bulk–6,000 cf & 1,760 sks; Liquid Mud-1,200 bbl; Fuel–4,000 bbl; Water for Drilling–5,400 bbl; Potable Water–900 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE, three GE 762 engines; Pumps–two Nat’l 12-P-160; Prime movers–two EMD 16EB,1400 kW & one EMD 8EB, 700 kW; Rotary Table-Nat’l C-375 Cascade Mud System; Top Drive-Nat’l PS-1.

DERRICK: 160′ x 30′; 1,392,000 lb GNC.

BOP SYSTEM: 13 5/8″ 10,000 psi.

CRANES: Three Nat’l OS 215 x 65 tons.

MOORING: One Nat’l winch, 50 hp AC motor.

REMARKS: Formerly Azteca.

WORK AREA: Bay of Campeche, Mexico.

NOBLE GUS ANDROES

DESIGN: Levingston 111 C.

CONSTRUCTION: Verolme Estalelros Reunidos do Brash SA., Rio de Janeiro, Brazil 1982. Refurbished in 1998.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL: 208′ x 178′ x 20′ 10″.

VARIABLE LOAD: 6,236 kips.

HELIPORT: 62′ x 66′.

STORAGE: Mud & Cmt Bulk–9,200 of; Liquid Mud-1,582 bbl; Fuel–2,790 bbl; Drill Water-7,880 bbl; Potable Water–2,337 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000; Pumps– two Oilwell 1700 PT; Prime movers–three EMD-MD 16E8; Rotary Table– Oilwell 37 1/2″; Top Drive–Varco TDS-3H.

DERRICK: Pyramid 160′; 1,400,000 lb hook load capacity.

BOP SYSTEM: One Shatter 13 5/8″ EL single; One Shaffer 13 5/8″ SL double, 10K; one Shatter 13 5/8″ spher., 5K; Shaffer 21 1/4″ spher., 2,000 psi.

CRANES: Two ABS 218 A FMC Link Belts with 100′ and 80′ booms; one LeTourneau PCM 120 with 103′ boom.

REMARKS: Formerly Norbe II, Excelsior I and Odin Explorer.

WORK AREA: Arabian Gulf.

NOBLE JOHN SANDIFER

DESIGN: Levingaton Class 111-C.

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas, 1975. Cantilever conversion 1995.

PERFORMANCE: Water depth–300′; Drilling depth–30,000′.

QUARTERS: 80 persons.

HULL: Triangular; 208′ x 178′ x 23′.

VARIABLE LOAD: 7,000 kips

HELIPORT: 62′ x 88′.

STORAGE: Mud & Cmt Bulk–3,150 cf & 3,150 cf; Liquid Mud–1,190 bbl; Fuel–4,133 bbl; Water for Drilling–5,532 bbl; Potable Water–904 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000; Pumps-Two Oilwell 1700 PT Triplex: Prime movers–two EMD 16, 1,950 hp, one EMD 8,97 5hp; Rotary Table–Oilwell A, 37 1/2″ Top Drive-Nat’l PS-2.

DERRICK: 160′;1,000,000 lb GNC

BOP SYSTEM: One double & one single Cameron 13 5/8″, 10.000-psi type U ram; Hydril CL 13 5/3″, 5,000-psi annular; Hydril 21 1/4″, 2,000-psi diverter.

CRANES: Three Link Belt ABS-218 w/90′ booms.

REMARKS: ADS Al, non self-propelled, self elevating rig. Formerly Diamond M Gem, Loosbrock Comet and Gulfstar.

WORK AREA: Bay of Campeche.

NOBLE LEWIS DUGGER

DESIGN: Levingston, Class 111-C.

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas, 1976. Cantilever conversion, 1996.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 81 persons.

HULL: 208′ x 178′ x 22′.

VARIABLE LOAD: 6,000 kips.

HELIPORT: 66′ x 62′.

STORAGE: Mud & Cmt Bulk–6,000 of; Liquid Mud-1,060 bbl; Fuel–4,000 bbl; Water for Drilling–5,400 bbl; Potable Water–360 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE, three GE-752 engines 3 x 900 hp; Pumps–two Nat’l 12-P-160; Prime movers–two EMD MD 16E8, one EMD 8 EB; Rotary Table-Nat’l C-375 Cascade Mud solids control; Top Drive-Nat’l PS-1.

DERRICK: 160′ x 30′, 1,000,000 lb GNC

BOP SYSTEM: CIW 13 5/8″, 10.000 psi.

CRANES: Two Nat’l OS 215, 65 tons.

REMARKS: Formerly Maya Dan. Formerly owned by PROTEXA, Maya.

WORK AREA: Bay of Campeche.

NOBLE SAM NOBLE

DESIGN: Levingston 111-C

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas, 1982.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL: 208′ x 186′ x 23′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 66′ x 62′.

STORAGE: Mud & Cmt Bulk–6,780 cf; Liquid Mud-1,020 bbl; Fuel–4,495 bbl; Water for Drilling–5,670 bbl; Potable Water–819 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000; Pumps–Two Oilwell A1700 PT; Prime movers–Three EMD 16-645-E8, 1,950 hp ea.; Rotary Table–Oilwell 49 1/2″; Top Drive–Varco TDS-3.

DERRICK: Lee C. Moore 147′ x 30′; 1,250.000 lb GNC.

BOP SYSTEM: 21 1/4″ Shatter spher.; 13 5/8″ stack; one Hydril G K 5,000 psi ann.; one Cameron U, 10.000 psi single; one Cameron U, 10.000 psi dbl.

CRANES: Two FMC Link Belt ABS-218A w/ 100′ booms.

WORK AREA: Gulf of Mexico.

NOBLE BYRON WELLIVER

DESIGN: CFEM T-2005C

CONSTRUCTION: CFEM, Dunkerque, France, 1982.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 78 persons.

HULL: 245′ x 283 x 24’7″.

VARIABLE LOAD: 2,600 mt.

HELIPORT: 82′ dia.

STORAGE: Mud & Cmt Bulk–12,355 cf; Liquid Mud-1,925 bbl; Fuel–2,378 bbl; Water for Drilling–4,572 bbl; Potable Water–2,000 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–three Nat’l 12-P-160; Prime movers–Four Cat 2300 hp; Rotary Table-Nat’l C-375; Pipe Handling System-Maritime Hydraulics Iron Roughneck; Top Drive-Varco TDS-4S.

DERRICK: J. Paris 160′, 1,000,000 lb.

BOP SYSTEM: CIW 13 5/8″, 10K; CIW 21 1/4″. 2 K; Regan diverters.

CRANES: Nat’l OS-215, Y5TS.

REMARKS: Formerly KCA Sandpiper, West Kappa, Neddrill 10 and STC Platen.

WORK AREA: North Sea.

NOBLE AL WHITE

DESIGN: CFEM T-2005 C

CONSTRUCTION: C.F.E.M., Dunkerque, France, 1982; refurbished 1997.

PERFORMANCE: Water depth–360′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 245′ x 283 x 247″.

VARIABLE LOAD: 2,900 mt.

HELIPORT: 82′ dia.

STORAGE: Mud & Cmt Bulk–12,355 of; Liquid Mud-1,925 bbl; Fuel–2,375 bbl; Water for Drilling–4,500 bbl; Potable Water-1,985 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE 2,000 hp; Pumps–three Nat’l 12-P-160 1,600 hp; Prime movers–four Cat 2.300 hp; Rotary Table-Nat’l C-375 37 1/2″; Pipe Handling System– Maritime Hydraulics vertical pipe handling block and Iron Roughneck. Top Drive:-MH DDM

DERRICK: Joseph Paris 147′; 1,000,000-lb hook load.

BOP SYSTEM: Cameron 13 5/8″, 15,000 psi; Cameron 20 1/4″ x 3,000 psi wp; Regan diverter.

CRANES: Two Nat’l OS 215, 45 t.

MOORING: Brissoneau and Lotz; two 2,300′ x 2 1/4″ wire w/9-t Vicinay anchors.

REMARKS: Formerly Neddrill Trigon.

WORK AREA: North Sea.

NOBLE GEORGE MCLEOD

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: Far East Levingston, Singspore, 1981. Refurbished 1995.

PERFORMANCE: Water depth-300′; Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,200 kips.

HELIPORT: 73′ dia,, S-61.

STORAGE: Mud & Cmt Bulk–8,720 cf+5,000 sks; Liquid Muud–1,826 bbi; Fuel–2,310 bbl Water for Drilling–6,374 bbl; Potable Water- 1,156 bbl.

DRILLING EQUIPMENT: Drawworks-Cont. Emsco C-3 Type II; Pumps–Two Cont. Emsco FB-1600 triplex; Prime movers–Four GM EMD 12-645-EB, 16,600 hp; Rotary Table–Cont. Emsco T-37 1/2″; Top Drive–Varco TDS-ESH.

DERRICK: Cont. Emsco 160′ x 30′; 1,400,000 lb GNC.

BOP SYSTEM: One CIW 13 5/8 10 K U single; one CIW 13 5/8 10 K dbl.; one Shaffer 13 5/8″ 5 K spher.; Shaffer 21 1/4′ diverter.

CRANES: Two FMC Link Belt ABS-238A w/ 120′ boom; one FMC Link Belt ABS-218A w/ 100′ boom.

REMARKS: Formerly Western Apollo II.

WORK AREA: Middle East.

NOBLE KENNETH DELANEY

DESIGN: Friede & Goldman L-780, Mod II

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss, 1983; refurbished 1998.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 82 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,200 kips.

HELIPORT: 73′ dia. rated for Sikorsky S-61.

STORAGE: Mud & Cmt Bulk–8,685 cf; Liquid Mud-1,800 bbl; Fuel–2,398 bbl; Water for Drilling–5,198 bbl; Potable Water-1,348 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE; Pumps–Two Nat’l 12-P-160 triplex; Prime movers–five D-399 Cat, 1,175 ea.; Rotary Table-Nat’l B 37 1/2″; Top Drive–Varco TDS-3H.

DERRICK: Lee C. Moore 160′, 2,000,000-lb GNC.

BOP SYSTEM: One CIW 13 5/8″, 10,000 U single, one CIW 13 5/8″ U double; one Shatter 13 5/8″ 5,000 spherical; Hydril 21 1/4″ MSP 2,000 diverter.

CRANES: One FMC Link Belt API-218A 100′ boom; two FMC Link Belt API-218A, 100′ boom.

REMARKS: Formerly Miss Kitty and Bonito 1.

WORK AREA: Middle East.

NOBLE PERCY JOHNS

DESIGN: Friede & Goldman, Ltd.; L-780 Mod II

CONSTRUCTION: Far East Levingston-Singapore, 1981.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 90 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,788 kips.

HELIPORT: 73′ dia., S-61.

STORAGE: Mud & Cmt Bulk–7,726 cf+5,000 sks; Liquid Mud-1,934 bbl; Fuel–2,810 bbl; Water for Drilling–6,374 bbl; Potable Water– 1,156 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C3; Pumps–two FB-1600 Emsco; Prime movers– three EMD 16-645E8; Rotary Table-Emsco T3750; Top Drive–Varco TDS-4S.

DERRICK: 160′ x 30′; 1,050,000 lb GNC.

BOP SYSTEM: Two CIW U dbl 13 5/8″ 10 K; one Shaffer spher. 13 5/8′, 5 K; One Shaffer MSP 21 1/4″.

CRANES: One FMC Link Belt ABS-238A w/120′ boom; one FMC Link Belt ABS-218A w/100′ boom; one Letourneau PCM, 100′.

REMARKS: Formerly Western Apollo I. Cant. extends to 52′.

WORK AREA: West Africa.

NOBLE TOMMY CRAIGHEAD

DESIGN: Friede & Goldman L-780-Mod II; independent leg cantilever

CONSTRUCTION: Ingalls Shipbuilding. Pascagoula, Mlss, 1982.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 88 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 62′, S-61.

STORAGE: Mud & Cmt Bulk-8,100 cf; Liquid Mud-1,500 bbl; Fuel-2,400 bbl: Water for Drilling-5,200 bbl; Potable Water-1,400 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625 DE 3,000 hp; Pumps-two Nat’l 12-P-160, 1,600 hp ea; Prime movers-three EMD 16 cyl. 645E8; Rotary Table–Nat’l C-375 37 1/2″; Top Drive–Varco TDS-4S.

DERRICK: 160′ x 30′; 1,300,000 lb GNC.

BOP SYSTEM: Two dbl. CIW U, 10 K 13 3/8″; one HYdril spher. 13 5/8″ 5 K: Regan KFDS.

CRANES: Three LeTourneau PCM-120-AS 50 ton @ 25′.

REMARKS: Formerly Yucatan. Cantilever sub-base, 1,400,000-lb rated cantilever load: extends to 49.

WORK AREA: West Africa.

NOBLE ROY BUTLER

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: China Shipbuilding, Taiwan, 1982; refurbished 1998.

PERFORMANCE: Water depth-250′; Drilling depth-25,000′.

QUARTERS: 100 persona.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,876 kips.

HELIPORT: Sikorsky S61.

STORAGE: Mud & Cmt Bulk-8,000 cf+5,000 sks; Liquid Mud-2,000 bbl; Water for Drilling-6,315 bbl; Potable Water-1,171 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C3 Type II; Pumps–Emsco FB 1600; Prime movers–three EMD 12-645-E; Rotary Table–Emaco T3750; Top Drive–BJ 200.

DERRICK: Cont. Emaco 157′ x 30′; 1,000,000 lb.

BOP SYSTEM: 13 5/8″ Shaffer ann., 5,000 psi; 13 5/8″ Cameron U, 10,000 psi single/dbl; Hydril MSP 29 1/2″, 500 psi diverter; 21 1/4″ Shatter 2K.

CRANES: Two Link Belt ABS 238A w/120′ boom (50 t @ 30); ABS 218 w/100′ boom (55 t @ 55′).

REMARKS: Formerly Western Apollo IV.

WORK AREA: West Africa.

NOBLE JIMMY PUCKETT

DESIGN: Friede and Goldman L780 Mod II

CONSTRUCTION: Ingalls Shipyard, Mississippi, 1982; refurbished 1999.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 84 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,200 kips

HELIPORT: 73′ dia., S-61.

STORAGE: Mud & Cmt Bulk-8,690 cf; Liquid Mud-1,800 bbl; Fuel-2,470 bbl; Water for Drilling-5,200 bbl; Potable Water-1,34B bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE; Pumps–two Nat’l 12-P-160; Prime movers–five Cat D-399; Rotary Table-Nat’l C-375; Top Drive–Varco TDS4-SH.

DERRICK: 170′; 1,600,000-lb static hook load.

BOP SYSTEM: One CIW 13 5/8″, 10 K U dbl, one C/W 13 5/8″, 10 K U single; One 13 5/8″, 5,000 psi annular preventer; 21 1/4″, 2,000 psi annular with diverter.

CRANES: Two Nat’l, OS-105, 100′; one Nat’l. OS 215 120′.

REMARKS: Formerly Global Marine’s Glomar Main Pass II, and Easar Explorer.

WORK AREA: Bombay High, India.

NOBLE KOLSKAYA

DESIGN: Gusto Engr. B.V

CONSTRUCTION: Rauma Repola, Finland, 1985.

PERFORMANCE: Water depth-327′; Drilling depth-25,000′.

QUARTERS: 84 persons.

HULL 69,25 m x 80 m.

VARIABLE LOAD: 2,650-3,250 mt.

HELIPORT: Octagonal 25.3 m x 25.2 m.

STORAGE: Mud & Cmt Bulk-520 mt; Liquid Mud-291 cu m; Fuel-646 cu m; Water for Drilling-737 cu m; Potable Water-160 cu m.

DRILLING EQUIPMENT: Drawworks-Oilwell E-3000; Pumps–three Oilwell A-1700; Prime movers–four Wartsila 8R-22, one 12V-200; Rotary Table-Oilwell 49 1/2″; Pipe Handling System–Rauma Repola-B; Top Drive–MH DDM-650.

DERRICK: 147′; 1,330,000 lb hook load.

BOP SYSTEM: Cameron 13 5/8″, 10,000 psi & 21 1/4″, 3,000 psl; Reagan diverter.

CRANES: Two Liebherr BOS 20/50, 35 t and 50 t.

REMARKS: Formerly USSR’s Kolskaja. Formerly in accommodation mode.

WORK AREA: North Sea.

NOBLE CARL NORBERG

DESIGN: Marathon LeTourneau; 82-C

CONSTRUCTION: Marathon LeTourneau, Singapore, 1976. Refurbished 1996; upgrade 1998.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 84 persons.

HULL: 203′ x 168′ x 22′.

VARIABLE LOAD: 2.671 kips.

HELIPORT: Sikorsky S61.

STORAGE: Mud & Cmt Bulk-5,400 cf & 3,000 sks; Liquid Mud-1,467 bbl; Fuel-2.835 bbl; Water for Drilling-6.104 bbl; Potable Water-995 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE. 2,000 hp; Pumps–two Nat’l 12-P-160; Prime movers–two EMD 16-645-E8, one EMD 12-645-E8, Ross Hill SCR; Top Drive-Varco TDS-3.

DERRICK: Pyramid 160′ x 30′; 1,000,000 lb GNC.

CRANES: Three LeTourneau RD-120,100′.

REMARKS: Formerly Western Triton l.

WORK AREA: Gulf of Mexico.

NOBLE CHUCK SYRING

DESIGN: Marathon LeTournesu; 82-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1976. Refurbished 1996.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 90 persons.

HULL: 203′ x 168′ x 22′.

VARIABLE LOAD: 4,000 kips.

HELIPORT: 61′, Bell 212 or 412.

STORAGE: Mud & Cmt Bulk-6,650 cf; Liquid Mud-2,262 bbl; Fuel-2,835 bbl; Water for Drilling-6,106 bbl; Potable Water-1,568 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps-two Nat’l 12-P-160; Prime movers–one EMD 12-645-E8, two EMD 16-645-E8; Rotary Table-Nat’l 37 1/2″; Top Drive–Varco TDS-5H.

DERRICK: Pyramid 160′ x 30′; 1,392,000 lb GNC.

BOP SYSTEM: CIW 13 5/8″ U, 10K single/double; Shatter 13 5/8″ ann., 5K; Hydril MSP, 2K diverter.

CRANES: Two LeTourneau PCM-120-AS w/ 103′ booms.

REMARKS: Formerly Western Oceanics’ Western Triton II and Qatar General Petroleum Corp.’s Dana.

WORK AREA: State of Qatar. Arabian Gulf.

NOBLE CHARLES COPELAND

DESIGN: Marathon LeTournesu 82-SD-C.

CONSTRUCTION: Marathon LeTorneau. Vicks-burg, Miss., 1979. Refurbished 2001.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 84 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 2,935 kips.

HELIPORT: 65′ dia., Bell 212 or 412

STORAGE: Mud & Cmt Bulk-7,600 cf & 3,000 sks; Liquid Mud-1,294 bbl; Fuel-2,119 bbl; Water for Drilling-6,500 bbl; Potable Water-928 bbl.

DRILLING EQUIPMENT: Drawworks-Emaco C2, 1,600 hp; Pumps-three Emsco FB 1600; Prime movers-three EMD 16-645-E8; Rotary Table-Emsco T3750, 37 1/2″; Top Drive-Varco TDS-45.

DERRICK: Cont. Emsco 160′ x 30′, 1,000,000 lb GNC.

BOP SYSTEM: One CIW 13 5/8″ U 10 K sgl; one CIW 13 5/8″ U 10K dbl; Hydril 13 5/8″ ann 5 K; Hydril MSP 21 1/4″ 2 K diverter.

CRANES: Three LeTourneau PCM 120-AS, two w/ 100′ booms, one w/ 120′ boom.

REMARKS: Formerly Western Triton IV. Shallow draft capability.

WORK AREA: Arabian Gulf.

NOBLE EARL FREDERICKSON

DESIGN: Marathon LeTourneau; 82-SD-C

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1979.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 83 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 2,935 kips.

HELIPORT: Sikorsky S-61.

STORAGE: Mud & Cmt Bulk-7,660 cf & 3,000 sks; Liquid Mud-1,617 bbl; Fuel-2,019 bbl; Water for Drilling-6,600 bbl; Potable Water-928 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320-UE, 1,600 hp; Pumps-two Nat’l 12-P-160; Prime movers–three EMD 16-645-E8; Rotary Table-Nat’l C-375. 37 1/2″; Top Drive-Can Rig 1165E.

DERRICK: Skytop Brewster 160′; 1,000.000 lb.

BOP SYSTEM: Cameron single and double 13 5/8″ 10,000 psi WP; Shatter 13 5/8″, 5,000 psi WP; Hydril Spherical 21 1/4″ 2,000 psi WP.

CRANES: Three LeTourneau PCM-i20 AS, two w/ 120′ booms, one w/100′ boom.

REMARKS: Formerly Western Triton II. Shallow draft capability; zero discharge.

WORK AREA: Gulf of Mexico.

NOBLE ED NOBLE

DESIGN: Marathon LeTourneau 82-SD-C.

CONSTRUCTION: Marathon Le Tourneau, Brownsville, Texas, 1984.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 84 persona.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 65′, S-61.

STORAGE: Mud & Cmt Bulk-7,700 cf; Liquid Mud-1,368 bbl; Fuel-2.059 bbl; Water for Drilling-6,531 bbl; Potable Water-1,900 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320-UE, 2,000 hp; Pumps-two Nat’l 12-P-160; Prime movers-three EMD, 12-645-E9B; Rotary Table-Nat’l C-375, 37 1/2″; Top Drive-Varco IDS-1.

DERRICK: Cont Emaco 147′, 1,050,000 lb GNC.

BOP SYSTEM: Hydril “GL” 13 5/8″, 5,000 psi ann.; Cameron U 13%”, 10,000 psi single/dbl.

CRANES: Three LeTourneau PCM 120-AS, two 100′ booms, one 120′ boom.

REMARKS: Formerly Penrod 98 and Midway. Shallow draft capability.

WORK AREA: West Africa.

NOBLE LLOYD NOBLE

DESIGN: Marathon LeTourneau 82-SD-C. independent leg cantilever

CONSTRUCTION: Marathon LeTourneau, Vicks-burg, Miss., 1983.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 88 persons.

HULL: 207′ x 178′ x 20′.

VARIABLE LOAD: 3,500 kips.

HELIPORT: 72′, S-61.

STORAGE: Mud & Cmt Bulk-7,700 cf; Liquid Mud-1,618 bbl; Fuel-2,118 bbl; Water for Drilling-5,885 bbl; Potable Water-1,729 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 320 UE; Pumps-two Nat’l 12-P-160 Triplex; Prime movers-Three EMD MD12E8, 1,650 hp; Rotary Table–Nat’l C-375; Cascaded mud system; Top Drive-Varco TDS-3.

DERRICK: Superior 160′ x 30′; 1,000,000 lb.

BOP SYSTEM: One double, one single Cameron 13 5/8″, 10,000-psi type U ram; Hydril GL 13 5/8″. 5,000-psi annular; Hydril 21 1/4′, 2,000-psi Cameron diverter.

CRANES: Two LeTourneau PCM 120 AS w/ 100′ booms; one LeTourneau PCM 120 AS, 120′.

REMARKS: Formerly Penrod 91 and Hornet. Shallow draft capability.

WORK AREA: West Africa.

NOBLE TOM JOBE

DESIGN: Marathon LeTourneau, 82-SD-C

CONSTRUCTION: Marathon LeTourneau. Brownsville, Texas, 1982.

PERFORMANCE: Water depth-250′; Drilling depth-25,000′.

QUARTERS: 80 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 65′ diameter, polygon.

STORAGE: Mud & Cmt Bulk-8,100 cf; Liquid Mud-1,200 bbl; Fuel-2,400 bbl; Water for Drilling-7.000 bbl; Potable Water-1,700 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625-DE 2,000 hp; Pumps–two Nat’l 12-P- 160,1600 hp ea; Prime movers-three EMD 16 cyl. MD16E8, 2,200 hp ea; Rotary Table-Nat’l C-375, 37 1/2″; Cascaded mud system; Top Drive-Varco TDS-3S.

DERRICK: Dreco 160′; 1,300,000 lb GNC.

BOP SYSTEM: Cameron U 13 5/8″ 10,000 psi ram; Shatter 13 5/8″ 10,000 psi annular; Hydril MSP 21 1/4″, 2,000 psi diverter; Hydril GL 5K 13 5/8.

CRANES: Three, (2) 100′. (1) 120′.

REMARKS: Modified for “zero” pollution discharge. Formerly Sioux, Johnnie Hoffman and Seabee. Shallow draft capability.

WORK AREA: Gulf of Mexico.

NOBLE RONALD HOOPE

DESIGN: MSC/CJ 46

CONSTRUCTION: CNIM, La Seine sur Mer, France, 1982.

PERFORMANCE: Water depth-220′; North Sea conditions; Drilling depth-25,000′.

QUARTERS: 80 parsons.

HULL: 182′ x 203′ x 24’6″.

VARIABLE LOAD: 2.376 mt.

HELIPORT: 82′ dia.

STORAGE: Mad & Cmt Bulk-12.355 cf; Liquid Mud-1,562 bbl; Fuel-3,868 bbl; Water for Drilling-5,258 bbl; Potable Water-1,535 bbl; Base oil-516 bbl; Brine-500 bbl.

DRILLING EQUIPMENT: Drawworks-Emsco C3 2,000 hp; Pumps-three Emaco FB 1,600 Triplex; Prime movers-one SACM, 1,650 hp four Cat, 3516 TA, 1,650 hp; Rotary Table-Emaco 49 1/2″; Pipe Handling System-Varco Iron Roughneck; Top Drive–Varco TDS-4H.

DERRICK: UIE 147, 1,000,000 lb hook load.

BOP SYSTEM: Cameron 13 5/2″, 10,000-psi wp; Cameron 20 3/4″ x 3,000 psi; Regan diverter.

CRANES: Two Sanders 55 ton, 120′ and 140′.

REMARKS: Formerly Neddrill 3.

OTHER DATA: Cantilever deck capacity 570 mt, reach 40.

WORK AREA: North Sea.

NOBLE GEORGE SAUVAGEAU

DESIGN: NAM Nediloyd

CONSTRUCTION: Hitachi-Zosen, Japan, 1981.

PERFORMANCE: Water depth-250′; Drilling depth–25,000′.

QUARTERS: 79 persons.

HULL: 197′ x 223′ x 26’3″.

VARIABLE LOAD: 3,000-4,380 mt.

HELIPORT: 73′ dia.

STORAGE: Mud & Cmt Bulk-11,190 cf; Liquid Mud–2,025 bbl; Fuel–3,165 bbl; Water for Drilling–2,555 bbl; Potable Water-1,205 bbl.

DRILLING EQUIPMENT: Drawworks–Ernsco C-3, 2,000 hp; Pumps-three Ernsco FB 1,600 Triplex; Prime movers–six Cat. D 399 TA, 1,215 hp; Rotary Table–Ernsco T 3750; Pipe Handling System–Varco Iron Roughneck; Top Drive-Varco TDS-3.

DERRICK: Ernsco 147′, 1,000,000-lb hook load.

BOP SYSTEM: Cameron 13 1/2″, 10,000-psi wp; Cameron 20 3/4″ x 3,000-psi wp.

CRANES: Two Sanders 2 x 44 t; 1 x 27.5 t.

MOORING: Four anchor winches w/3,280″ x 2″ wire & 7.5 t; Flipper Delta anchors.

REMARKS: Formerly Neddrill 4.

WORK AREA: North Sea.

NOBLE PIET VAN EDE

DESIGN: MSC, CJ46

CONSTRUCTION: CNIM, France, 1982.

PERFORMANCE: Water depth-220′, North Sea conditions; Drilling depth-25,000′.

QUARTERS: 80 persons.

HULL: 182′ x 203′ x 25′.

VARIABLE LOAD: 2,250-3,500 mt.

STORAGE: Mud & Cmt Bulk–12,355 cf; Liquid Mud–1,850 bbl; Fuel-3,600 bbl; Water for Drilling–5,200 bbl; Potable Water-1,100 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1600; Prime movers–one SACM 1,700 hp., four Cat. 3516 TA. 1,600 hp; Pumps–three Natl 12-P-160; Rotary Table-Nat’l 49 1/2″; Pipe Handling System–Varco Iron Roughneck; Top Drive-Varco TDS-4H.

DERRICK: 147′; 1,000,000-lb hook load.

BOP SYSTEM: Cameron 21 1/4″, 2,000 psi; 13 1/4″ 10,000 psi; Regan diverter.

CRANES: Two Bucyrus, 55 t, 140′ booms.

REMARKS: Formerly Neddrill 7 and Dyvi Epsilon.

OTHER DATA: Cantilever deck capacity 570-900 mt, cant, reach, 60′.

WORK AREA: North Sea.

NOBLE LYNDA BOSSLER

DESIGN: MSC/CJ 46

CONSTRUCTION: CNIM, La Seine sur Mer, France, 1982.

PERFORMANCE: Water depth-220′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 182′ x 203 x 24’6″.

VARIABLE LOAD: 2,554 mt.

HELIPORT: 82′ dia.

STORAGE: Mud & Cmt Bulk–7,062 cf; Liquid Mud-2,215 bbl; Fuel–3,868 bbl; Water for Drilling–5,258 bbl; Potable Water-1,100 bbl.

DRILLING EQUIPMENT: Drawworks–1,600 hp; Pumps–three Nat’l 12-P-160; Prime movers–four Cat 3516 TA, 1,600 hp; Rotary Table-Nat’l 49.5″; Pipe Handling System-Maritime Hydraulics Iron Roughneck; Top Drive–Varco TDS 46.

DERRICK: 147′, 1,000,000 lb.

BOP SYSTEM: Cameron 13 5/8″, 10,000-psi; CIW 21 1/4″, 2,000 psi, Regan diverters.

CRANES: Bucyrus Erie MK100, 56t.

REMARKS: Formerly Dyvi Sigma, West Sigma and Neddrill 9.

WORK AREA: North Sea.

NOBLE JOHNNIE HOFFMAN

DESIGN: Baker Marine Corp., BMC-300-IC.

CONSTRUCTION: Baker Marine, Ingleside, Texas, 1976, Modified 1988. Refurbished 1993.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 68 persons.

HULL: 234′ x 210′ x 26′.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 70′ dia. circular.

STORAGE: Mud & Cmt Bulk–7,680 cf & 5,000 sks; Liquid Mud-1,600 bbl; Fuel–5,023 bbl; Water for Drilling–7,043 bbl; Potable Water–906 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000 w/disc brakes; Pumps–Oilwell A-1700 PT; Prime movers–three GM EMD 12-645; Rotary Table–Oilwell A-37 1/2″; Top Drive–Varco TDS 3.

DERRICK: Lee C. Moore 160′ x 30′; 1,500,000 lb GNC.

BOP SYSTEM: 21 1/4″ Hydril MSP-2000; 13 3/4″ w/one Hydril GL 5,000-psi WP, one Cameron U single, one Cameron U double ram, 10,000-psi.

CRANES: Two FMC Link Belt ABS-218.

REMARKS: Zero discharge; formerly Transworld 64.

OTHER DATA: 52′ cantilever.

WORK AREA: Gulf of Mexico

NOBLE DICK FAVOR

DESIGN: Baker Marine; BMC 150-IC

CONSTRUCTION: Baker Marine Corp., Ingelside, Texas, 1982. Refurbished 1993.

PERFORMANCE: Water depth–150′; Drilling depth–25,000′.

QUARTERS: 54 persons.

HULL: 174′ x 162′ x 18′.

VARIABLE LOAD: 4,033 kips.

HELIPORT: Hexagonal 60′ across flats.

STORAGE: Mud & Cmt Bulk–5,340 cf; Liquid Mud–1,285 bbl; Water for Drilling–3,382 bbl; Potable Water-1,242 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160; Prime movers– three EMD 8-645E1 and two Cat D399; Rotary Table-Nat’l 37 1/2″.

DERRICK: Dreco 147′ x 30′; 1,000,000 lb GNC.

BOP SYSTEM: Cameron U 13 1/8″, 10,000 psi single/dbl; Shaffer 13 3/4″, 5,000 psi ann.; Hydril MSP 21 1/4″ 2,000 psi diverter.

CRANES: Two BMC w/100′ booms.

REMARKS: Formerly Ponca.

WORK AREA: Venezuela.

NOBLE DON WALKER

DESIGN: Baker Marine Corp., BMC-150-IC

CONSTRUCTION: Armadah, S. Africa, 1982.

PERFORMANCE: Water depth–8′-150′; Drilling depth–20,000′.

QUARTERS: 94 persons.

HULL: 189′ x 198 x 18′.

VARIABLE LOAD: 4,372 klps.

HELIPORT: Sikorsky S-61.

STORAGE: Mud & Cmt Bulk–6,000 cf+3,000 aks; Liquid Mud-1,322 bbl; Fuel–1,651 bbl; Water for Drilling–3,373 bbl; Potable Water–1,186 bbl.

DRILLING EQUIPMENT: Drawworks–Ernsco C2 Type II; Pumps–Ernsco FB-1300; Prime movers–three EMD 12-645-EB; Rotary Table–Ernsco T3750; Top Drive–Varco TDS-4S.

DERRICK: Cont. Ernsco 160′ x 30′, 1,000,000 lb.

BOP SYSTEM: Shaffer 13 5/8″ spherical w/three Cameron 13 5/8″ “U” rams 10,000 psi.

CRANES: Two Baker Marine Corp 900, 25 t, plus one LeTourneau pcm 120.

REMARKS: Formerly Western Nike I. Shallow draft capability.

WORK AREA: West Africa.

NOBLE JULIE ROBERTSON

DESIGN: Baker Marine Corp

CONSTRUCTION: Promet Ltd., Singapore, 1981.

PERFORMANCE: Water depth–210′; Drilling depth–25,000′

QUARTERS: 102 persons.

HULL: 230′ x 212′ x 27′.

VARIABLE LOAD: 8,200 kips.

HELIPORT: 83′ octagonal.

STORAGE: Mud & Crnt Bulk–12,000 cf; Liquid Mud-1,800 bbl; Fuel–3,500 bbl; Water for Drilling–8,300 bbl; Potable Water-1,600 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–two Nat’l 12-P-160; Prime movers– five Cat. D-399; Rotary Table–Nat’l 49 1/2″; Top Drive–Varco TDS-4S.

DERRICK: 160′; 1,600,000-lb hook load capacity.

BOP SYSTEM: Two stacks, 21 1/4″, 5,000-psi, 13 1/2″, 15,000-psi.

CRANES: One Nat’l OS-l05, 40 t @25′; one Nat’l OS-45, 80 t @ 30′.

REMARKS: Formerly Arethusa Scotian.

WORK AREA: Canada/North Sea.

Noble Crosco Drilling Ltd.

PANON

DESIGN: Levingston III-C.

CONSTRUCTION: Rhine-Schelde-Verolma, Rotterdam, Holland, 1977, upgraded 2001.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 100 persons.

HULL: 207.58′ x 177.88′ x 22.22′.

VARIABLE LOAD: 1,700 mt.

HELIPORT: Accommodates S-61, Bell 412.

STORAGE: Mud & Cmt Bulk–7,750 cf; Liquid Mud-1,789 bbl; Fuel–4,176 bbl; Water for Drilling–5,562 bbl; Potable Water-906 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l. 1320 UE, 1,600 hp; Pumps–two Nat’l. 12-P-160, 1,600 hp; Prime movers–five Cat D-399, one Cat. 3508; Rotary Table-Nat’l. 37 1/2″; Top Drive–Varco TDS 3-S.

DERRICK: 147′; 900,000 lb hook load,

BOP SYSTEM: Hydril 29 1/2″ diverter; 21 1/2″ 2 K annular; Shaffer 21 1/4″ 2K dbl; Hydril 13 5/8″ 10K annular; Shaffer 13 5/8″, 10K dbl.; 13 5/8″, 10K single.

CRANES: Two Nat’l. OS-125, 140′ 33 t.

REMARKS: Zero discharge, Formerly CROSCO Panon.

WORK AREA: Adriatic.

Oil & Natural Gas Corp. Ltd.

SAGAR KIRAN

DESIGN: Baker Marine Corp., IC 30D (M) class

CONSTRUCTION: Mazagaon Dock Ltd., Bombay, 1987.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 93 persons.

HULL: 212′ x 210′ x 26′.

VARIABLE LOAD: 3,765 t.

HELIPORT: 84′ diameter.

STORAGE: Mud & Cmt Bulk–4,840 of ea; Liquid Mud-1,800 bbl; Fuel–3,982 bbl; Water for Drilling–3,007 bbl; Potable Water-1,830 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–Oilwell A–1700 PT; Prime movers–Cat. D-399; Rotary Table–Oilwell B 37 1/2″.

DERRICK: 147′; 1,392,000-lb hook load.

BOP SYSTEM: 13 5/8″ Cameron, 5,000 psi.

CRANES: Two BMC 1000 series.

WORK AREA: India.

SAGAR UDAY

CONSTRUCTION: Mazagaon Dook Ltd., Bombay, 1990.

OTHER DATA: Same as Sagar Kiran.

WORK AREA: India.

SAGAR GAURAV

DESIGN: Robin Shipyard, Robco 300 cantilever design

CONSTRUCTION: Robin Shipyards, Singapore, 1983.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 81 persons.

HULL: 221′ x 220′ x 27′.

VARIABLE LOAD: 2,813 t.

HELIPORT: 80′ diameter.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–1,641 bbl; Water for Drilling–6,101 bbl; Potable Water-1,908 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160; Prime movers–Cat. D-399; Rotary Table-Nat’l C-375; Top Drive–TDS-9SA.

DERRICK: Pyramid; 1,392,000 lb.

BOP SYSTEM: 20″ x 2,000 psi; 13 5/8″ a 10,000 psi.

CRANES: Three Nat’l OS-105.

MOORING: BLM-4 NOJ w/l 1/2″ wire, 650 m.

WORK AREA: India.

SAGAR SHAKTI

CONSTRUCTION: Robin Shipyards, Singapore, 1983.

OTHER DATA: Same as Sagar Gaurav.

WORK AREA: India.

SAGAR JYOTI

DESIGN: Hitachi Zosen, cantilever

CONSTRUCTION: Hitachi Zosen, Japan, 1983.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 84 persons.

HULL: 66 m x 61 m x 7 m.

VARIABLE LOAD: 2,250 mt.

HELIPORT: 82′ diameter.

STORAGE: Mud &Crnt Bulk–272 cu m; Liquid Mud–300 cu m; Water for Drilling–780 cu m; Potable Water-160 cu m.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160; Prime movers–Cat. D-399-TA-5NB; Rotary Table-C-375; Top Drive– MH 500.

DERRICK: DSI 147′; 1,392,000 lb.

BOP SYSTEM: 20″ x 2,000 psi; 13 5/8″ x 10,000 psi.

CRANES: Three Nat’l OS-1-05.

MOORING: Four 40 mm wire, 650 m.

WORK AREA: India.

SAGAR RATNA

CONSTRUCTION: Hitachi Zosen, 1985.

PERFORMANCE: Water depth–16′-90′; Drilling depth–12,000′.

QUARTERS: 92 persons.

HULL: 130′ x 100′ x 11′.

VARIABLE LOAD: 1,297 kips.

HELIPORT: 43′ x 48′ less safety netting.

STORAGE: Mud & Cmt Bulk–272 cu m; Liquid Mud–346 cu m; Fuel–528 cu m; Mud & Cmt Bulk–2,460 cf; Liquid Mud–36D bbl; Fuel–343 bbl; Water for Drilling–772 bbl; Potable Water–412 bbl.

DRILLING EQUIPMENT: Drawworks–Pool 750 hp; Pumps–two Dowell 550 hp; Prime movers–two Gardner Denver PZ-8; Rotary Table–27 1/2″

DERRICK: N/A.

CRANES: One 15 t w/8D’ boom; one 15 t, 60′.

WORK AREA: India.

SAGAR PRAGATI

DESIGN: CFEM

CONSTRUCTION: CFEM, France, 1981.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 80 persons.

HULL: 84 m x 73 m x 7 m.

VARIABLE LOAD: 2,060 mt.

HELIPORT: MI-8.

STORAGE: Mud & Cmt Bulk–272 Cu m; Liquid Mud–240 cu m Fuel–366 cu m; Water for Drilling–600 cu m; Potable Water–130 cu m.

DRILLING EQUIPMENT: Drawworks–Nat’l 1,320 UE, 2,000 hp; Pumps–two Nat’l 12-P-l60 Triplex; Prime movers–five Cat. D-399-TA; Rotary Table- C-375.

DERRICK: Pyramld 147′; 1,392,000-lb API.

BOP SYSTEM: One Hydril 20″, 2,000-psi annular; One Hydril 13 5/8″, 5,000-psi annular.

CRANES: Two Nat’l OS-105 pedestal

MOORING: Four BLM W/1 1/2 wire, 650 m.

WORK AREA: India.

SAGAR SAMRAT

DESIGN: Offshore, Houston, four leg.

CONSTRUCTION: Mitsubishl Heavy Industries, Ltd., Japan, 1973.

PERFORMANCE: Water depth–250′; Drilling depth–18,000′.

QUARTERS: 72 persons.

HULL: 276′ x 130′ x 22′.

VARIABLE LOAD: 2,400 at.

HELIPORT: 84′ diameter.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud–244 cm; Fuel–3,000 bbl; Water for Drilling–764 cm; Potable Water–142 cm

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE, 2,000 hp; Pumps-Nat’l N-1600; Prime movers–four Alco 9,000 hp; Rotary Table-Nat’l C-375.

DERRICK: 140′; Lee C. Moore.

BOP SYSTEM: 20″ 2K annular; 13 5/8″ 5K annular; 13 5/8 5K single, 10K double.

WORK AREA: India.

Parker USA Drilling Co.

PARKER 11

DESIGN: Bethlehem JU 200

CONSTRUCTION: Bethlehem Steel Corp. 1981.

PERFORMANCE: Water depth–200′; Drilling depth–18,000′ (workover).

QUARTERS: 46 persons, 3-man sick bay.

HULL: 132′ x 157′ x 18′.

VARIABLE LOAD: 4,500 klps.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–2,700 bbl; Liquid Mud-1,500 bbl; Fuel–2,068 bbl; Water for Drilling–5,992 bbl; Potable Water–1,063 bbl; Completion Fluid-1,500 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 500S; Pumps-two Nat’l 12-P-160. one Gardner Denver PAH; Prime movers–4 EMD 16567; Rotary Table–Hacker Pyramid; Pipe Handling System–Foster 5893.

DERRICK: Superior Derrick Services, 132′, 500 kip, dynamic.

BOP SYSTEM: Double Cameron U, 11″ 10K; Shaffer annular; single Cameron U, 11″ 10K.

CRANES: One Link Belt 138, one Baker Marine BMC 900.

REMARKS: Cantilever capable of 54′, 38′ transverse. Formerly Marine 11, Cliffs Drilling 11 and Hercules 11.

WORK AREA: Gulf of Mexico.

PARKER 14

DESIGN: Baker Marine Corp., Big Foot Class

CONSTRUCTION: Jardine Offshore Promet Pte., Ltd., 1979.

PERFORMANCE: Water depth–8′-85′; Drilling depth–20,000′.

QUARTERS: 43 persons.

HULL: 130′ x 100′.

VARIABLE LOAD: 3,000.000 lb.

HELIPORT: 35′ x 55′.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud-1,300 bbl; Fuel-2,000 bbl; Water for Drilling–3,800 bbl; Potable Water–968 bbl.

DRILLING EQUIPMENT: Drawworks–Gardner-Denver 2100 E, double drum; Pumps–two Gardner-Denver PZ-11; Prime movers-four GM 1491TI 1,000 kW sets; Rotary Table-Garner-Denver RT 37 1/2″; Top Drive–Varco.

DERRICK: Branham, 147′ universal, 1,300,000-lb.

SOP SYSTEM: Shaffer 13 5/8″, 10,000 psi.

CRANES: Two Baker 900 w/80′ booms.

REMARKS: Formerly NR Big Foot and Hercules 14.

WORK AREA: Gulf of Mexico.

PARKER 15

DESIGN: Baker Marine Corp. Big Foot III

CONSTRUCTION: Baker Marine. 1982.

PERFORMANCE: Water depth-8-100′; Drilling depth–20,000′.

QUARTERS: 100 persons.

HULL: 155′ x 110′.

VARIABLE LOAD: 3,000 kips.

HELIPORT: 50′ x 50′.

STORAGE: Mud & Cmt Bulk–6,600 cf; Liquid Mud–1,300 bbl; Fuel-1,924 bbl; Water for Drilling–5,668 bbl; Potable Water–1,118 bbl.

DRILLING EQUIPMENT: Drawworks–Dreco 2,000 E; Pumps-Two Gardner Denver PZ-11; Prime movers–Three EMD 12-645 E9B; Rotary Table–Gardner Denver RT 37 1/2″.

DERRICK: 147′; 1,300,000-lb hook load.

BOP SYSTEM: NL Shaffer. 13 5/8″, 10,000 psi.

CRANES: Two BMC 900,80′ and 100′ booms.

REMARKS: Formerly Robert M. Womack and Hercules Rig 15.

WORK AREA: Gulf of Mexico.

PARKER 20

DESIGN: Bethlehem JU-100MC

CONSTRUCTION: Bethlehem Steel, Beaumont, Texas, 1980

PERFORMANCE: Water depth-12′-110′; Drilling depth–25,000′.

QUARTERS: 48 persons.

HULL: 143′ x 100′ x 13.5′.

VARIABLE LOAD: 1,750 t.

HELIPORT: 55′ x 55′, Bell 412.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud-1,140 bbl; Fuel–1,200 bbl; Water for Drilling–4,600 bbl; Potable Wafer–500 bbl.

DRILLING EQUIPMENT: Drawworks–Oliwell E3000; Pumps-two Oilwell Al700-PT Triplex; Prime movers–2 EMD MD 16E8, one MD 1208; Rotary Table–Oilwell 37 1/2″ electric; Top Drive–Varco TDS-1.

BOP SYSTEM: Shaffer 13 5/8″, 10 K.

CRANES: One Belt ABS 108, one American Aerro 450.

REMARKS: Formerly Broughton I and Hercules 20.

WORK AREA: Gulf of Mexico.

PARKER 21

DESIGN: Pacific Coast Engineering, Mat supported cantilever

CONSTRUCTION: Pacific Coast Engineering. Refurbished by PCE and Baker Marine Inc., Ingleside, Texas; 1980.

PERFORMANCE: Water depth–120′: Drilling depth–20,000′.

QUARTERS: 54 persons.

HULL: 190′ x 1226″ x 17.

VARIABLE LOAD: 3,000 kips.

HELIPORT: 50 x 50′.

STORAGE: Mud & Cmt Bulk–8.175 cf; Liquid Mud–2,000 bbl; Fuel–2,000 bbl; Water for Drilling–3,100 bbl; Potable Water–800 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell 2000; Pumps–three Oilwell 1400; Prime movers–four Cat. D-399 TAC; Rotary Table– Oilwell 37 1/2″; Top Drive–Varco TDS-1.

DERRICK: 147′; 1,400,000 GNC.

BOP SYSTEM: Cameron type U, 13 5/8″, 10,000 pal: One single, one double: 13 5/8″ 5,000 pal Hydril annular; 30″ 1,000 pal Regan annular.

CRANES: Two BMC 900 w/100′ boom.

REMARKS: Formerly JFP Five and Hercules 21.

WORK AREA: Gulf of Mexico.

PARKER 22

DESIGN: Marathon LeTourneau; Claaa 51 C

CONSTRUCTION: Marathon LeTourneau, 1971, Major modification 1981.

PERFORMANCE: Water depth–173′; Drilling depth–15,000′.

QUARTERS: 50 persons.

HULL: 133′ x 129′ x 15′

VARIABLE LOAD: 2,545 kipa+650 kipa substructure load.

HELIPORT: Bell 205 or Sikoraky S-62.

STORAGE: Mud & Cmt Bulk–4,000 cf & 1,500 sks; Liquid Mud–907 bbl; Fuel –900 bbl; Water for Drilling–3,379 bbl; Potable Water–666 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 110-UE. 1,600 hp; Pumps–two Emaco FB-1300 Triplex; Prime movers–two Cat. D-398TA; one D-399TA.

DERRICK: Lee C. Moore 137′, 600,000-lb nominal hook load capacity.

CRANES: Two LeTourneau; one 50 t @24′; one 25 @ 20′.

REMARKS: Formerly Western Delta, Delta and Hercules 22.

OTHER DATA:

PARKER 25

DESIGN: Marathon LeTourneau, 150-44 C(M)

CONSTRUCTION: Marathon LeTourneau Brownaville, Texas, 1980.

PERFORMANCE: Water depth–12-200′; Drilling depth–25,000′.

QUARTERS: 45 persons.

HULL: 153.5′ x 160′ x 16′.

VARIABLE LOAD: 3,136,000 lb.

HELIPORT: 50′ dia, polygon.

STORAGE: Mud & Cmt Bulk–8,100 of; Liquid Mud–1,100 bbl; Fuel-1,700 bbl; Water for Drilling–4,600 bbl; Potable Water–1,000 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE, 2,000 hp; Pumps–two Nat’l 10-P-130, 1,300 hp ea; Prime movers–three GM 16 Cyl. 16E149 TI, 1600 hp ea; Rotary Tabie-Nat’l C-375 371/2 Top Drive–Varco IDS-1.

DERRICK: 147′; 1,000,000-lb capacity.

BOP SYSTEM: Two Cameron 13 5/8″ 10,000 psi WP double ram preventers; Shatter 13 5/8″ 5,000 psi WP annular; Shatter 21 1/4″ 2,000 psi.

CRANES: Two LeToumeau PCM-120-AS 50 ton @ 25.

REMARKS: Formerly Gulfwind and Hercules 25.

OTHER DATA: Cantilever sub-base. Equipped for oil-base mud. Sub-base can be skidded onto a platform. Zero Discharge.

WORK AREA: Gulf of Mexico.

Perforadora Central, S.A. de C.V.

GRIJALVA

DESIGN: Bethlehem JU-200MC

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1980.

PERFORMANCE: Water depth–200′; Drilling depth-25,000′.

QUARTERS 72 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500.000 lb.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–6,000 cf+3,000 sks; Liquid Mud–1,500 bbl; Fuel –2,184 bbl; Water for Drilling–5,992 bbl; Potable Water–1,063 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160 Triplex; Prime movers–Detroit Diesels 16V-149T1; Rotary Table–Nat’l C-375; Top Drive–PS 350/500 Power Swivel National.

DERRICK: 147:1,400,000 lb.

BOP SYSTEM: One single, one double Cameron 13 5/8 ” 10,000 psi ram; One Shaffer 13 5/8″ 5K annular.

CRANES: One ABS-218A Link Belt, 75 ton; One ABS-138B Link Belt, 34 ton.

REMARKS: Formerly Sabine II

OTHER DATA: Cantilever capability to max. 45′.

WORK AREA: Gulf of Mexico, Mexico.

USUMACINTA

DESIGN: Bethlehem JU-200MC

CONSTRUCTION: Bethlehem Steel Corp., Singapore, 1982.

PERFORMANCE: Water depth–200′; Drilling Depth–25,000′

QUARTERS: 60 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500.000 lb.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–6,000 cf+3,000 ka; Liquid Mud–1,500 bbl: Fuel–2,184 bbl; Water for Drilling–5,992 bbl; Potable Water–1,060 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps-Nat’l 12-P-160 Triplex; Prin movers–Detroit Diesels 16V149 TI; Rotary Table–Nat’l C-375; Top Drive–PS 350/500 Power Swivel National.

DERRICK: 160′; 1,400,000 lb.

BOP SYSTEM: One single. one double Cameron 13 5/8″ 10,000 pal ram; One Shaffer 13 5/8″ 5,000 annular.

CRANES: One ABS-218 Link Belt. 75 ton; Or ABS-138B Link Belt, 43 ton.

REMARKS: Formerly Sabine V.

OTHER DATA: Cantilever capability to maximum 45′.

WORK AREA: Gulf of Mexico, Mexico.

Perforaciones Maritimas Mexicanas (PROTEXA)

NAHUATL

DESIGN: Marathon LeTourneau Class 82-SD-C

CONSTRUCTION: Marathon LeTourneau, 1971

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 86 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 1,800 t.

HELIPORT: 65′ dia.

STORAGE: Mud & Cmt. Bulk–6,339 cf; Liquid Mud-1,308 bbl; Fuel–2,287 bbl; Water for Drilling–6,694 bbl; Potable Water–996 bbl.

DRILLING EQUIPMENT: Drawworks–Mid Continent U-1200 BE 1,600 hp; Pumps–Two Gardner Denver PZ-11 triplex (SA); Prime movers–Four Cat. D-399; Rotary Table–37 1/2″ Oilwell; Top Drive–Varco TDS-11S, 500t.

DERRICK: Dreco 147′; 1,100,000-lb hook load.

BOP SYSTEM: Koomey Mod. 80, 3,000-psi accumulator; one 29 1/2″ Hydril GK; one set 16 5/8″ (annular, double, single); one set 13 5/8″.

CRANES: Three LeTourneau PCM-120, 45.3 t 100′ boom.

REMARKS: Currently in accomodation mode.

TOTONACA

DESIGN: Friede & Goldman, Ltd., L-780.

CONSTRUCTION: Gotaverken Arendal, Sweden 1981.

HULL: 180,x 175’x 25′.

VARIABLE LOAD: 2,114 t.

HELIPORT: 62′ dia.

STORAGE: Mud & Cmt. Bulk–6,000 cf; Liquid Mud-1,805 bbl; Fuel–2,050 bbl; Water for Drilling–5.452 bbl; Potable Water-1,197 bbl.

DRILLING EQUIPMENT: Drawworks–Mid Continent U-1220 BE, 2,000 hp.

CRANES: Link Belt 218 and 238.

REMARKS: Reportedly in accommodation mode, const. support.

OTHER DATA: Typical of Nahuati.

WORK AREA: Bay of Campeche, Mexico.

Perforadora Mexico S.A.

SONORA

DESIGN: Marathon LeToumeau, 82-SD-C.

CONSTRUCTION: Marathon LeTourneeu, Browsville, Texaa, 1979.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 90 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 3,280 kips plus 1,000 kips substructure load.

HELIPORT: Sikorsky 5-81.

STORAGE: Mud & Cmt Bulk–7,660 cf & 3,000 sks; Liquid Mud–1,294 bbl; Fuel–2,119 bbl; Water for Drilling–6,600 bbl; Potable Water– 83 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C2, 1,600 hp; Pumps–Emaco FB 1600; Prime movers–three EMD 16-645 E8; Rotary Table–Emsco T3750; Top Drive–Varco TDS-500 t.

DERRICK: Emsco, 147′ x 30′, 1,000,000-lb static hook load

BOP SYSTEM: Cameron single and double 13 5/8″; 10,000 psi; Shatter 13 5/8″, 5,000 psi; Shaffer spherical 21 1/4″, 2.000 psi.

CRANES: Three LeTourneau PCM-120 AS w/100′ boom, 50t @ 24′.

REMARKS: Formerly Western Triton III.

WORK AREA: Mexico.

Petrobaltic

BALTIC BETA

DESIGN: ETA, Europe

CONSTRUCTION: CFEM, Dunkerque, 1977.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 230′ x 212′ x 27′.

VARIABLE LOAD: 3,500 mt.

HELIPORT: Suitable for S-61.

STORAGE: Mud & Cmt–12,500 cf; Fuel–3,475 bbl; Water for Drilling–6,290 bbl; Potable-1,320 bbl.

DRILLING EQUIPMENT: Drawworks–National 1320 UE; Pumps–Two National 12-P-160; Prime movers–Three Pielstic 5,655 total bhp; Generator 1 700 kW Cat. 3516 SITA; Rotary Table — National C-495; Pipe Handling System–Iron Roughneck; Top Drive–MN DDM 650.

DERRICK: 160′; 950,900 lb

BOP SYSTEM: 13 5/8″ stock, 10,000 psi; 21 1/4″; 2,000 psi.

CRANES: One CFEM and one Bucyrus Erie.

REMARKS: Formerly Dyvi Beta and Weal Beta; reportedly in production mode

WORK AREA: Baltic Sea.

PETROBALTIC

DESIGN: Levingston L-111, slot

CONSTRUCTION: Verolme Dock & Shipbuilding, Rotterdam, Holland, 1979.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′

QUARTERS: 80 persons.

HULL: 208′ x 174′ x 23′.

VARIABLE LOAD: 3,863 kips.

HELIPORT: 85′ S-61.

STORAGE: Mud & Cmt Bulk–10,000 cf; Liquid Mud-1,540 bbl; Fuel–4,177 bbl; Water for Drilling–8,610 bbl; Potable Water–906 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE; Pumpa-Nat’l. 12-P-160; Prime movers–live Cat-D 399 TA + GE 5-AT1; Rotary Table–Nat’l. C-375; Top Drive-Maritime Hydraulics PTD-1.

DERRICK: Bailey 4E.

BOP SYSTEM: 29 1/2″ diverter Shatter 21 1/4″ x 2,000 psi spherical and 20%” x 3,000 psi ram; one Shatter 13 5/8″ x 10,000 psi spherical and three 13 5/8″ x 10,000 psi rams.

CRANES: Sanders DA-40-120, 50 Ion @ 6.5 m

WORK AREA: Baltic Sea.

Petroleo Brasileiro S.A. (Petrobras)

PETROBRAS III

DESIGN: IHC Holland Corp.

CONSTRUCTION: IHC Holland Corp., 1974.

PERFORMANCE: Water depth–260.2′; Drilling depth–14,436′.

QUARTERS: 93 persons.

HULL: 220′ x 209′ x 25′.

VARIABLE LOAD: 1,784

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–6,250 of & 1,328 sks; Liquid Mud-1,340 bbl; Fuel–5,867 bbl; Water for Drilling–3,602 bbl; Potable Water-1,511 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumps–Two Nell 12-P-160, triplex; Prime movers-Three EMD A20-6-16; Rotary Table–Nat’l C-375, 37 1/2″ x 650 t.

DERRICK: Continental Emsco, 147′; 1,400,000 tb.

BOP SYSTEM: Shatter 21 1/4″, 2,000 psi; 13 5/8″, 10,000 psi Cameron U type.

CRANES: Two Marathon Le Tourneau PC-120-AS, 45 t.

REMARKS: Formerly Penrod 63.

WORK AREA: Brazil, Espirito Santos basin.

PETROBRAS IV

DESIGN: RG LeTourneau, Inc.

CONSTRUCTION: RG LeTourneau, Inc., France, 1969.

PERFORMANCE: Water depth-102′; Drilling depth–8,530′.

QUARTERS: 70 persons.

HULL: 116’x 129′ x 15′,

VARIABLE LOAD: 973 t.

HELIPORT: 37.4′ x 37.4′.

STORAGE: Mud & Cmt Bulk–2,460 cf & 314.5 sks; Liquid Mud–488 bbl; Fuel–530.2 bbl: Water for Drilling–1,974.4 bbl; Potable Water–416.4 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 55-E; Pumps–Two Nat’l 8-P-80 triplex; Prime movers–Three Cat. 3512; one Cat. D-398; Rotary Table-Nat’l C-375, 37 1/2″ x 650 t.

DERRICK: Ideco KM 100-400 VM, 131′; 400,000 lb.

BOP SYSTEM: Shatter 21 1/2″, 2,000 psi; 13%”, 5,000 psi Cameron U type.

CRANES: One Marathon LeTourneau RD-120-AS, 45 t; one Houston, 12.5 t.

REMARKS: Formerly Western Oceanics’ Western Star.

WORK AREA: Brazil, Sergipe-Alagoas basin.

PETROBRAS V

DESIGN: The Offshore Co.

CONSTRUCTION: Veroime Estaleinos Reunidos do Brasil S.A., Brazil, 1978.

PERFORMANCE: Water depth–230′; Drilling depth–25,000′.

QUARTERS: 89 persons.

HULL: 227′ x 134′ x 21′.

VARIABLE LOAD: 1,905 t.

HELIPORT: 54.9′ x 87.7′.

STORAGE: Mud & Cmt Bulk–7,200 cf & 1,000 sks; Liquid Mud-1,300 bbl; Fuel–4,222 bbl; Water for Drilling–7,795 bbl; Potable Water– 747 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 760-F, 500 t; Pumps–Two Nat’l 12-P-160, triplex; Prime movers–Three EMD 16-645-E8, 2,200 hp, 900 rpm; Rotary Table-Nat’l C-375, 37 1/2″, 650 t; Top Drive–N/A.

DERRICK: Pyramid API-STD-4E, 147′; 825,000 lb.

BOP SYSTEM: Shaffer 21 1/2″, 2,000 psi; Shaffer 13 1/2″, 10,000 psi.

CRANES: Two Marathon LeTourneau PC-120-AS, 45 t; one Unit 750, 20 t.

REMARKS: Upgraded for HTHP wells.

WORK AREA: Sergipe-Alagoas basin, Brazil.

Petroleos Mexicanos (PEMEX)

HOLKAN

DESIGN: Modec 300-C

CONSTRUCTION: Mitsui Ocean Development Co. Ltd., Japan, 1982.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 81 persons.

HULL: 219′ l0″ x 190′ 3″ x 25′ 7″.

VARIABLE LOAD: 1,500 t.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–7,078 cf & 3,000 sks; Liquid Mud–2,172 bbl; Fuel-2,822 bbl; Water for Drilling–5,447 bbl; Potable Water– 2,225 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-DE, 3,000 hp, powered by three GE-752AR, 1,000 hp each; Pumps–Two Nat’l 12-P-160, triplex, 7 1/2″ x 12″, 1,600 hp each: Prime movers–four Cat D 399, 1,500 kw; Rotary Table-Nat’l C-375, 37 1/2″, powered by GE-752-AR, 1,000 hp each.

DERRICK: DSI., 147′ x 30′ x 30′; 1,000,000 lb.

BOP SYSTEM: Regan diverter; C1W 21 1/2″ 2K, 13 1/2″ 10 K, 7 1/2″ 15K.

CRANES: Two Nat’l diesel hydraulic, 80/75 t.

WORK AREA: Bay of Campeche, Mexico.

Petromar

ATLAS

DESIGN: Sonat Offshore Co., Orion type, Class A1, self-elevating Jackup

CONSTRUCTION: Galatz Shipyard, Romania, 1985.

PERFORMANCE: Water depth–295.2′; Drilling depth–14,760′.

QUARTERS: 80 persons.

HULL: 172′ x 134′ x 21′.

VARIABLE LOAD: 1,820 mt.

HELIPORT: 80′ x 80′.

STORAGE: Mud & Cmt Bulk-9,900 cf; Liquid Mud-1,610 bbl; Fuel–1,600 bbl; Water for Drilling–1,600 bbl; Potable Water-1,333 bbl.

DRILLING EQUIPMENT: Drawworks–Upetrom-TFM 38 E 2,300 hp; Pumps–two Upetrom 2 PN 1600 duplex, 1,600 hp: Prime movers-three Resita 12LDSR 2,500 hp ea; Rotary Table–Upetrom MRL-375 37 1/2″.

DERRICK: TD-320/43 R, 144.5′; 320 t.

BOP SYSTEM: Two Upetrom “DF” 13 3/2″, 10,000-psi double; One Upetrom “VH” 13 1/2″, 5,000 psi.

CRANES: Two IMT 50 tons.

WORK AREA: Black Sea.

FORTUNA

DESIGN: 100 AS self elevating.

CONSTRUCTION: Galatz Shipyard, Romania, 1985.

REMARKS: Managed by KCA Drilling Ltd.

OTHER DATA: Typical of Atlas.

WORK AREA: Iran.

GLORIA

CONSTRUCTION: Galatz Shipyard, Romania, 1976.

STORAGE: Mud & Cmt Bulk–7,420 cf; Liquid Mud-1,610 bbl; Fuel-1,635 bbl: Water for Drilling–2,044 bbl; Potable Water–628 bbl.

CRANES: Two Link Belt ABS 218 75 tons.

REMARKS: Operating in production mode for Petromar.

OTHER DATA: Same as Atlas.

WORK AREA: Black Sea.

JUPITER

CONSTRUCTION: Galatz Shipyard, Romania, 1987.

OTHER DATA: Typical of Atlas.

WORK AREA: Black Sea.

ORIZONT

DESIGN: Class 100 A5 self elevating

CONSTRUCTION: Galatz Shipyard, Romania, 1982.

CRANES: Two Link Belt 218 ABS 75 ton.

REMARKS: Managed by KCA Drilling Ltd.

OTHER DATA: Typical of Atlas.

WORK AREA: Iran.

PROMETEU

CONSTRUCTION: Galatz Shipyard, Romania, 1984

OTHER DATA: Typical of Atlas.

WORK AREA: Black Sea.

SATURN

CONSTRUCTION: Galatz Shipyard, Romania, 1987.

OTHER DATA: Typical of Atlas.

WORK AREA: Black Sea.

Petroleos de Venezuela (PDVSA)

GP-19

DESIGN: Baker Marine Corp., 150-H Cantilever

CONSTRUCTION: Baker Marine Corp., Ingleside, Texas, 1981, Refit 1987

PERFORMANCE: Water depth–150′; Drilling depth-25,000′.

QUARTERS: 48 persons.

HULL: 173′ x 161′ 18′

VARIABLE LOAD: 4,200 st.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk-6,000 cf; Liquid Mud-1,300 bbl; Fuel–1,500 bbl: Water for Drilling–3,360 bbl; Potable Water-1,080 bbl.

DRILLING EQUIPMENT: Drawworks–Midco U-1220 EB; Pumps–GD PZ-11 Triplex: Prime movers–four Cat D-398 TA; Rotary Table–Gardner-Denver 37 1/2″; Top Drive–Varco.

DERRICK: Dreco 160′; 1,300,000-lb static hook load capacity.

BOP SYSTEM: Hydril 13 1/2″, 5,000 psi; three CIW 13 1/2″, 10,000 psi rams.

CRANES: Baker Marine Corp. 80-ton.

REMARKS: Formerly Charger II and ENSCO III; sold to Maraven 3/90. Managed by Pride International.

WORK AREA: Venezuela.

GP-20

DESIGN: Baker Marine Corp., BMC 200 I.C

CONSTRUCTION: Baker Marine Corporation, Alexandria, Egypt, 1982.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′.

QUARTERS: 70 persons.

HULL: 174′ x 162′ x 18′.

VARIABLE LOAD: 3,500 st.

HELIPORT: 62′ hex.

STORAGE: Mud & Cmt Bulk-8,100 cf; Liquid Mud-1,900 bbl: Fuel-1,600 bbl; Water for Drilling–3,000 bbl; Potable Water–1,080 bbl.

DRILLING EQUIPMENT: Drawworks–Dreco 2000 E; Pumps–Two Gardner Denver PZ-11: Prime movers–Three EMD MD 12E9BG; Rotary Table–Gardner Denver RT 37 1/2″; Top Drive–Varco.

DERRICK: 147′; 1,300.000 lb hook load.

BOP SYSTEM: CIW 13 1/2″, 5,000 psi annular; Three CIW 13 1/2″, 10,000 psi rams.

CRANES: Two BMC 900,30 ton.

REMARKS: Formerly H.L. Cecil and ENSCO IV: sold to Maravan 3/90. Managed by Pride International.

WORK AREA: Venezuela.

Porterhouse Ltd.

ODIN VICTORY

DESIGN: Bethlehem Steel Corp., JU-250 MS

CONSTRUCTION: Bethlehem Steel, Singapore, 1979

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS:78 persons.

HULL: 166′ x 132′ x 16′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60 x 60′.

STORAGE: Mud & Cmt Bulk-6,600 cf+3,000 sks: Liquid Mud–1,500 bbl; Fuel-2,100 bbl; Water for Drilling-4,850 bbl; Potable Water–870 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–two Nat’l 12-P-160: Prime movers– two 16 cyl EMD, one 12 cyl EMD; Rotary Table-Nat’l C-375: Top Drive–Canrig 1050-E.

DERRICK: Branham 147′; 1,044,000-lb hook load.

BOP SYSTEM: Two NL Shaffer 13 3/2″ 10,000 psi, double & single; one NL Shaffer 13 1/2″ 5,000 psi.

CRANES: Two FMC Link Belt ABS-218, 100′.

REMARKS: Formerly Montreal III and NORAM 253 and Ocean Buy. Managed by Hercules Offshore Corp.

WORK AREA: N/A

Pride International, Inc.

PRIDE ALASKA

DESIGN: Bethlehem; JU-250 MC

CONSTRUCTION: Bethlehem Steel Shipbuilding, Beaumont, Texas, 1982.

PERFORMANCE: Water depth–25′-250′; Drilling depth–25,000′.

QUARTERS: 54 persons.

HULL: 166′ x 145′ x 20′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60′ x 70′

STORAGE: Mud & Cmt Bulk–9,460 cf; Liquid Mud–1,476 bbl; Fuel–2,093 bbl: Water for Drilling-6,150 bbl; Potable Water-1,064 bbl.

DRILLING EQUIPMENT: Drawworks–U-1220 EB Pumps–two GD PZ-11, 1,600 hp: Prime movers–three 12 cylinder EMD w/6 EMD D97 generators, 645 kW DC: Rotary Table-37 1/2″.

DERRICK: 147′, 1,044,000 lb.

BOP SYSTEM: Two Cameron 13 3/2″, 10,000 psi double type U rams; Shaffer 13%”, 5,000 psi annular; Hydril 21%”, 2,000 psi diverter.

CRANES: Two Sea-King Model 1400, 100′.

REMARKS: Formerly Griffin-Alexander VII, Constitution and Noble-Marvin Winters; 1,000,000 lb rated cantilever load.

WORK AREA: Gulf of Mexico.

PRIDE COLORADO

DESIGN: Bethlehem; JU-200 MC.

CONSTRUCTION: Bethlehem Steel Shipbuilding, Sparrows Pt., MD, 1982.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′.

QUARTERS: 53 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 3,500 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–7,025 cf; Liquid Mud-1,595 bbl; Water for Drilling-5,592 bbl; Potable Water-1,050 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2500; Pumps–two Oilwell A-1700 PT; Prime movers–three EMD 12-645 E8; Rotary Table–Oilwell B-37 1/2″.

DERRICK: Pyramid 147′ x 30′; 1,044,000 lb.

BOP SYSTEM: 13%” Cameron, 10,000 psi.

CRANES: Two Skagit 343 w/ 100′ booms.

REMARKS: Formerly Cheyenne and Noble-Red McCarty.

WORK AREA: Gulf of Mexico.

PRIDE MISSISSIPPI

DESIGN: Bethlehem JU-200MC

CONSTRUCTION: Bethlehem Steel Corp., Singapore, 1981. Refurbished 1990.

PERFORMANCE: Water depth-200′; Drilling depth–25,000′.

QUARTERS: 53 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–6,000 cf+3,000 sks; Liquid Mud-1,464 bbl: Fuel-2,223 bbl; Water for Drilling–4,947 bbl; Potable Water– 1,050 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps-Nat’l 12-P-160 Triplex; Prime movers–three EMD MD12E8; Rotary Table-Nat’l C-375.

DERRICK: Pyramid 147′; 1,044,000 lb.

BOP SYSTEM: One single, one double Cameron 13%” 10K ram: One Shaffer 13%” 5K.

CRANES: One ABS-218A Link Belt, 60,000 lb; one ABS-218 Link Belt, 50,000 lb.

REMARKS: Formerly Sabine IV and Noble-Duke Hinds.

OTHER DATA: Cantilever capability to maximum of 45′.

WORK AREA: Gulf of Mexico.

PRIDE NEW MEXICO

DESIGN: Bethlehem Steel Corp., JU-200-MC.

CONSTRUCTION: Bethlehem Steel Corp., 1982.

PERFORMANCE: Water depth–23′-200′; Drilling depth–25,000′.

QUARTERS: 50 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 3,300 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–8,660 cf; Liquid Mud-1,331 bbl; Fuel–2,200 bbl; Water for Drilling–5,900 bbl; Potable Water–1,000 bbl.

DRILLING EQUIPMENT: Drawworks-MIDCO 1220EB: Pumps–Two GO PZ-11, 1,600 hp; Prime movers–three 12 cyl EMD, 1,850 hp each w/6 EMD D97 generators, 645 kW DC: Rotary Table-37 1/2″.

DERRICK: Branham 147′:1,044,000 lb.

BOP SYSTEM: Two 13 1/4″ Cameron type U 10K

BOP: 5K pal Hydril; Hydril 21 1/4″, 2K diverter.

CRANES: Two See King 1400 w/ 100′ booms.

REMARKS: Formerly Griffin-Alexander IV, Discovery and Noble-Frank Lamaison.

WORK AREA: Gulf of Mexico.

PRIDE ALABAMA

DESIGN: Bethlehem, JU-200 MC.

CONSTRUCTION: Bethlehem Steel, Sparrows Point, MD, 1982

REMARKS: Formerly Griffin-Alexander VI, Independence and Noble Mac McCoy.

OTHER DATA: Typical Pride New Mexico.

WORK AREA: Gulf of Mexico.

PRIDE ARKANSAS

DESIGN: Bethlehem, JU-200 MC.

CONSTRUCTION: Bethlehem Steel, Beaumont, Texas, 1982.

PERFORMANCE: Water depth–23′-200′; Drilling depth–20,000′.

VARIABLE LOAD: 4,290 kips.

REMARKS: Formerly Griffin-Alexander V. Enterprise and Noble W.T. Johnson.

OTHER DATA: Typical Pride New Mexico.

WORK AREA: Gulf of Mexico.

PRIDE WYOMING

DESIGN: Bethlehem JU-250M5, mat slot

CONSTRUCTION: Bethlehem Steel, Beaumont, 1976.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′

QUARTERS: 56 persons.

HULL: 166′ x 132′ 16′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–6,030 cf; Liquid Mud-1, 500 bbl; Fuel-1,796 bbl; Water for Drilling–4,702 bbl; Potable Water–472 bbl.

DRILLING EQUIPMENT: Drawworks–Mid Continent U-1220 BE, 2,000 hp; Pumps–two Gardner Denver PZ-11; Prime movers–four Detroit diesel 16V149 TI, 1,600 hp; Rotary Table-Cont’l. Emaco 37 1/2″.

DERRICK: Pyramid 147′ x 30,1,000,000 lb GNC.

CRANES: Two Bucyrus-Erie Model MK-60, one w/120′ boom, one w/ 100′ boom.

REMARKS: Former Salenergy I, Horizon and Noble-Cliff Matthews; equipped for oil-base mud. WORK AREA: Gulf of Mexico.

PRIDE CALIFORNIA

DESIGN: Bethlehem Steel Corp.; JU-250-MS

CONSTRUCTION: Bethlehem, Singapore, 1076.

PERFORMANCE: Water depth–250′; Drilling depth-20,000′

QUARTERS: 84 persons.

HULL: 166′ x 109′ 18′.

VARIABLE LOAD: 4,070 kips.

HELIPORT: Sikorsky S-61.

STORAGE: Mud & Cmt Bulk-7,500 cf & 3,000 ska; Liquid Mud-1,565 bbl; Fuel-1,742 bbl; Water for Drilling–4,705 bbl; Potable Water–803 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE, 1,600 hp; Pumps–two Nat’l 10-P-130 Triplex; Prime movers–two EMD 16-645 ES, one EMD 8-645-EB Ross Hill SCR; Top Drive-Nat’l Oliwell 550/650.

DERRICK: Pyramid 147′ x 30′; 1,300,000 lb GNC.

BOP SYSTEM: N/A.

CRANES: Two FMC Link Belt ABS-215 w/ 100′ booms

REMARKS: Formerly Westem Polaris I and NobleFrank Reiger.

WORK AREA: Gulf of Mexico

PRIDE KANSAS

DESIGN: Bethlehem, JU-200 MC/JU-260-MC.

CONSTRUCTION: Bethlehem, Singapore 1976.

Refurbished 1994, cantilever refurbished 1998.

PERFORMANCE: Water depth–250′; Drilling depth-25,000′

QUARTERS: 80 persons.

HULL: 166′ x 109′ x 16′.

VARIABLE LOAD: 3,960 kips & 950 kips substructure load.

HELIPORT: S-61 M.

STORAGE: Mud & Cmt. Bulk-6,900 of. 3,000 sks; Liquid Mud-1,565 bbl; Fuel-2,164 bbl; Water for Drilling–4,705 bbl; Potable Water–693 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625; Pumps–Three Emsco FB 1600; Prime movers–Five Cat. 3512 Type B, DITA diesel engines; Rotary Table-Nat’l C-375; Top Drive-Nat’l Oilwell PS2 650/650.

DERRICK: IRI API 4F Model VLTLC 1,400 kips.

BOP SYSTEM: Single/double Cameron 13%”, 10,000 psi and 13%”, 5,000 psi annular.

CRANES: Two Nautilus 340L-100 67.

REMARKS: Formerly Western Polaris II and Noble Linn Richardson.

WORK AREA: Gulf of Mexico.

PRIDE LOUISIANA

DESIGN: Bethlehem JU-250 MS

CONSTRUCTION: Bethlehem Steel Corp., Singapore, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 76 persons.

HULL: 166′ x 132′ 16′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–6,600 cf; Liquid Mud-1,500 bbl; Fuel–1,600 bbl; Water for Drilling–4,850 bbl; Potable Water–900 bbl.

DRILLING EQUIPMENT: Drawworks–Cont. Emsco C-3 Type II; Pumps–Two Cont. Emaco FB-1600; Prime movers–Three EMD 12-645; Rotary Table–Cont. Emaco T-3750.

DERRICK: Cont. Emsco 147′ x 30′; 1,000,000 lb GNC.

BOP SYSTEM: 13 1/4″, Cameron, 10,000 psi; Diverter-Hydril MSP 21 1/4″, 2,000 psi.

CRANES: Two FMC Link Belt ABS-215, 100′.

REMARKS: Formerly Transworld Rig 71 and Noble-Jim Baracom.

WORK AREA: Gulf of Mexico.

PRIDE CABINDA

DESIGN: Levingston.

CONSTRUCTION: Ishikawagima do BrasilEstaleiros S.A., Brazil, 1982

PERFORMANCE: Water depth–300′; Drilling depth-25,000′.

QUARTERS: 92 persons.

HULL: 200′ x 186′ x 23′.

VARIABLE LOAD: 1,570 t.

HELIPORT: 65.6′ x 75.1′.

STORAGE: Mud & Cmt Bulk–7,200 cf & 558 sks; Liquid Mud-1,124 bbl; Fuel-2,972 bbl; Water for Drilling–4,894 bbl; Potable Water–2,424 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625 DE; Pumps–Two Nat’l 12-P-160, triplex; Prime movers–Three EMD MO-16-EB, 2,200 hp, 900 rpm; Rotary Table-Nat’l C-375, 37 1/4″; Top Drive–Verco TDS-3.

DERRICK: Dreco 147′; 1,000.000 lb.

BOP SYSTEM: Shaffer 21 1/4″, 2,000 psl; one 13 1/4″, 10,000 psi.

CRANES: Two American 5750, 35 t; one Herbert Ramos GB-35-HE, 35 t

REMARKS: Formerly Petrobras XI.

WORK AREA: West Africa, Angola.

PRIDE MONTANA

DESIGN: Hitachi Drill Hope C-150.

CONSTRUCTION: Hitachi Zosen, 1981.

PERFORMANCE: Water depth–270′; Drilling depth-20,000′.

QUARTERS: 80 persons.

HULL: 193′ x 174′ x 21′.

VARIABLE LOAD: 2,000 t (drilling).

HELIPORT: 65′ dia, S-61N.

STORAGE: Mud & Cmt. Bulk-9,040 cf; Liquid Mud-1,700 bbl; Fuel–2,390 bbl; Water for Drilling–2,673 bbl; Potable Water-1,635 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE, 2,000 hp; Pumps–Two Nat’l 12-P-160 triplex, 1,600 hp; Prime movers–Five Cat. D-399-TA, 1,215 hp, driving Kato 600 V AC 900-kW generators; Rotary Table-Nat’l C-375, 37 1/4″, electric drive; Top Drive–Varco TDS-100.

DERRICK: Pyramid 158′; 1,300,000-lb GNC.

BOP SYSTEM: One 20″, 2,000 psi Hydril annular; one 13 1/4″, 5,000 psi Cameron D annular; one single/one double 13 1/4″, 10,000 psi Cameron U ram.

CRANES: Two Skagit D 343.

REMARKS: Zero discharge; formerly lie Du Levant

OTHER DATA: Drills in skid off mode. Cantilever extends to 40″.

WORK AREA: Worldwide.

PRIDE TEXAS

DESIGN: Bethlehem Steel Corp., JU-300 MS

CONSTRUCTION: Bethlehem Steel Corp.. Beaumont, Texas, 1974.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 86 persons.

HULL: 166′ x 109′ x 20′.

VARIABLE LOAD: 4,966 kips.

HELIPORT: 65′ x 60′.

STORAGE: Mud & Cmt Bulk–4,080 cf & 2,500 cf; Liquid Mud-1,500 bbl; Fuel-2,000 bbl; Water for Drilling–5,000 bbl; Potable Water–900 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3 Type II; Pumps–Three Emaco FB-1600, Prime movers–Five Cat. 3512 Type B engines rated @ 1,176 hp ea.; Rotary Table–Emsco T-3750; Top Drive–Nat’l Oilwell PS 2 650/650.

DERRICK: 147; 1,050,000-lb hook load capacity.

BOP SYSTEM: 13 1/4′, w/one 5,000-psi WP Hydril GK, one Cameron U single, one Cameron U 10,000-psi WP double; 21 1/4″ 2,000 psi WP Hydril MSP annular.

CRANES: one Link Belt, 22t @ 40′; one Clyde, 40 t @ 60′.

REMARKS: Formerly Transworld 62 and Noble-Cecil Forbes.

WORK AREA: Gulf of Mexico.

PRIDE UTAH

DESIGN: Bethlehem JU-45 MS. 4 cyl. legs

CONSTRUCTION: Bethlehem steel, Beaumont, TX., 1978; Convert to MC 2001.

PERFORMANCE: Water depth – 45′; Drilling depth – 20,000′.

QUARTERS: 64

HULL: 160′ x 72′

VARIABLE LOAD: 1,362 t.

HELIPORT: N/A

STORAGE: N/A

DRILLING EQUIPMENT: Drawworks – Gardner Denver 1,500 – E; Pumps-two G D PZ -10 triplex; Prime movers – three GM EMD 12-645 -El, 1,650 hp; Rotary table – N/A.

DERRICK: L. C. Moore 142′. 1,300,000 lb cap.

BOP SYSTEM: 13 1/4′, 5,000 psi.

CRANES: Two Unit Mariner 280-H, 28 t.

REMARKS: Formerly NN-1, Nigeria

WORK AREA: Gulf of Mexico, shallow offshore water.

PRIDE OKLAHOMA

DESIGN: Bethlehem Steel Corp., JU-250 MS

CONSTRUCTION: Bethlehem Steel Corp., Singapore, 1975. Refurbished 1992.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 68 persons.

HULL: 166′ x 108′ x 16′.

VARIABLE LOAD: 4,500 kips

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–6,590 cf & 3,000 sks; Liquid Mud-1,600 bbl; Fuel–1,796 bbl; Water for Drilling-4,234 bbl; Potable Water–900 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3 Type II; Pumps-two Emaco FB-1,600, Prime movers–three GM EMD 12-645; Rotary Table–Emsco T-3750.

DERRICK: Lee C. Moore 147′ x 30′; 1,060,000 lb.

BOP SYSTEM: 20″ 2,000 psi Hydril; 13 1/4″ 10,000 psi w/one Hydril & three CIW U rams.

CRANES: Two FMC Link Belt ABS-218,100′.

REMARKS: Formerly Transworld Rig 63 and Noble-Jack Clark.

WORK AREA: Gulf of Mexico.

PRIDE PENNSYLVANIA

DESIGN: Marathon LeTourneau Class 53-C.

CONSTRUCTION: Built by Marathon LeToumeau, Vicksburg, Miss.; 1973. Upgraded to cantilever 1990-91.

PERFORMANCE: Water depth–30-300′; Drilling depth–20,000′.

QUARTERS: 76 persons.

HULL: 231′ x 200′ x 26′

VARIABLE LOAD: 1,397 mt.

HELIPORT: 70′ x 70′.

STORAGE: Mud & Cmt Bulk–9,500 cf; Liquid Mud–1,423 bbl; Fuel–2,860 bbl; Water for Drilling–12,577 bbl; Potable-1,017 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3, 2,000 hp; Pumps–Emaco F-1600; Prime Movers–five Cat. D-399; Rotary Table-Emsco 37 1/2″; Top Drive–TDS MS.

DERRICK: Lee C. Moore 147′ 1,000,000 lb.

BOP SYSTEM: Cameron 13 1/2″ double and single bag; 20″ single + bag; Hydril 29″ bag.

CRANES: MLT PCM x 3.

MOORING: Four MRT Electric winches with 1/2″ wireline

REMARKS: Formerly Andrade Gutlerrez VI, and Foresight Driller III. Rig equipped w/410′ legs.

WORK AREA: Worldwide.

PRIDE ILLINOIS

DESIGN: Bethlehem MS 225

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1969. Upgraded 1993.

PERFORMANCE: Water depth-225′; Drilling depth-20,000′

QUARTERS: 48 persons.

HULL: 176′ x 109′ x 16′.

VARIABLE LOAD: 4,500 klps.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–7,950 cf; Liquid Mud-1,500 bbi; Fuel-1,796 bbl; Water for Drilling–4,848 bbl; Potable Water–472 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l N1320M powered by two Cat D-399; Pumps–two Nat’l 10-P-130 triplex powered by 16-567 EMD engines; Prime movers–two 750 kW gen. powered by EMD12-567 engines; Rotary Table-Nat’l C-375.

DERRICK: Emsco 147′; 1,400,000-lb hook load

BOP SYSTEM: One 21 1/4″, 2,000 psi Shaffer annular; One Shaffer 13 1/2″, 5,000 psi annular; One Cameron U 13 1/4″, 10,000 psi single; One U 13 1/4″, 10,000 psi double.

CRANES: One LeTourneau PCM-120-AS. 100′, 98,400 lb at 24′; one Link-Belt ABS 108-B, 70′, 64,100 lb at 15′.

REMARKS: Formerly J Storm 1, Marine 1 and Marine 225.

WORK AREA: Gulf of Mexico.

PRIDE KENTUCKY

DESIGN: Bethlehem JU 250 MS.

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1974.

PERFORMANCE: Water depth-262′; Drilling depth–25,000′.

DRILLING EOUIPMENT: Drawworks-Nat’l 1625-M; Pumps-Nat’l 12-P-160 triplex.

REMARKS: Formerly J. Storm 3 and Marine 3.

OTHER DATA: Typical Pride Illinois.

WORK AREA: Gulf of Mexico.

PRIDE MICHIGAN

DESIGN: Bethlehem MS 250

CONSTRUCTION: Bethlehem Steel Corp. 1975

PERFORMANCE: Water depth–250; Drilling depth-25,000′.

DRILLING EQUIPMENT. Drawworks–Nat’l 1625-M powered by three PTD-8 Superior engines; Pumps-two Nat’l 12-P-160 triplex powered by 18-557 EMD engines; Prime movers–two 700-kW gen. powered by 12-567 EMD engines; Rotary Table-Nat’l C-375.

REMARKS: Formerly Marine 4.

OTHER DATA: Typical Pride Illinois.

WORK AREA: Gulf of Mexico

PRIDE GEORGIA

DESIGN: Bethlehem MS 250

CONSTRUCTION: Bethlehem Steel Corp. 1981, upgraded 1995.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′

HULL: 176′ x 132′ x 16′.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320-M powered by two D-399 Cat. engines; Pumps-two Nat’l 12-P-160 triplex powered by variable speed hyd. drive; Prime movers–two 750 kW gen. powered by 12-567 EMD engines; Rotary Table-Nat’l C-375; Top Drive–Maritime Hydraulics.

CRANES: One Link Belt 218 w/ 100′ boom; one Link Belt 138 ABS w/70′ boom rated at 109,500 lb @ 20′ radius.

REMARKS: Formerly Marine 16.

OTHER DATA: Typical Pride Illinois.

WORK AREA: Gulf of Mexico.

PRIDE MISSOURI

DESIGN: Bethlehem MC cantilever

CONSTRUCTION: Bethlehem Steel Corp., 1982.

PERFORMANCE: Water depth–250′; Drilling depth-20,000′

HULL: 166′ x 145′ x 20′.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–8,100 cf; Liquid Mud-1,509 bbl; Fuel–2,093 bbl; Water for Drilling-6,145 bbl; Potable Water-1,064 bbl.

DRILLING EQUIPMENT Drawworks-Nat’l 1320-M powered by two D-399 Cat. engines; Pumps–two Nat’l 12-P-160 triplex powered by 16-567 EMD engines; Prime movers–two 750 kW gen. powered by 12-567 EMD engines.

CRANES: Two Link Belt 138-A rated 65 tons.

REMARKS: Cantilever can be extended 45′ from stern and 12′ rotary movement from centerline. Formerly Marine 18.

WORK AREA: Gulf of Mexico.

PRIDE ARIZONA

DESIGN: Baker Marine MS 250 jack-up

CONSTRUCTION: Baker Marine Corp, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 44 persons.

STORAGE: Mud & Cmt Bulk–7,150 cf; Liquid Mud-1,258 bbl; Fuel-1,222 bbl; Water for Drilling-4.922 bbl; Potable Water–773 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-M powered by three D-399 Cat, engines; Pumps–two Nat’l 12-P-160 triplex powered by 16-567 EMD engines; Prime movers–two 750-kW gen. powered by 12-567 EMD engines; Rotary Table-Nat’l C-375; Top Drive–Maritime Hydraulics.

BOP SYSTEM: One 21 3/4″, 2,000-psi Hydril annular; One Shaffer 13 5/8″, 5,000-psi annular; One Cameron U 13 5/8″, 10,000-psi double; one CIW U, 13 5/8″, 10,000 psi single.

CRANES: One LeTourneau PCM-120-AS, 100′, 98,400 lb at 24′; One Link Belt ABS 106-B, 90′, 45,700 lb at 20′.

REMARKS: Formerly Marine 15

WORK AREA: Gulf of Mexico.

PRIDE FLORIDA

DESIGN: Bethlehem MC cantilever/jack-up 200

CONSTRUCTION: Bethlehem Steel Corp. 1981.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 49 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500 klps.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk 8,500 cf; Liquid Mud-1,500 bbl; Fuel–2,068 bbl; Water for Drilling-5,992 bbl; Potable Water–1,063 bbl.

DRILLING EOUIPMENT: Drawworks-Nat’l 1320 powered by two D-399 Cat. engines; Pumps-two Nat’l 12-P-160 triplex powered by 16-567 EMD engines; Prime movers–two 700-kW gen. W/12-567 EMD engines; Rotary Table-Nat’l C-375.

DERRICK: Emaco 147′; 1,400,000-lb hook load capacity.

BOP SYSTEM: One Shaffer 21 1/4″, 2,000-psi annelar One Shaffer 13 5/8″, 5,000-psi annular Cameron U 13 5/8″, 10,000-psi single and double; One “U” 13 5/8″, 10,000-psi shear ram.

CRANES: One Link Belt-108-B 50 tons; One Link Belt ABS-138-A, 90′

REMARKS: Formerly J Storm XVII and Marine 17.

WORK AREA: Gulf of Mexico.

PRIDE NEBRASKA

DESIGN: Bethlehem Steel Corp., 200 MC

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1981.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 50 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,450 klps.

HELIPORT: 80′ x 75′.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud–1,698 bbl; Fuel–2,340 bbl; Water for Drilling–5,948 bbl; Potable Water-1,050 bbl.

DRILLING EQUIPMENT: Drawworks–C-II, 2,000 hp; Pumps–Emsco FB-1600; Prime movers–three EMD MD 12E8 w/1,050 kW A.C. gens & Ross Hill SCR; Rotary Table–Emsco T-3750; Top Drive–Varco TDS-3.

DERRICK: Emsco 147′, 1,400,000-lb.

BOP SYSTEM: Three NL SL type 10,000 psi; One NL spherical 5,000 psi; one Shaffer 21″””, 2,000 psi annular: one Shaffer 13″””, 5,000 psi annular, one Shaffer 13″””, 10,000 psi double.

CRANES: Two FMC Link Belt 218A, 100′.

REMARKS: Formerly Keyes 200 and Marine 200.

WORK AREA: Gulf of Mexico.

PRIDE NEVADA

DESIGN: Bethlehem MC 200

CONSTRUCTION: Bethlehem Shipyard, Beaumont, Texas, 1981.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 88 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,290 klps.

HELIPORT: 80′ x 75′.

STORAGE: Mud & Cmt Bulk–9,220 cf; Liquid Mud–1,687 bbl; Fuel–2,028 bbl; Water for Driillng–5,962 bbl; Potable Water-1,053 bbl.

DRILLING EQUIPMENT: Drawworks–MidContinent V1220-EB; Pumps–Gardner Denver-P2-11 triplex; Prime movers–EMD 12-648E: Rotary Table–Ollwell 37″””, Top Drive–M-H DDM 500.

DERRICK: Brenham 4E 147′; 1,392,000 lb.

BOP SYSTEM: Shaffer 21″””, 2,000 psi annular; Shaffer 13″””, 5,000 psi annular; CIW 13″””, 10,000 psi double and single.

CRANES: Two Seaking Mariner 100′, 68/40 klps.

REMARKS: Formerly Griffen Alexander 1, Nordlc Explorer and Marine 201.

WORK AREA: U.S. Gulf of Mexico.

PRIDE SOUTH CAROLINA

DESIGN: Bethlehem JU 200 MC – mat cantilever.

CONSTRUCTION: Bethlehem Steel Singapore 1980, Refurbished 2000

PERFORMANCE: Water depth–200′; Drilling depth–20,000′

QUARTERS: 87 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4070 klps Drilling.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt 6,000 cu ft: Liquid Mud–1,500 bbl: Fuel–2,184 bbl; Water for Drilling– 5,992 bbl; Potable Water–1.063 bbl.

DRILLING EQUIPMENT: Drawworks–National 1320-UE; Pumpa–Natlonal 12-P-160: Rotary Table–National 37 1/2″; Top Drive–Varco IDS-1 electric.

DERRICK: PyramId 147′ x 30′ 1,400,000 lb.

BOP SYSTEM: 21 “”” Shaffer spherical 2,000 psi: Cameron 13 “”” 10,000 psi U single and double ram; Shaffer 13 “”” 5,000 psi annular.

CRANES: Two National 05-105; 30-ton, 100′ boom.

REMARKS: Formerly Sedneth Luanda, Baruna V and Marine 202,

WORK AREA: Gulf of Mexico.

PRIDE NORTH DAKOTA

DESIGN: Friede & Goldman Ltd., L-780 Mod II CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–30,000′.

QUARTERS: 72 persons.

HULL 180′ x 175′ x 25′.

VARIABLE LOAD: 4.450 klps.

HELIPORT: 65′ diameter.

STORAGE: Mud & Cmt Bulk–2,024 cf; Liquid Mud–1,874 bbl; Fuel–2,481 bbl; Water for Drilling–5,200 bbl; Potable Water–1,300 bbl.

DRILLING EQUIPMENT: Drammorks–Emsco CIll, 3,000 hp with 7838 brake; Pumpa–Emsco PB-1600; Prime movers–three EMD MD 12E8 w/1,050 KW A.C. gens, and Ross Hill SCR; Rotary Table–Emsco T-3750; Top Drive-Maritime Hydraulics.

DERRICK: Emsco 160′ modified, 1,300,000 lb.

BOP SYSTEM: CIW 13 “”” Type U 10K single 2nd dbl; two Shaffer 13 “”” annular.

CRANES: Two FMC Link Belt 218A, 100′.

REMARKS: Formerly Keyes 300 and Marine 300.

Zero discharge rig.

WORK AREA: Gulf of MexIco.

PRIDE TENNESSEE

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Miss, 1981.

PERFORMANCE: Water depth–300′.

QUARTERS: 50 persons.

DRILLING EQUIPMENT: Drawworke-Emsco CII 2,000 hp w/7838 brakes; Top Drive-Varco TDS 3.

DERRICK: 1,400,000-lb GNC.

REMARKS: Formerly Marine 301.

OTHER DATA Typical of Pride North Dakota.

WORK AREA: Gulf of Mexico.

PRIDE WEST VIRGINIA

CONSTRUCTION: Ingalls Shipbuilding, Pascagoula, Mias, 1982.

PERFORMANCE: Water depth–300′.

QUARTERS: 50 persons.

STORAGE: Mud & Cmt Bulk–7,925 cf.

DRILLING EQUIPMENT: Top Drive: M-H DDM 650C.

DERRICK: 1,700,000 GNC.

BOP SYSTEM: Two NL double 10.000 psi; One NL annular 5,000 psi; One NL 2K spherical.

REMARKS: Formerly Marine 303

OTHER DATA: Typical of Pride North Dakota.

WORK AREA Gulf of Mexico.

PRIDE WISCONSIN

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1976.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 88 persons.

HULL 248′ x 200′ x 26′.

VARIABLE LOAD: 3,843 klps plus 1,250 klps drilling load.

HELIPORT: 70′ dla.

STORAGE: Mud & Cmt Bulk–9,500 cf; Liquid Mud-1,197 bbl; Fuel–3,679 bbl; Water for Driiiing–7,749 bbl; Potable Water–1,724 bbl.

DRILLING EQUIPMENT: Drawworks–Ollwell E3000, two GE-752; Pumps–two Ollwell triplex PT-1700; Prime movers–five Cat. D-399; Top Drive-Varco TDS-3.

DERRICK: Pyramid 160′; 1,000,000-lb.

BOP SYSTEM: 13″”” Shaffer annular; 13″””, 10,000 psi, Cameron.

CRANES: Three LeTourneau PC-120, 100′.

REMARKS: Formerly Key Largo and Marine 304.

WORK AREA: Gulf of Mexico.

PRIDE HAWAII

DESIGN: Levingston 111-C

CONSTRUCTION: Mitsui Shipbuilding, Japan, 1975. Upgraded 1997.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 98 persons.

HULL 207′ x 177′ x 23′.

VARIABLE LOAD: 2,160 t.

HELIPORT: 62′ x 66′, S-61N.

STORAGE: Mud & Cmt Bulk–9,600 cf+8,000 sks; Liquid Mud–1.900 bbl; Fuel–3,660 bbl; Water for Drilling-4,836 bbl; Potable Water–1,862 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE; Pumpa-Nat’l 12-P-160 Triplex; Prime movers–3 GM EMD @ 1,977 hp: Rotary Table-Nat’l 0-37″””; Top Drive–Varco TDS-4.

DERRICK: 160:1,000.000 lb GNC.

BOP SYSTEM: Shelter 21″”” ram, 2.000 psi; 21″”” shear, 2,000 psi; 21″”” annular. 2,000 psi; Hydril 29 1/2″ annular, 5,000 psi; CIW 13″”” U double and single, 10,000 psi.

CRANES: Two Sumitomo, TC-4187J; 20 t @ 39′ w/100′ boom.

REMARKS: Formerly Hakuryu IV. Venturer, Palawan Princess, Port Princess, Odin Princess and Marine 305. Cantilever extends rotary 50′ from stem, 10′ each side of center.

WORK AREA: S.E. Asia.

PRIDE ROTTERDAM

DESIGN: N/A

CONSTRUCTION: IH Gusto, the Netherlands, Conv, to accomdation 1992. Refurbished 2001.

PERFORMANCE Water depth–205′-224′; Drilling depth–N/A’

QUARTERS: 110 persons

HULL 239′ x 225′ x 23′

VARIABLE LOAD: 3,313 mt.

HELIPORT: N/A

STORAGE: Mud & Cmt-N/A; Liquid Mud–N/A; Fuel–3.400 bbl; Water for Drilling–5,000 bbl; Potable Water-1,400 bbl.

DRILLING EQUIPMENT: Drawworks–N/A; Prime movers–one Cat 3516, three Cat D-399, one Cat D-343.

DERRICK: N/A

BOP SYSTEM: N/A

CRANES: One Bucyrus-Erie MK 35, 100′; one Hydralift MCVC 1800-10-21, 21M; one Nat’l os-435, 120′, 48 t.

REMARKS: Formerly Marine 306

WORK AREA: North Sea.

PRIDE OHIO

DESIGN: Offshore Co. Jubilee Class Modified.

CONSTRUCTION: Four triangular leg cantilever added 1980,

PERFORMANCE: Water Depth 250′; Drilling depth–20,000′

QUARTERS: 78 persons.

HULL: 170′ x 130′ x 19′

VARIABLE LOAD: 2,200 mt.

HELIPORT: N/A

STORAGE: N/A

DRILLING EQUIPMENT: Drawworks–Mid-continent U-1220-EB, 2,000 hp; Pumps–Two Nat’l PZ-11 triplex, 1,830 hp; Prime movers–Four Cat. D-399; Top Drive-Varco TDS-4S.

DERRICK: Dreco K200.

BOP SYSTEM: CIW 13″”” 15K sgl. and dbl.

CRANES: Two Hercules HSMC, 50 t end 35 t.

REMARKS: Legs equipped with removable speed cans. Formerly Energy Explorer.

WORK AREA: Bangladesh

Rowan Companies Inc.

ARCH ROWAN

DESIGN: Marathon LeTourneau; 116-C, North Sea type w/bow mounted heliport

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1981.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 78 persons.

HULL 243′ x 200′ x 26′.

VARIABLE LOAD: 2,600 t.

HELIPORT: 73′ dia. Sikorsky S-61.

STORAGE: Mud & Cmt Bulk–S.400 cf each + 1,500 sq ft sk; Liquid Mud–1,400 bbl; Fuel-3,000 bbl; Water for Drilling–11,000 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drammorks-Nat’l 1625 DE, two GE 752 hp; Pumps–three Nat’l 12-P-160; Prime movers–six Cat D-399 turbocharged; Top Drive-Varco.

DERRICK: 160′; 1,250,000-lb load capacity.

BOP SYSTEM: CIW 13″””, 10K; 2K diverter.

CRANES: Four PCM 120,50 t @25′.

POSITIONING: Two, 1,000 hp thrusters.

OTHER DATA: Rigs carry 410′ legs, additional lengths avail, for 35D’ water.

WORK AREA: Gulf of Mexico.

ROWAN CALIFORNIA

CONSTRUCTION: Marathon LeTourneau, Singapore, 1984.

DRILLING EQUIPMENT: Pumps-two Nat’l 12-P-160; Prime movers–five D-399.

OTHER DATA: Typical of Arch Roman.

WORK AREA: Gulf of Mexico.

CECIL PROVINE

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1982

DRILLING EQUIPMENT: Pumps-two Hall 12-P-160; Prime movers–five D-399.

OTHER DATA: Typical of Arch Rowan.

WORK AREA: Gulf of Mexico.

CHARLES ROWAN

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1981.

OTHER DATA: Typical of Arch Roman.

WORK AREA: Gulf of Mexico.

GILBERT ROWE

CONSTRUCTION: Marathon LeTourneau, Vicksburg. Mias, 1981.

OTHER DATA: Typical of Arch Rowan.

WORK AREA: Gulf of Mexico.

ROWAN HALIFAX

CONSTRUCTION: Marathon LeTourneau, Brownaville, 1952.

DRILLING EQUIPMENT: Pumps-two Nat’l 12-P-160; Prime movers-five D-399.

OTHER DATA: Typical of Arch Roman.

WORK AREA: Gulf of Mexico.

ROWAN FT. WORTH

DESIGN: Marathon LeTourneau 118-C, cantilevered Jack-up, aide mounted heliport

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1978.

PERFORMANCE: Water depth–350′: Drilling depth–2500′.

QUARTERS: 78 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,400 t.

HELIPORT: Sikorsky S-61.

STORAGE: Mud & Cmt Bulk–5,400 Cf & 5,400 cf plus 1,500 aq ft sk: Liquid Mud-1,400 bbl: Fuel–3,000 bbl: Water for Drilling–5,000 bbl; Potable Water-740 bbl.

DRILLING EQUIPMENT: Drawworks–Net’l 1625 DE, two GE 752 hp; Pumps-two Hati 12-P-160; Prime movers–five D-399, SCR; Top Drive–Varco.

DERRICK: 160′;1,250,000-lb load capacity.

BOP SYSTEM: CIW 13%” iOKw/2Kdiverter.

CRANES: Four PCM 120, Sot @ 25′.

OTHER DATA: Thrusters-Two, 1,000 hp. Leg lengths-477′.

WORK AREA: Gulf of Mexico,

ROWAN MIDDLETOWN

CONSTRUCTION: Marathon LeTourneau; Vicksburg, Miss, 1980

DRILLING EQUIPMENT: Pumps–Three 12-D-160; Prime movers–Six D-399.

OTHER DATA: Typical of Roman Ft. Worth.

WORK AREA: Gulf of Mexico.

ROWAN PARIS

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss. 1980

REMARKS: Leg lengths-410′; re-engined w/ six Cat. 3518, 1,646 hp ea. Three Natl 12-P-160 mud pumps.

OTHER DATA: Typical of Roman Ft. Worth, except four D399 Prime movers.

WORK AREA: Gulf of Mexico.

ROWAN-ALASKA

DESIGN: Marathon LeTourneau Class. 118-S, slotted Jackup: also Marathon Class 84.

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1975.

PERFORMANCE: Water depth–350′; Drilling depth–25,000′.

QUARTERS: 78 persons.

HULL: 247′ x 200′ x 28′,

VARIABLE LOAD: 2,600 t.

HELIPORT: Slkorskly S-51.

STORAGE: Mud & Cmt Bulk–5,400 cf & 5,400 cf, plus sack stg: Liquid Mud-1,400 bbl; Fuel–3,700 bbl: Water for Driiling–6,600 bbl: Potable Water-1,100 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625 DE, two GE 752 hp: Pumps-two Natl 12-P-160; Prime movers–four Cat. D-399 diesel electric, 5,400 hp; One Cat D.

DERRICK: 160′; 1,250,000-lb load capacity.

SOP SYSTEM: CIW, 10,000 psi.

CRANES: Four PCM 120,50 t @ 25′.

OTHER DATA: Thruster system, two Baylor 1,000 hp. 476′ legs, 50′ wide x 41′ long drill siot. Skid-off capability.

WORK AREA: Gulf of Mexico.

ROWAN ODESSA

CONSTRUCTION: Marathon LeTourneau, 1977.

PERFORMANCE: Water depth–350′.

REMARKS: Top Drive-Varco.

OTHER DATA: Typical of Roman-Alaska, except five D399 Prime movers.

WORK AREA: Gulf of Mexico.

ROWAN JUNEAU

CONSTRUCTION: Marathon LeTourneau, Vicksburg. Miss, 1977. Rennovated 1991.

PERFORMANCE: Water depth-350′: equipped w/410′ legs.

BOP SYSTEM: CIW. 15,000 psi.

OTHER DATA: Typical of Roman-Alaska, except Prime movers – five Cat D-399.

WORK AREA: Gulf of Mexico.

ROWAN-LOUISIANA

CONSTRUCTION: Marathon LeTourneau, 1975.

OTHER DATA: Typical of Rowan-Alaska. Except for Varco Top Drive, and Prime movers – five Cat D-399.

WORK AREA: Gulf of Mexico.

ROWAN GORILLA II

DESIGN: Marathon LeTourneau 150-88-C Gorilla Class, 45′ x 52′ Slotilever w/605′ legs

CONSTRUCTION: Marathon LeTourneau, Singapore, 1984.

PERFORMANCE: Water depth–450′: Drilling depth-25,000′.

QUARTERS: 80 persons.

HULL: 297′ x 292′ x 30.

VARIABLE LOAD: 3,200 t.

HELIPORT: 93′ x 90′ dia.. Boeing 234 Chinook.

STORAGE: Mud & Cmt Bulk-7,925 cf ea. plus 5.400 sq ft ak stg; Liquid Mud-2.475 bbl; Water for Drilling–17,135 bbl; Potable Water–1,455 bbl.

DRILLING EQUIPMENT: Drawmorks–Nat’l 1825 DE: Pumps–three Nat’l 12-P-160; Prime movers-seven Cat. D-399 turbo charged diesels; Rotary Table-Nat’l 0-495; Top Drive-Varco.

DERRICK: Lee C. Moore, 160′: 1,250,000-lb.

BOP SYSTEM: 211/2′, 5,000 psi; CIW 13%” 10.000 psi; 2.000 psi diverter system.

CRANES: Three 50 ton PCM-120 electric, two 60 ton POM 350.

WORK AREA: Gulf of Mexico.

ROWAN GORILLA III

CONSTRUCTION: Marathon LeTourneau, Vicksburg, 1984.

PERFORMANCE: Water depth-350′; Drilling depth–25,O00.

REMARKS: 605 legs replaced with 370′ legs. Rig in prod./drill, mode in Cahasset/Panuke field.

OTHER DATA: Typical of Gorilla II, but modified to add facilities for production handling.

WORK AREA: North Atlantic, Nova Scotia.

ROWAN GORILLA IV

DESIGN: Enhanced Gorilla class

CONSTRUCTION: Marathon LeTourneau, Vicksburg, 1988.

DERRICK: i60′; 2.000,000-lb hook load.

REMARKS: For North Sea, rated to 328′ water w/504′ legs: for Gulf of Mexico, rated to 450′ mater w/605 legs: Drilling depth-30,000.

OTHER DATA: Typical of Gorilla II.

WORK AREA: Gulf of Mexico.

ROWAN GORILLA V

DESIGN: LeToumeau Inc., Enhanced Gorifia class.

CONSTRUCTION: Vicksburg, Mississippi, 1998.

PERFORMANCE: Water depth-400′; Drilling depth–35,000′.

QUARTERS: 120 persons.

HULL: 306′ x 300′ x 36′.

VARIABLE LOAD: 12,500 kips plus combined hood, setback and pipe tension.

HELIPORT 90′ x 94 dia.

STORAGE: Mud & Cmt Bulk-20,000 cf: Liquid Mud-5,800 bbl (Inc’l sand traps): Base Oil-1,680 bbl; Water for Drilling–20,704 bbl; Fuel-7,870 bbl; Potable Water-1,600 bbl.

DRILLING EQUIPMENT: Dramworks-2,000,000 lb. 3 x 3,300 hp motors; Mud Pumps-Four; Prime movers–Four 5,000 hp: Rotary Table-49%”; Top Drive: Skid-off capability.

DERRICK: 170′; 2,500,000 lb.

SOP SYSTEM: 15,000 psi.

CRANES: Four 60t. one 5Ot.

WORK AREA: North Atlantic Nova Scotia.

ROWAN GORILLA VI

DESIGN: LeToumeau Inc., Enhanced Gorilla class.

CONSTRUCTION: Vicksburg, Mississippi: 2000.

OTHER DATA. Typical of Roman Gorilla V.

WORK AREA: Gulf of Mexico

ROWAN GORILLA VII

DESIGN: LeToumeau Inc., Enhanced Gorilla class.

CONSTRUCTION: Vicksburg, Mississippi: 2001.

OTHER DATA: Typical of Rowan Gorilla V.

RUWAN GORILLA VIII

DESIGN: Super Gorilla XL

CONSTRUCTION: Vicksburg, Mississippi, 2003

PERFORMANCE: Water depth– 550′ U.S. Gulf; Drilling depth–25,000′

QUARTERS: 120 persons.

HULL: 306′ x 300′ x 36′

VARIABLE LOAD: N/A

HELIPORT: 83 octagon

STORAGE: N/A

DRILLING EQUIPMENT: Drawworks-LeToumeau 3,000 hp; Pumps–three Lewco 3,000 hp: Prime movers–Six Cat 3516 B; Rotary Table-Nat’l 49%; Top Drive-Nat’l PS2 650/750.

DERRICK: Woolslayer 160′, 2,000,000 lb.

BOP SYSTEM: Vetco Gray KFDJ diverter: two C/W 18%” 15K; one Hydril GX 18% 10K.

CRANES: Three Letourneau 35OSS: two LeTourneu 120 SS.

REMARKS: Legs 713.

WORK AREA: Gulf of Mexico.

Rowan Drill Inc.

ROWAN-TEXAS

DESIGN: Marathon LeTourneau Class 52.

CONSTRUCTION: Marathon LeTourneau, 1972.

PERFORMANCE: Water depth-250′; Drilling depth-20,000′.

QUARTERS: 78 persons.

HULL: 203′ x 188′ x 22′.

VARIABLE LOAD: 1,500 t.

HELIPORT: 60′ dia.; Sikorsky S-61.

STORAGE: Mud & Cmt Bulk-5,000 cf & 1,500 aks: Liquid Mud-1,250 bbl; Fuel-3,100 bbl; Water for Drilling-3,840 bbl: Potable Water–630 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE: Pumps–two Nat’l 10-P-130: Prime movers–six Cat. D-398 TAC, 1,000 hp each; Top Drive–Varco.

DERRICK: L.C. Moore. 147′, 1,1OO kips.

BOP SYSTEM: C/W 10,000 psi.

CRANES: Four PCM-120, 50 t @ 25′.

OTHER DATA: 323′ legs. 50′ wide x 41′ long drill slot; Slotlever conversion coming to Texas.

WORK AREA: Gulf of Mexico.

Rowan International Inc.

RU WAN-ANCHORAGE

CONSTRUCTION: Marathon LeTourneau, 1972.

OTHER DATA: Typical of Roman-Tease.

WORK AREA: Gulf of Mexico.

ROWAN-HOUSTON

CONSTRUCTION: Marathon LeTourneau, 1969.

DRILLING EQUIPMENT: Pumps–two Nat’l 12-P-16O: Prime movers–five Cat. D-398 TAC: Generstors-six 800 kw AC Gensets. 6 DC generators.

OTHER DATA: Typical of Rowan-Texas; converted to cantilever.

WORK AREA: Gulf of Mexico.

ROWAN-NEW ORLEANS

CONSTRUCTION: Marathon LeTourneau, 1971.

REMARKS: Skid-Off capabilities. Dual purpose crane/rig unit.

OTHER DATA: Typical of Roman-Texas. Dual purpose crane/rig unit.

WORK AREA: Gulf of Mexico.

Saipem

PERRO NEGRO 2

DESIGN: Marathon LeTourneau, 116-C

CONSTRUCTION: Marathon LeTourneau, U.K. 1980.

PERFORMANCE: Water depth-300; Drilling depth-21,000′.

QUARTERS: 112 persons.

HULL: 243’1″ x 200’6″.

VARIABLE LOAD: 2.168 mt.

HELIPORT: 72′ 10″ dia.

STORAGE: Mud & Cmt Bulk–9,620 cf: Liquid Mud-1,400 bbl; Water tar Drilling–6,270 bbl; Potable Water-1,484 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–two Oilwell A-1700-PT; Prime movers–five Cat. D-399: Rotary Table-Oilwell 37 1/2″.

DERRICK: Branham 160′; 1,300,000-lb.

BOP SYSTEM: Shaffer 21 1/4″, 2,000-psi and 13 5/8″, 5,000-psi sphericals; Shaffer 20 3/4″, 3.000-psi double ram; Hydril 13 5/8″, 10,000-psi single and double rams.

CRANES: Three LeTourneau PCM 120-AC.

WORK AREA: Iran: Persian Gulf.

PERRO NEGRO 3

DESIGN: Friede & Goldman Ltd. L-780-Mod, II

CONSTRUCTION: Arsenale Triestino, S. Marco., Trieste, Italy, 1983.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 88 persons.

NULL: 180′ x 175′.

VARIABLE LOAD: 1,905 mt.

HELIPORT: 73′ dla.

STORAGE: Mud & Cmt Bulk–6,700 cf; Liquid Mud–1,600 bbl; Fuel–5,600 bbl; Water for Drilling–5,000 bbl; Potable Water-1,100 bbl.

DRILLING EQUIPMENT: Drawworks-Ideco E2100; Pumps-two deco T-1600; Prime Movers–five GMT B 230.6; Rotary Table-Ideco 37 1/2″.

DERRICK: Dreco 147′; 1.350,000-lb API capacity.

BOP SYSTEM: Caarneron-20 3/4″, 3,000-psi and 21 3/4″, 2,000-psi double; 13 5/8″, 10,000-psi single and double rams.

WORK AREA: India.

PERRO NEGRO 4

DESIGN: Marathon LeTourneau, 150-44

CONSTRUCTION: Marathon LeTourneau. Brownsville, Texas, 1977.

PERFORMANCE: Water depth–150′; Drilling depth–16,000′.

QUARTERS: 64 persons w/4-man hospital.

NULL: 148′ x 160′ x 16′.

VARIABLE LOAD: 927 mt.

HELIPORT: 11,200 lb maximum gross weight.

STORAGE: Mud & Cmt Bulk–4,200 cf; Liquid Mud–1,000 bbl; Fuel–1,300 bbl; Water for Drilling–6,100 bbl; Potable Water–750 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 110 UE; Pumps–two Nat’l 9-P-100 1,000 hp; Prime Movers–three GM Detroit Diesels 1,800 hp each; Rotary Table–Nat’l C-375.

BOP SYSTEM: Hydril 13 5/8″, 5,000-psi annular; Shatter 21 1/4″, 2,000-psi annular w/driverter; CIW 13 5/8″, 10,000-psi rams.

CRANES: Two LeTourneau PCM-120 AS 45 ton.

REMARKS: Subbase can be skidded onto a platform.

WORK AREA: Red Sea.

PERRO NEGRO 5

DESIGN: Levingston, 111-C

CONSTRUCTION: Levingston Shipbuilding Co., Orange, Texas, 1980.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL: 200′ x 186′ x 22′,

VARIABLE LOAD: 1,500 st,

HELIPORT: 84′ x 70′.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud–1,190 bbl; Fuel–4,134 bbl; Water for Drilling–5,530 bbl; Potable Water–904 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160; Prime movers–five Cat. D-399 turbocharged; Rotary Table–Nat’l 37 1/2″.

DERRICK: Dreco 160′; 1,000,000-lb.

BOP SYSTEM: Shatter 21 1/4″ and 13 5/8″.

CRANES: One Nat’l 215, one Nat’l 105.

WORK AREA: Nigeria.

Santa Fe International Carp.

RIG 103

DESIGN: Marathon LeTourneau Class 52-C

CONSTRUCTION: Marathon LeToumeau, Singapore, 1974.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 100 persona.

HULL: 203′ x 168′ x 22′.

VARIABLE LOAD: 4,051 kips plus 1,000 kips drilling load.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–1,980 bbl; Fuel–1,500 bbl; Water for Drilllng–4,800 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-2 with 2 GE 752 motors; Pumps–two Nat’l 12P160; Prime movers–four Cat. 0-351 SB; Rotary Table–Emaco T-3750. Top Drive–Nat’l PS 2-500.

DERRICK: Emsco 160′.

BOP SYSTEM: 29 1/2″, 500-psi diverter; 13 5/8″, 10,000-psi rams, 21 1/4′, 2,000 psi.

CRANES: Three LeTourneau; 45 t @ 25′.

REMARKS: Variable loads for jackups are site specific and can vary with local conditions.

WORK AREA: Arabian Gulf.

RIG 105

CONSTRUCTION: Marathon LeTourneau, Singapore, 1975.

QUARTERS: 88 persons.

VARIABLE LOAD: 3,250 kips plus 1,000 kips drilling load.

STORAGE: Mud & cmt bulk 8.800 cf; reserve mud 800 bbl.

DRILLING EQUIPMENT: Pumps–Emaco FB-1300.

DERRICK: Emaco 160′.

OTHER DATA: Typical of Rig 103 except Top Drive – Varco TDS 3.

WORK AREA: Gulf of Suez.

RIG 124

DESIGN: MODEC Model 200 C-45

CONSTRUCTION: Mitsui, Japan, 1980.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′

QUARTERS: 100 persons.

HULL: 203′ x 190′ x 21′.

VARIABLE LOAD: 4,832 kips plus 1,000 kips

drilling load.

HELIPORT: 70′ dia.

STORAGE: Mud & Dint Bulk–7,200 cf; Liquid Mud–1,781 bbl; Water for Drilling–3.379 bbl; Potable Water–1,497 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 US; Pumps–Two Nat’l 10-P-130; Prime movers–Four Cat. D-399; Rotary Table–Nat,l C-375; Top Drive–Nat,l PS2-500.

DERRICK: 160′ EMSCO RD 20; 1,000,000-lb.

BOP SYSTEM: 20″ 2,000 psi w/one annular and one double-ram preventer. 13 5/8″ 10,000 psi w/one annular, one single ram and one double-ram.

CRANES: Two American Aero w/100′ boom, rated at 31 t @ 20′.

WORK AREA: Gulf of Suez.

RIG 127

DESIGN: Friede & Goldman L-780

CONSTRUCTION: China Shipbuilding Corp., Taiwan, 1981.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 100 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,371 kips plus 1,000 kips drilling load.

HELIPORT: 70′ dia.

STORAGE: Mud & Cmt Bulk–8,080 cf; Liquid Mud–2,400 bbl; Water for Drilling–5,486 bbl; Potable Water–1,156 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Emaco FB 1600 triplex; Prime Movers–four Cat. 351 SA; Rotary Table–Nat’l C-375; Top Drive–Varco TDS-4S.

DERRICK: Emsco 160′; 1,000,000-lb hook load capacity.

BOP SYSTEM: 29 1/2, 500 MSP diverter 21 1/4″, 2,000 psi annular and double ram; 13 5/8″, 10,000 psi ram; 13 5/8″, 5,000 psi annular.

CRANES: Two American Aero with 100′ boom, rated at 90,000 lb @ 20′.

WORK AREA: Arabian Gulf, Qatar.

RIG 134

CONSTRUCTION: China Shipbuilding Corp., Taiwan, 1982.

VARIABLE LOAD: 4,304 kips plus 1,250 kips drilling load.

HELIPORT: 60′ polygon, S-61.

DRILLING EQUIPMENT: Pumps–two Emsco FB-1600.

DERRICK: Emsco 160′.

CRANES: Two SeaKing 1700, 110′ booms, 28 t.

OTHER DATA: Typical of Rig 127, except Top Drive – Varco TDS 3.

WORK AREA: SE Asia.

RIG 138

DESIGN: Friede & Goldman L780 Mod II

CONSTRUCTION: China Shipbuilding Corp., Kaohsiung, Taiwan, 1982.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 88 persons.

VARIABLE LOAD: 4,063 kips plus 1,000 kips drilling load.

CRANES: Three 30 t SeaKing, 1700B.

DRILLING EQUIPMENT: Pumps–three CE FB-1600; Top Drive–Varco TDS-3.

OTHER DATA: Typical of Rig 127,

WORK AREA: Mediterranean/Tunisla.

RIG 141

DESIGN: Marathon LeTourneau Class 82-C

CONSTRUCTION: Euro-Asia Dockyard and Construction Wks, Hong Kong, 1982.

PERFORMANCE: Water depth–15′-250′; Drilling depth–25.000′.

QUARTERS: 88 persons.

HULL: 207′ x 176′ x 20′.

VARIABLE LOAD: 4,336 kips plus 1,000 kips drilling load.

HELIPORT: 65′ dia.

STORAGE: Mud & Cmt Bulk–6,880 cf; Liquid Mud–1,718 bbl: Water for Drilling–5,210 bbl; Potable Water–983 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–two Oilwell A-1700 PT; Prime movers–four Cat 399; Rotary Table–Oilwell 37%”; Top Drive–Nat’l PS-2, 500 t.

DERRICK: CE 160′; 1,000,000 lb.

BOP SYSTEM: 21 1/4″, 2,000-psi and 13 5/8″, 5,000-psi annular; 135/8″, 10,000-psi rams.

CRANES: Three MLT RD-120-AS, 50 t.

WORK AREA: Gulf of Suez.

RIG 182

DESIGN: Mod. Friede & Goldman JU 2000 Class.

PERFORMANCE: Drilling depth–30,000′

QUARTERS: 120 persons

HULL: 231′ x 250′ x 31′

VARIABLE LOAD: 10,900 kips drilling.

HELIPORT: 83′ dia.

STORAGE: Mud & Cmt. Bulk– 18,000 cu ft; Liquid Mud–5,211 bbl; Fuel–5061 bbl; Water for Drilling–17.450 bbl; Potable Water–2,l50 bbl

DRILLING EQUIPMENT: Drawworks–Nat’l Oilwell 1625 x 3,000 hp; Pumps–three Nat’l Oilwell 14-P-220, 2,000 hp; Prime movers–Five Cat 3516 B x 9,275 hp; Rotary Table–Nat’l D-495, 49 1/2″; Top Drive–Nat’l PS2 850/750

DERRICK: 170′; 40′ x 40′, 1,600 lb static hook load.

BOP SYSTEM: Stack: 18 3/4″; 10 K annular; two 10 K dbl ram.

CRANES: Two Nat’l 72 DNS C/W, 120′, 50 t; one Nat’l 60 DNS, 120′ 39 t.

WORK AREA: N/A

RIG 183

DESIGN: Mod, Friede & Goldman JU 2000 Class.

OTHER DATA: Same as Rig 183

WORK AREA: N/A

BRITANNIA

DESIGN: Breit & Garcia, Breit No. D-221

CONSTRUCTION: Constructed by Norsmec, 1968.

PERFORMANCE: Water depth–200′ (250′ w/existing leg extensions); Drilling depth–20,000′.

QUARTERS: 104 persons.

HULL: 224′ x 200′ x 25′.

VARIABLE LOAD: 5,200 kips, including drilling load.

HELIPORT: 73′ dia

STORAGE: Mud & Cmt Bulk–7,800 cf; Liquid Mud–2,546 bbl+2,100 bbl oil based; Fuel–1,070 bbl; Water for Drilling–4,130 bbl; Potable Water–670 bbl.

DRILLING EQUIPMENT: Drawworks–Emaco C2 Type 2; Pumps–Three Emaco FB-1600: Prime movers–eight Cat. D-398 TA; Rotary Table–Nat’l C-375; Top Drive–Varco TDS-3H.

DERRICK: Brown Services; 160′; 1.1-million-lb.

BOP SYSTEM: 29 1/2″, 500 pal KFDJ diverter; 13 5/8″, 10,000 psi rams.

CRANES: One MLT PCM 120; One Seatrax 50, 27 t @ 25′; One Mariner Unit 3600A on cantilever.

OTHER DATA: 45′ cantilever.

WORK AREA: North Sea.

COMPACT DRILLER

DESIGN: Marathon LeTourneau 116-C (Hull 216)

CONSTRUCTION: Merathan LeTourneau Marine Co., Vicksburg, Miss, 1991.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′

QUARTERS: 99 persons.

HULL: 243′ x 209′ x 26′.

VARIABLE LOAD: 8,635 kips drilling.

HELIPORT: 73′ dia.

STORAGE: Mud & Cmt Bulk–10,880 cf + 1,300 sq ft stg; Liquid Mud–2,238 bbl; Fuel–2,800 bbl; Water for Drilling–5,000 bbl; Potable Water–1,500 bbl.

DRILLING EQUIPMENT: Drawworks–Nst’l 1625-DE, 3,000 hp; Pumps–two Nat’l 12-P-160; Prime Movers–four Cat. Model-3516, 1,615-hp each; Rotary Table–Nat’l D-495; Top Drive–Nat’l PS2-500.

DERRICK: 1,500,000-lb capacity.

BOP SYSTEM: 49 1/2″, RT diverter, two 13 5/8″, 10K doubles; 13 5/8″, 5 K ann.

CRANES: Three LeTourneau, PCM-120 AS.

REMARKS: Formerly owned by Brobekk A/S and K/S Compact Drilling, unnamed newbuilding.

WORK AREA: SE Asia.

GALAXY I

DESIGN: Friede & Goldman, Universe Class, (L-780 MOD VI)

CONSTRUCTION: Far East Levingston, Singapore, 1991.

PERFORMANCE: Water depth–400′; Drilling depth–30,000′.

QUARTERS: 100 persons.

HULL: 244′ x 250′ x 36′.

VARIABLE LOAD: Up to 14,900 kips, Inc. 2.600 kips drilling load.

HELIPORT: 83′ dia. Accommodates S-61.

STORAGE: Mad & Cmt Bulk–18,200 cf; Liquid Mud–5,000 bbl; Base Oil-1,627 bbl; Brine Storage-1,627 bbl; Potable Water–4,451 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l E – 3000; Pumps–Three 3 x 14 – p – 200: Prime movers–Four Cat. 3606, 10,000 hp; Rotary Table–49 1/2″; Top Drive–Varco TDS4H; Pipe handling-Varco PHM-31.

DERRICK: 170′; 2,000,000 GNC.

BOP SYSTEM: 21 1/4″ 5,000 psi BOP, 13 5/8″ 15,000 psi BOP; Dril-Quip 500 psi fixed diverter.

CRANES: Three Manitex 4,800, 28 t at 65′.

REMARKS: Drill floor and substructure can skid off to platform.

WORK AREA: North Sea.

GALAXY II

DESIGN: Friede & Goldman, Universe Class (L-780 MOD VI)

CONSTRUCTION: Keppel FELS, Singapore, 1998.

VARIABLE LOAD: 14,700 kips.

DRILLING EQUIPMENT: Prime movers–Four, total 10,000 hp; Top Drive–Varco TDS-4S; Pipe Handling-Varco PRS-31, AR3200C.

CRANES: Three SeaTrax 6032.

OTHER DATA: Similar to Galaxy I.

WORK AREA: Canada.

GALAXY III

DESIGN: Keppel FELS, Universe Class, (L-780 MOD VI)

CONSTRUCTION: Keppel FELS, Singapore, 1999.

DRILLING EQUIPMENT: Prime movers–Four total 10,000 hp; Top Drive–Varco TDS-4S; Pipe Handling-Varco PRS-31, AR3200C.

BOP SYSTEM: 18 3/4″, 15,000 psi: Dril-Quip 500 psi fixed diverter.

CRANES: Three SeaTrax 6032.

OTHER DATA: Similar to Galaxy I except DACS split cantilever can be placed onto platform.

WORK AREA: North Sea.

GALVESTON KEY

DESIGN: Marathon LeTourneau slotilever

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1978, fitted with cantilever 1988.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 100 persons.

HULL: 247′ x 200′ x 26′.

VARIABLE LOAD: Approx. 7,475 kips plus 1,250 kips drilling load.

HELIPORT. 70′ dia.

STORAGE: Mud & Cmt Bulk–10,400 cf; Liquid Mud–1,672 bbl incl, pits and reserve; Base oil-1,280 bbl; Fuel–5,000 bbl; Water for Drilling–5,000 bbl; Potable Water–740 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C3 w/two GE-752; Pumps–Emsco FB 1700; Prime movers–four Cat D-3516 B, 4 x Ross Hill SCR; Top Drive–Varco TDS-3.

DERRICK: Emsco 160′.

BOP SYSTEM: Diverter KFD-J 24″ nominal; 29 1/2″ diverter, 21 1/4″ 2,000 psi; 13 5/8″ 10,000 psi.

CRANES: Four LeTourneau PCM 120 w/100′ booms.

TOWING REQUIREMENTS: 8,000-12,000 hp.

WORK AREA Indonesia.

KEY GIBRALTAR

DESIGN: Marathon LeToumeau, Scotland, 1976, upgraded to CL, 1996.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 106 persons.

HULL: 239′ x 200′ x 26′ triangular.

VARIABLE LOAD: 10,000 kips drilling.

HELIPORT: 71′ dia.

STORAGE: Mud & Cmt Bulk–13,240 cf; Liquid Mud–2,487 bbl; Fuel–3,681 bbl; Water for Drilling–7,754 bbl; Potable Water-1,724 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E 2000; two GE-752; Pumps–three Oilwell A 1700 PT; Prime movers-five Cat. D-399, 1,200 hp; one D353 TA Cat. (6,355 total hp); Top Drive–Varco TDS-3H.

DERRICK: Pyramid 160′ x 30′ x 7’11” top base “T” leg derrick; 1,000,000-lb hook load.

BOP SYSTEM: 13 5/8″, 5,000 psi annular; 13 5/8″, 10,000 psi single/double ram.

CRANES: Four LMT PCM 120, one Nautilus 180 BT3.

WORK AREA: Malaysia.

KEY MANHATTAN

DESIGN: Marathon LeToumeau 116-C

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1981.

PERFORMANCE: Water depth–350′; Drilling depth–25,000′.

QUARTERS: 88 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 8,435 kips plus 1,250 kips drilling load.

HELIPORT: 71 dia.

STORAGE: Mud & Crnt Bulk–8,600 cf; Liquid Mud–2,023 bbl; Water for Drilling-10,800 bbl; Potable Water–1,200 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625; Pumps-3 x Nat’l 12-P-160; Prime movers–three EMD 16-645B; Rotary Table-Nat’l 37 1/2″; Top Drive–Varco TDS3.

DERRICK: Pyramid 160′.

BOP SYSTEM: 13 5/8″ Cameron 10,000 psi stack, 29 1/2″ 500 MSP Hydril.

CRANES: Four each PCM 120, SD-ton capacity, 100′ boom.

WORK AREA: Mediterranean.

KEY SINGAPORE

DESIGN: Marathon LeTourneau 116C

CONSTRUCTION: Marathon LeTourneau, Singapore, 1982.

PERFORMANCE: Water depth–350′ (upgraded 1995); Drilling depth–25,000′.

QUARTERS: 100 persons.

VARIABLE LOAD: 6,877 kips drilling; plus 1,250 kips drilling load.

HELIPORT: 65′ dia.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–2,260 bbl; Water for Drilling–10,800 bbl; Potable Water–1,300 bbl.

DRILLING EQUIPMENT: Pumps–Two Nat’l 12-P-160, One Emaco FB 1600; Pipe handling-Varco AR 300 Iron Roughneck.

BOP SYSTEM: 37 1/2″ KFDJ fixed diverter, 21 1/4″, 2K; 13 5/8″, 10 K.

OTHER DATA: Same as Key Manhattan.

WORK AREA: Mediterranean.

KEY BERMUDA

DESIGN: Mitsui, special shallow draft

CONSTRUCTION: Mitsui, Tamano, Japan, 1980.

PERFORMANCE: Water depth–8′-200′; Drilling depth–25,000′.

QUARTERS: 108 persons.

HULL: 246′ x 212′ x 18′.

VARIABLE LOAD: 7,035 kips plus 1,250 kips drilling load.

HELIPORT: 65 dia.

STORAGE: Mud & Cmt Bulk–6,790 cf; Liquid Mud-1,857 bbl; Fuel–4,442 bbl; Water for Drilling–16,608 bbl; Potable Water–1,260 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–2 x A-1700 PT; Prime movers–five CAT D-399; Rotary Table–Oilwell A-37 1/2″; Top Drive-Nat’l PS2-500.

DERRICK: Pyramid 160′; 1,044,000-lb hook load capacity.

BOP SYSTEM: Hydril 29 1/2″, 500 MSP: Cameron 13 5/8″, Four ram 10,000 psi stack; 21 1/4″ double Cameron, 21 1/4″ Hydril, 2,000 MSP ann./divert.

CRANES: One American 200-ton stiff leg construction; two Nat’l 05-105 45-ton deck.

WORK AREA: West Africa.

KEY HAWAII

DESIGN: Mitsui JC-300

CONSTRUCTION: Mitsui. Tamano, Japan, 1979.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 100 persons.

HULL: 221′ x 193′ x 24′.

VARIABLE LOAD: 5,314 kips plus 1,000 kips drilling load.

HELIPORT: 67′ dia.

STORAGE: Mud & Cmt Bulk–8,100 cf; Liquid Mud-1,853 bbl; Fuel–4,346 bbl; Water for Drilling–7,960 bbl; Potable Water-1,500 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625; Pumps-Nat’l 12-P-160; Prime movers-3 x EMD 16-645B; Rotary Table-Nat’l L-37 1/2; Top Drive–Varco TDS-4H.

DERRICK: Pyramid 147′, 1,044,000 lb.

BOP SYSTEM: Hydril 29 1/2″ diverter; 13 5/8″, CIW 10,000-psi stack, 5K ann.; 21 1/4, 2 K Hydril.

CRANES: Three Marathon LeTourneau 50 ton, 100′ booms.

WORK AREA: Persian Gulf.

MONARCH

DESIGN: Friede & Goldman L-780 Mod V Monarch Class

CONSTRUCTION: Far East Levingston Shipyard, Singapore, 1986.

PERFORMANCE: Water depth-350′; Drilling depth–25,000′.

QUARTERS: 100 persons.

HULL: 228′ x 222′ x 30′; over Slo-Rol tanks 253′ x 260′.

VARIABLE LOAD: 7,510 kips plus 1,500 kips drilling load.

HELIPORT. 83′ dia. for Sikorsky S61.

STORAGE: Mud & Cmt Bulk–12,720 cf; Liquid Mud–3,513 bbl; Fuel–2,230 bbl; Water for Drilling-9,877 bbl; Potable Water–2,367 bbl; Base oil-1,140 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C3 type II, 3,000 hp: Pumps–Three Emaco FB1600, each 1,600 hp; Prime movers–Four Wartsila 22V22TA diesel; Rotary Table–Emaco T495; Varco Top Drive–Varco TDS 4S.

DERRICK: 160′; 1,400,000 GB static hook load.

BOP SYSTEM: CIW 21 1/4″, 2,000 psi double U rams: 21 1/4″, 5,000 psi double; Hydril 21 1/4″, 2,000 psi MSP annular; Shaffer 13 5/8″, 10,000 psi, dble. SL ram (2 ea.); 13 5/8″, 5,000 psi GK annular; KFDJ-500 diverter.

CRANES: Three Skagit 363 @ 38 t.

WORK AREA: North Sea.

MONITOR

DESIGN: Friede & Goldman L-780 Mod V Monarch Class

CONSTRUCTION: Far East Levingston Shipyard, 1989.

PERFORMANCE: Water depth–350′; Drilling depth–30,000′.

QUARTERS: 100 persons.

HULL: 228′ x 222′ x 30′.

VARIABLE LOAD: 6,200 kips plus 2,600 kips drilling load.

HELIPORT: 83′ dia., for Sikorsky S61.

STORAGE: Mud & Cmt Bulk–15,045 cf; Liquid Mud–3,580 bbl; Fuel–3,200 bbl; Water for Drilling–10,198 bbl; Potable Water–2,367 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3 type 2; Pumps–Three Emsco FB1600; Prime movers–Four Cat 3606; Rotary Table-Emsco 49 1/2″; Pipe Handling System-Iron Roughneck; Top Drive–Varco TDS-4H.

DERRICK: Dreco 160′; 2,000,000 GNC.

BOP SYSTEM: 13 5/8″, 15,000 psi four ram; 21 1/4″, 5,000 psi BOP; Regan KFDJ integral diverter.

CRANES: Three SeaKing 3500, 32 t @ 65′; One MLT 44t, 100′ on stern portside.

WORK AREA: North Sea.

MAGELLAN

DESIGN: Friede & Goldman L-780 Mod. V, Monarch Class

CONSTRUCTION: FELS, 1992.

PERFORMANCE: Water depth–350′; Drilling depth–30,000′.

QUARTERS: 100 persons.

HULL: 228′ x 222′ x 30′.

VARIABLE LOAD: 8,000 kips + 2,600 kips drilling load.

HELIPORT: 83′ dia, for S61 or Super Puma.

STORAGE: Mud & Cmt Bulk–17,400 cf; Liquid Mud–5,412 bbl; Fuel–3,200 bbl; Water for Drilling–9,900 bbl; Potable Water–2,367 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l E 3.000; Pumps-3 x Nat’l 14 – p – 200; Prime movers-four Cat 3606: Rotary Table–49 1/2″; Pipe Handling System–Varco PHM and Iron Roughneck; Top Drive–Varco TDS-4S.

DERRICK: 2,000,000 lb, 1,600,000 lb static.

BOP SYSTEM: 183/4″, 10,000 psi, three ram; 135/6″, 15,000 psi four ram; 211/4″ 5M three ram, fixed diverter system.

CRANES: Three rated 32 t @ 65 ft.

REMARKS: Skid-off capabilities, subsea drill/comp.

WORK AREA: North Sea.

PARAMESWARA

DESIGN: Baker Marine Corp. BMC 300.

CONSTRUCTION: Promet Pte., Singapore, 1983.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 100 persons.

HULL; 212′ x 210′ x 26.

VARIABLE LOAD: 5,148 kips.

HELIPORT: 70′ x 86′, Sikorsky S-61.

STORAGE: Mud & Cmt Bulk-9,150 cf; Liquid Mud-2,762 bbl; Fuel-5,595 bbl; Water for Drilling-5,430 bbl; Potable Water-1,000 bbl; Brine-1,500 bbl.

DRILLING EQUIPMENT: Drawworks–Ideco 2100; Pumps-three Ideco T-1600; Prime movers-four D-399 Cat; Rotary Table-371/2″ Ideco LR 375 D; Top Drive-Nat’l PS-2, 650/750.

DERRICK: Pyramid 1,300,000 lb.

BOP SYSTEM: 135/8″, 10,000 psi Hydril; 291/2″ Hydril MSP.

CRANES: Three Link Belt 40t at 30′.

REMARKS: Formerly owned by Gerudl Satu SDN BHD; has skid off capacity.

WORK AREA: S.E. Asia.

Saudi Aramco

SAR-2O1

DESIGN: BMC-200-1C

CONSTRUCTION: Promet, Singapore, 1982.

PERFORMANCE: Water depth-230′; Drilling depth-20,000′.

QUARTERS: 88 persons.

HULL: 174′ x 162.5′ x 18′.

VARIABLE LOAD: 3,500 kips.

HELIPORT: 20,000 lb Sikorsky 61.

STORAGE: Mud & Cmt Bulk-8,814 of; Liquid Mud-1,580 bbl; Fuel-2,722 bbl; Water for Drilling-1,230 bbl; Potable Water-230 bbl.

DRILLING EQUIPMENT: Drawworks-Emsco C2, 2,000 hp; Pumps-two Emsco FB1800; Prime movers–four Cat-D399/IPS SCR system; Rotary Table–Nat’l 375; Top Drive–Nat’l 350/500.

DERRICK: 160 ft; 1,300,000 lb.

BOP SYSTEM: CIW 135/8″ 5,000 psi; 30″ annulars,

CRANES: Two BMC 80′ and 100′ booms.

REMARKS: Formerly Sedneth 201 and SAMDP-3

WORK AREA: Saudi Arabia.

Schahin Cury

NORTH STAR 1

DESIGN: Sonat Offshore Drilling

CONSTRUCTION: John Brown, 1965, Hull/equipment refit, 1985.

PERFORMANCE: Water depth-200′; Drilling depth-20,000′.

QUARTERS: 72 persons.

HULL: 170′ x 130′ x 17′.

VARIABLE LOAD: 2,080 short t.

HELIPORT: 80′ x 80′, S-61.

STORAGE: Mud & Cmt Bulk–6,800 cf; Liquid Mud–1,400 bbl; Fuel–3,000 bbl; Water for Drilling-3,000 bbl; Potable Water–650 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 DE; Pumps–Gardner Denver PZ 11C. 1,600 hp; Prime movers–seven Cat. D-398TA; Rotary Table-Nat’l C-375.

DERRICK: Dreco, 147′, 583-t hook load.

BOP SYSTEM: Annular-Hydril MSP 211/4″. 2,000 psi and Hydril GK 135/8″ 10,000 psi; Rams-One double and one single Cameron 135/8″, 10,000 psi; Shaffer LWS. 211/4″, 2,000 psi.

CRANES: Two Unit Mariner 30-ton w/75′ booms.

REMARKS: Formerly owned by Sonat Offshore Drilling Inc.

WORK AREA: Brazil.

Schlumberger Drilling Services

TRIDENT 3

DESIGN: Marathon LeTourneau 116-C

CONSTRUCTION: Marathon LeTourneau, Singapore, 1979.

PERFORMANCE: Water depth-250′; Drilling depth-25,000′.

QUARTERS: 94 persons.

HULL 244′ x 200’6″ x 26′.

VARIABLE LOAD: 2,420 t operating.

STORAGE: Mud & Cmt Bulk-8,000 cf; Liquid Mud–2,201 bbl; Fuel–3,000 bbl; Water for Drilling-11,400 bbl; Potable Water-1,300 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 2100 E, 3,000 hp; Pumps–two GD PZ-11 Triplex 1,600 hp; Prime movers–five Cat. D-399, 1,195 hp each; Rotary Table-371/2″; Top Drive- Varco TDS-4; MDS system.

DERRICK: 147′; 1,392,000-lb GNC.

BOP SYSTEM: 135/8″, 5,000-psi stack w/annular, one single and one double ram.

CRANES: Three LeTourneau PCM-120, 45 t @ 25′.

MOORING: Four 15,000-lb anchors.

WORK AREA: Middle East.

TRIDENT 18

DESIGN: Marathon LeTourneau 116-C cantilever

CONSTRUCTION: Marathon LeTourneau, Singapore, 1980.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 68 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 3,468 kips.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk-8,000 cf & 14,000 cf sks; Liquid Mud-1,400 bbl; Fuel–3,000 bbl; Water for Drilling–5,300 bbl; Potable Water–1,280 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625DE. two 800-hp engines; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–two EMD MD16E8, one EMD MD12E8; Rotary Table–Nat’l C-375, 371/2″; Top Drive-Varco TDS-3HE.

DERRICK: 160′ Pyramid; 1,392,000 lb capacity.

BOP SYSTEM: CIW U 203/4″ 3K dbl; CIW U 135/8″ 10K single/dbl

CRANES: Three LeTourneau PCM-120 AS w/100′ boom, rated 45 ton @ 25′. One Nat’l OS-45 w/100′ boom, rated 20 ton @30′.

MOORING: Four LeTourneau W-1500 TS electric anchor winches each w/2,000′ of 11/2″ wire rope, 10,000-lb anchors.

REMARKS: Formerly W. T. Adams and Sonny Voss.

WORK AREA: Middle East.

TRIDENT 19

DESIGN: Modec 300 C-38.

CONSTRUCTION: Mitsui Ocean Development & Engineering Co., Japan, 1981.

PERFORMANCE: Water depth-300′. Drilling depth-25,000′.

QUARTERS: 82 persons.

HULL 219′ x 190′ x 24.3′

VARIABLE LOAD: Transit and operating 1,772 st.

HELIPORT: 70′ dia., Sikorsky 61-N.

STORAGE: Mud & Cmt Bulk–14,000 cu ft; Liquid Mud–2,174 cu ft; Fuel–2,824 bbl; Water for Drilling–5,367 bbl; Potable Water–2,270 bbl.

DRILLING EQUIPMENT: Drawworks-Oilwell E2000; Pumps–two ollwell A-1700PT; Prime movers–four Cat 3516; Rotary Table-Oilwell A 491/2″; Top Drive–Varco TDS-3.

DERRICK: Dreco 160′, 1,250 kips.

BOP SYSTEM: Hydril 211/4″ 2 K & 135/8 5 K ann; Shaffer 201/4″ 3 K dbl; CIW 135/8″ 10K single/dbl.

CRANES: One Nat’l OS-215 and one Nat’l OS-435.

REMARKS: Formerly Maersk Victory.

WORK AREA: Middle East.

Shanghai Offshore Petroleum Bureau (CNSPC)

KAN TAN ER HAO

DESIGN: Engineering Technology Analysts of America, R-300.

CONSTRUCTION: Robin Shipyard, Singapore, 1976. Upgraded in 1998.

PERFORMANCE: Water depth–300′; Drilling depth–20,000′.

QUARTERS: 106 persons.

HULL: 213′ x 212′ x 27′.

VARIABLE LOAD: 2,215t.

HELIPORT: 75′ dia.

STORAGE: Mud & Cmt. Bulk–1,800 cf each; Liquid Mud-1,800 bbl; Fuel–5,084 bbl; Water for Drilling–4,109 bbl; Potable Water–3,188 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–Two Nat’l 10-P-130; Prime movers– Two Cat. D-399. 850 kW; two Deutzs TBD 620 V12, 1,300 kW & SCR system; Rotary Table–Nat’l C-375; Top Drive–Varco TDS-11S.

DERRICK: 147′ pyramid, 30′ x 30′ base; 1,392,000-lb hook load.

BOP SYSTEM: One 135/8″ NL Shaffer. 10,000 psi double ram; one 135/8″. 10,000 psi single ram; one 135/8 Cameron, 5,000 psi annular; one Hydril MSP. 2,000 psi annular.

CRANES: Two Nat’l H65A, 30 t; one Marathon PCM-80-AS, 12t.

WORK AREA: China Sea.

Smedvig

WEST EPSILON

DESIGN: MSC CJ62 S120

CONSTRUCTION: Far East Levingston Shipyard, Singapore, 1993.

PERFORMANCE: Water depth-375′; Drilling depth-30,000′.

QUARTERS: 100 persons, two-man cabins.

HULL: 256′ x 296′ x 60′.

VARIABLE LOAD: 3,350 mt.

HELIPORT: Sikorsky S-61.

STORAGE: Mud &Cmt-15,600 cf; Liquid Mud–5,300 bbl; Fuel–4,250 bbl; Water for Drilling–14,000 bbl; Potable Water–1,900 bbl.

DRILUNG EQUIPMENT: Emsco C3 Type II, 3,000 hp; Pumps–three Emsco, 2,200 hp; Prime movers–5 x Cat 3616 DITA, 1,085 kW each; Rotary Table–Emsco T-4950-65 hydr. drive; Pipe Handling System–Varco PMH3 w/integrated Iron Roughneck plus Varco PLS-1 pipe-feed; Top Drive–Varco TDS 6

DERRICK: LTV 160′, 2,000,000 lb.

BOP SYSTEM: NL Shaffer 135/8″ x 15,000-psi; 203/4″, 3,000-psi. KFDJ500 diverter.

CRANES: Two Liebherr 50t and one Liebherr 34 t.

WORK AREA: North Sea.

E.G. Thomson (Bulk Carriers) Ltd.

BENNEVIS

CONSTRUCTION: Scotland, Aquired by Odeco 1971. Modernized to cantilever 1985.

PERFORMANCE: Water depth–250′; Drilling depth–20,000.

QUARTERS: 84 persons.

HULL: 286′ x 130′ x 22′.

HELIPORT: 80′ x 80′.

STORAGE: Mud & Cmt Bulk–8,700 cf + 5,000 sks; Liquid Mud–1,600 bbl; Fuel–9,900 bbl; Water for Drilling–3,470 bbl; Potable Water–740 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE 2,200 hp; Pumps–two Nat’l 12-P-160 Triplex. 1,600 hp; Prime movers–four Alco Mod. 12-251 engines; Rotary Table-Nat’l 371/2″, 800 hp; Pipe Handling System–BJ Spintorc; Top Drive–Varco TDS-3.

DERRICK: 140′, 1,000,000-lb hook load.

BOP SYSTEM: One Hydril GK, 135/8″, 5,000 psi; One single, one double, 135/8″. 10,000 psi.

CRANES: Three SeaKing w/100′ booms.

OTHER DATA: Formerly Ocean Tide.

WORK AREA: Gulf of Suez.

TransoceanSedcoForex

D.R. STEWART

DESIGN: Marathon LeTourneau 116-C cantilever

CONSTRUCTION: Marathon LeTourneau, Singapore, 1980.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 86 persons

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 4,955 kips.

HELIPORT: 70′ diameter.

STORAGE: Mud & Cmt Bulk–8,100 cf + 2,500 cf sks; Liquid Mud–1,467 bbl; Fuel–3,120 bbl; Water for Drilling-10,878 bbl; Potable Water–1,280 bbl.

DRILLING EQUIPMENT: Drawworks-Oilwell E-3000, 2,000 hp; Pumps–two Oilwell Al700 PT Triplex; Prime mover–two EMD MD-16EB, one EMD MD12E8; Rotary Table-Nat’l C-495; Top Drive–Varco TDS-4S.

DERRICK: Dreco 160′; 1,330,000 GNC.

BOP SYSTEM: 135/8″, 10,000 psi.

CRANES: Three LeTourneau PCM-120, 45 t @ 25′. One Nat’l OS-45 w/100′ boom, rated 30 ton @ 25′.

MOORING: Four LeTourneau W-1500 TS electric anchor winches each w/2,000′ of 1 1/2″ wire rope, 10,000-lb anchors.

WORK AREA: Mediterranean (Italy).

RANDOLPH YOST

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Brownsville, Texas, 1979.

VARIABLE LOAD: 3,265 kips.

STORAGE: Mud & Cmt Bulk–8,000 cf + 4,000 cf sks; Liquid Mud-1,692 bbl; Water for Drilling–5,300 bbl; Potable Water–1,284 bbl.

DRILLING EQUIPMENT: Prime movers-three EMD 16-645 E8; Rotary Table–Oilwell A375; Top Drive–Varco TDS-3

BOP SYSTEM: 135/a’ 10,000 psi; 211/4″, 2,000 psi.

CRANES: Four LaTourneau PCM-120AS, 50t

MOORING: 7,500 kg anchors.

OTHER DATA: Typical of D.R. Stewart.

WORK AREA: Angola.

RON TAPPMEYER

DESIGN: Marathon LeTourneau 116-C.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1978.

QUARTERS: 84 persona.

VARIABLE LOAD: 4,327 kips.

STORAGE: Mud & Cmt Bulk–8,000 cf + 4,000 of sks; Liquid Mud-1,700 bbl; Fuel – 3,120 bbl; Water for Drilling–10,812 bbl; Potable Water–1,283 bbl.

DRILLING EQUIPMENT: Prime movers–three EMD 16-645 E8; Rotary Table–Oilwell A375; Top Drive–Varco TDS-3.

DERRICK: 147′.

CRANES: Three PCM-120-AS, 45 t, one PCM-80.

OTHER DATA: Typical of D.R. Stewart.

WORK AREA: Indonesia.

F.G. MCCLINTOCK

DESIGN: Marathon LeTourneau 53 SC.

CONSTRUCTION: Marathon LeTourneau, Singapore, 1975. Major upgrade, 1984.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 82 persons.

HULL: 231′ x 200’6″ x 26′.

VARIABLE LOAD: 4,361 kips.

HELIPORT: 71′ dlameter.

STORAGE: Mud & Cmt Bulk–7,280 of & 6,000 cf sks; Liquid Mud–1,411 bbl: Fuel–2,637 bbl; Water for Drilling–10,597 bbl: Potable Water–1,020 bbl.

DRILLING EQUIPMENT: Drawworka–Oilwell E 3000; Pumps–two Oilwell 1700 PT Triplex, 1,700 hp each; Prime movers–five Cat. D-399, 1,200 hp each; Rotary Table–Oilwell B375-37 1/2″; Top Drive–Varco TDS-3.

DERRICK: 162′ Pyramid, 1,400,000-lb capacity.

BOP SYSTEM: 13 5/8″, 10,000 psl; 21 1/4″, 2,000 psl.

CRANES: Three LeTourneau; 50 tons @ 24′; One Unit Mariner 20 t. @ 25′.

REMARKS: Cantilever skid-off capability.

WORK AREA: Mobllizing.

C.E. THORNTON

DESIGN: Marathon LeTourneau 53-SC.

CONSTRUCTION: Marathon LeTourneau, Vicks-burg, Miss, 1974. Major upgrade, 1984.

QUARTERS: 88 peraons.

VARIABLE LOAD: 5,212 kips.

STORAGE: Mud & Cmt Bulk–7,280 of & 3.000 of sks; Liquid Mud-1,411 bbl; Water for Drilling–11,054 bbl.

DERRICK: 147′ Lee C. Moore, 1,000,000 GNC.

CRANES: Three LeTourneau RD120, 45 t; one Unit Mariner 480 H, 22 t.

OTHER DATA: Typical of F.G. McClintock.

WORK AREA: India

GEORGE H. GALLOWAY

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: Astilleros Corrientes S.A.I.C., Argentina, 1984

PERFORMANCE: Water depth depth–300′; Drilling depth-25,000′.

QUARTERS: 88 persons.

HULL: 180′ x 175′ x 25′.

VARIABLE LOAD: 4,142 kipa normal, 5.000 kips temp.

HELIPORT: 70′ diameter, S-61N.

STORAGE: Mud & Cmt Bulk–8,000 of & 4,000 of sks; Liquid Mud–1,923 bbl; Fuel–2,496 bbl; Water for Drilling–5,572 bbl; Potable Water–1.393 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-3000: two 1,000 hp motors; Pumps–two Nat’l 12-P-160; Prime movers–two EMD MD 1668 diesel electric generating seta, one EMD MD-12E8; Rotary Table-Nat’l C-375; Top Drive–Varco TDS-3.

DERRICK: 160′; 1,300,000-lb hook load.

BOP SYSTEM: Same as RBF 205.

CRANES: Three Skagit w/100′ boors, rated 50 tons @30′.

WORK AREA: Gulf of Mexico

ROGER W. MOWELL

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: Far East Levingston Shipyard, Singapore, 1982.

QUARTERS: 88 persons.

VARIABLE LOAD: 3,926 klps normal, 5,426 kips temp.

STORAGE: Mud & Cmt Bulk–6,000 of + 3,400 of sks; Liquid Mud-1,410 bbl; Fuel–2,436 bbl.

DRILLING EQUIPMENT: Pumps–two C. Emsco FB-1600; Rotary Table–Oilwell B 37 1/2″; Top Drive–Varco TDS-4H.

DERRICK: Dreco 160′. 1,392,000 lb. GNC.

BOP SYSTEM: 13 5/8″, 10,000 psl; 21 1/4″, 2,000 psi.

OTHER DATA: Typical of George H. Galloway.

WORK AREA: S. E. Asia.

J.T. ANGEL

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: Astilieros Corrientes S.A.I.C., Argentina, 1982.

VARIABLE LOAD: 4.465 kips.

STORAGE: Fuel–2,436 bbl; Liquid Mud–1,870 bbi.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-GE. two @1,000 hp.

BOP SYSTEM: 13 5/8″, 10,000 psl; 21 1/4″, 2.000 psi.

REMARKS: Formerly W. B. Tyson.

OTHER DATA: Typical of George H. Galloway; except Top Drive–TDS-4H.

WORK AREA: Qatar.

HARVEY H. WARD

DESIGN: Friede & Goldman L-780, Mod II.

CONSTRUCTION: Far East Levingston Shipyard, Singapore, 1981,

VARIABLE LOAD: 3.926 kips normal, 5,426 kips temp.

STORAGE: Mud & Cmt Bulk–8,000 of + 3.400 of sks; Liquid Mud-1,845 bbl; Fuel–2,467 bbl.

DRILLING EQUIPMENT: Pumps–two C. Emaco FB 1600; Rotary Table–Oilwell 37 1/2″; Top Drive–Varco TDS-4H.

DERRICK: 160′, 1.044,000 lb. Static hook load.

BOP SYSTEM: 13 5/8″, 10,000 psi; 20 3/4″, 3,000 psi; 30″ 1,000 psi.

OTHER DATA: Typical of George H. Galloway.

WORK AREA: Malaysia.

INTEROCEAN III

DESIGN: Sonat Offshore Orion Class, cantilevered.

CONSTRUCTION: Mitsui Engineering & Shipbuilding. Japan, 1978,

PERFORMANCE: Water depth–300′ (38-300): Drilling depth–20,000′.

QUARTERS: 88 persons.

HULL: 179′ x 186′ x 27′.

VARIABLE LOAD: 2,000 It.

HELIPORT: 80′ x 80′, S-61.

STORAGE: Mud & Cmt Bulk–8,400 of; Liquid Mud–1,720 bbl; Fuel–4,470 bbl; Water for Drilling–4,740 bbl; Potable Water–1,150 bbi.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE, Elmagco aux. brake; Pumps–Three C. Emsco FB-1600, 1,600 hp; Prime movers-Four Cat. D-399, 1,200-hp diesels w/ 1,050-kW generator; Rotary Table–CE T-3750; Top Drive–Varco TDS-3, 454 mt.

DERRICK: Continental 20RD, 160′ x 30′ x 30′; 1,250 kips static hook load.

BOP SYSTEM: One Cameron U double mm; one single mm, 13 5/8″, 10,000 psi; one Hydril GK annular, 13 5/8″, 5,000 psi.

CRANES: One Link Belt 30B, 80′ boom, 22 ret @ 20′; one Amclyde Mariner, 100′ boom, 27 ret @ 25; one HSMC 50, 100′ boom, 27 ret @27′ one Link Belt, API 108-13, 80′.

OTHER DATA: Formerly Interocean I Transocean Constellation and Transocean III.

WORK AREA: UAE.

SHELF EXPLORER

DESIGN: CFEM T2005-C. cantilevered.

CONSTRUCTION: CFEM Dunkerque, France, 1982.

PERFORMANCE: Water depth–300′ (31-300′); Drilling depth–25,000′.

QUARTERS: 84 persons.

HULL 245′ x 283′ x 25′.

VARIABLE LOAD: 3,002 mt,

HELIPORT: 72′ x 72′, S-61.

STORAGE: Mud & Cmt Bulk–9.600 of; Liquid Mud-1,690 bbl; Fuel–2,300 bbl; Water for Drilling–4,1 50 bbl; Potable Water-1,970 bbi.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625-D.E, 3,000 hp w/ 1 1/2″ drill line; Pumps-Three Nat’l 12-P-160 (1,600 hp); Prime movers-Three Wartsila 2,800 hp diesels driving 2.500 kW generators; Rotary Table-Nat’l C-37S; Top Drive–Varco TDS 4.

DERRICK: 160′; 630 mt GNC.

BOP SYSTEM: One CIW D 13 5/8″ 10K annular; CIW U 13 5/8″ 10K single/dbl; one Shatter 21 1/2″ 2K; CIW 21 1/4″ 2K single/dbl.

CRANES: Two Nat’l OS-215, 120′, 40 at @ 30.

REMARKS: Formerly Shelf Driller. Energy Driller and Transocean Shelf Explorer.

WORK AREA: North Sea.

RBF 100

DESIGN: Bethlehem JU-100 MC

CONSTRUCTION: Bethlehem, Sparrows Point, Maryland, 1983.

PERFORMANCE: Water depth–12′-100′; Drilling depth–20,000′.

QUARTERS: 48 persons.

HULL: 143′ x 100′ x 13,5′.

VARIABLE LOAD: 2,507 t.

HELIPORT: 55′ x 50′, S76

STORAGE: Mud & Cmt Bulk–6,000 of; Liquid Mud–1,300 bbl; Fuel–1,200 bbi; Water for Drilling–4,600 bbl; Potable Water–500 bbl.

DRILLING EQUIPMENT: Drawworks–Gardner Denver 2100E; Pumps–two Gardner Denver PZ-11; Prime movers–four GM-149TI-1,000 kW sets; Rotary Table–Nat’l RT 37 1/2″.

DERRICK: Dreco 147′, 1,056,000-lb hook load capacity.

BOP SYSTEM: CIW 13 5/8″, 10.000 psi.

CRANES: Two Link Belt 138 w/60′ booms, 40t.

REMARKS: Formerly The Mr. Rio. Viking Rig Vl, NR4 and Cliffs Drilling 100.

WORK AREA: Gulf of Mexico.

RBF 110

DESIGN: Bethlehem JU-100MC.

CONSTRUCTION: Bethiehem Steel, Sparrows Point, Maryland, 1982.

PERFORMANCE: Water depth–100′; Drilling depth–25,000′.

QUARTERS: 50 persons.

HULL 143′ x 100′ x 136′.

VARIABLE LOAD: 2,962 kips, operating.

HELIPORT: 55′ x 50′, S-61 or equiv.

STORAGE: Mud & Cmt Bulk–6,000 of; Liquid Mud–1,250 bbl; Fuel–1,187 bbl; Water for Drilling–4,619 bbl; Potable Water–500 bbl.

DRILLING EQUIPMENT: Drareworks–Oliwell E 3006; Pumps–Three Oilwell 1700 PT triplex; Prime movers–Two EMD16 645E8, one EMD12 645E8, each with 1,500 km generators; Rotary Table–Gardner Denver 374″; Top Drive–Varco TDS-3.

DERRICK: DSI 160′, 1.000.000 lb hook load.

BOP SYSTEM: CIW 13 5/8″, 10,000 psi; Shaffer 13 5/8″, 10,000 psi.

CRANES: Two FMC Link-Belt ABS-138A, 80′ boom, 43 tat 40′.

REMARKS: Formerly Broughton I, Viking Rig II, Southwestern 110, Southwestern Marine IV and Cliffs Drilling 110.

WORK AREA: Trinidad.

RBF 150

DESIGN: Marathon LeTourneau, Class 150-44-C, mod. Extensively 1983.

CONSTRUCTION: Marathon LeTourneau, Vicksburg, Miss, 1979.

PERFORMANCE: Water depth–9′-150 Drilling depth–20,000′.

QUARTERS: 50 persons.

HULL: 172′ x 160′ x 16′.

VARIABLE LOAD: 3,093 klps.

HELIPORT: 50′ diameter, S-76.

STORAGE: Mud & Cmt Bulk–6,500 cf; Liquid Mud–1,010 bbl; Fuel-1,289 bbl; Water for Drilling–6,100 bbl; Potable Water–750 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320UE, 2,000 hp; Pumps–three Emsco F-1000; Prime movers–four Cat. D-399 w/Ross Hill SCR; Rotary Table–Emsco T3750: Top Drive-Canrig 1050E, 500t.

DERRICK: Emsco 147′, 1,100,000-lb GNC.

BOP SYSTEM: Three Cameron U type 10,000 psl; NL spherical, 5,000 psl; 21 1/4″ diverter.

CRANES: Two Marathon LeTourneau PCM-120 AS w/100′ boom, 45 ton.

REMARKS: Formerly Keyes 150, Marine 150 Dual Rig 83 and Cliffs Drilling 150.

WORK AREA: Gulf of Mexico.

RBF 154

DESIGN: Marathon LeTourneau, 150-44 C

CONSTRUCTION: Marathon LeTourneau, Brownsvilie, Texas, 1979.

PERFORMANCE: Water depth–150′; Drilling depth–16,000′.

QUARTERS: 40

HULL: 148′ x 160′ x 16′.

VARIABLE LOAD: 3,124 kips

HELIPORT: 50′ dla. polygon.

STORAGE: Mud & Cmt Bulk–6,100 cf; Liquid Mud–1,000 bbl; Fuel–1,300 bbl; Water for Drilling–6,100 bbl; Potable Water–750 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 110UE 2,000 hp; Pumps–three Nat’l 9-P-100, 1,000 hp ea; Prime movers–three GM 16 Cyl. 16E149TI, 1,600 hp each; Rotary Table–Nat’l C-375 37 1/2″.

DERRICK: 142′; 800,000 lb capacity.

BOP SYSTEM: 13 5/8″ 10,000 psi WP ram preventers; 13 5/8″ 5,000 psi WP annular; Shaffer 21 1/4″ 2,000 psi WP annular.

CRANES: Two LeTourneau PCM-120-AS 50 t @ 25′.

REMARKS: Cantilever sub-base. Sub-base can be skidded onto a platform. Formerly Gulfstream, Viking V and Cliffs Drilling 154.

WORK AREA: Gulf of Mexico.

RBF 151

DESIGN: Baker Marine Corn., 150-H

CONSTRUCTION: Baker Marine Corp., Ingleside, Texas, 1981.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 54 persons.

HULL: 174 x 162′ x 18′.

VARIABLE LOAD: 4,313 kips.

HELIPORT: 62′ x 62′.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud–1,315 bbl; Fuel-1,543 bbl; Water for Drilling–3,373 bbl; Potable Water-1,186 bbl.

DRILLING EQUIPMENT: Drawworks–Midco U-1220 EB; Pumps–two GD PZ-10 Triplex; Prime movers–five Cat. D-398 TA; Rotary Table-Oilwell 37 1/2″.

DERRICK: 147′; 1,000,000-lb hook load capacity.

BOP SYSTEM: 135/8″ 10,000 psi; 21 1/4″ diverter.

CRANES: Two Baker Marine Corp. Series 900.

REMARKS: Formerly Charger I, Viking Rig IV and Cliffs Drilling 151.

WORK AREA: Gulf of Mexico.

RBF 156

DESIGN: Baker Marine Corp.; BM-150-H.

CONSTRUCTION: Amardah Shipyard, Durban, South Africa, 1983.

PERFORMANCE: Water depth–150′; Drilling depth–21,000′.

QUARTERS: 80 persons.

HULL: 174′ x 162’6″ x 18′.

VARIABLE LOAD: 4,187 kips.

HELIPORT: 62′ diameter.

STORAGE: Mud & Cmt Bulk–7,200 cf; Liquid Mud–1,656 bbl; Fuel-1,665 bbl; Water for Drilling–3,360 bbl; Potable Water–1,186 bbl.

DRILLING EQUIPMENT: Drawworks–Ideco E-2100; Pumps–Ideco T-1600 hp; Prime movers–three EMD 12645-E8, 1,650 hp each; Rotary Table–Ideco 37 1/2″.

DERRICK: Dreco 147′; 1,000,000 lb.

BOP SYSTEM: Hydril MSP 21 1/4″; NL Shaffer spherical L 13 5/8″, 5,000 psi; Shaffer single and double ram 13 5/8″, 10,000 psi.

CRANES: Two American 7750 w/100′ boom.

REMARKS: Formerly Andrade-Gutierrez V. Atena and Cliffs Drilling 156.

WORK AREA: Gulf of Mexico.

RBF 152

DESIGN: Bethlehem; JU-150 MC

CONSTRUCTION: Bethlehem Steel Corn., Beaumont, Texas, 1980.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 52 persons.

HULL: 157′ x 120′ x 16’6″.

VARIABLE LOAD: 4,000 kips.

HELIPORT: 60′ x 60′; Sikorsky S-61.

STORAGE: Mud & Cmt Bulk-6,120 cf+3,000 ska; Liquid Mud–1,500 bbl; Fuel–1,540 bbl; Water for Drilling–4,218 bbl; Potable Water–548 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps-two Oilwell A-1700 PT; Prime movers–three EMD model MD 12E8; Rotary Table–Oilwell B-37 1/2″; Top Drive–Maritime Hydraulics.

DERRICK: 147′; 1,000,000-lb GNC.

BOP SYSTEM: Shaffer 13 5/8″ 10,000 psi; 21 1/4″ diverter.

CRANES: One Skagit 343; one SeeKing 800

REMARKS: Formerly Comanche, Viking Rig 1 and Cliffs Drilling 152.

WORK AREA: Gulf of Mexico.

RBF 153

DESIGN: Bethlehem JU-150MC

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1980.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 52 persons.

HULL: 157′ x 120′ X 16′.

VARIABLE LOAD: 4,000 kips.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–6,000 cf+3,000 sks; Liquid Mud-1,500 bbl; Fuel-1,550 bbl; Water for Drilling–4,200 bbl; Potable Water–550 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3; Pumps–FB 1600; Prime movers–EMD SR16; Rotary Table–Emsco 49 1/2″.

DERRICK: 147′, 1,400,000 GNC.

BOP SYSTEM: 13 5/8″, 10,000 psi.

REMARKS: Formerly Gulfdrill, Viking Rig VII, Bull Driller and Cliffs Drilling 153.

WORK AREA: Gulf of Mexico.

RBF 155

DESIGN: Levingston Class 011 Cantilever.

CONSTRUCTION: Asmar Shipyard, Talcahuano, Chile, 1980.

PERFORMANCE: Water depth–150′; Drilling depth–20,000′.

QUARTERS: 50 persons.

HULL: 184′ x 178′ x 23′ triangular.

VARIABLE LOAD: 2,936 kips.

HELIPORT: 62′ x 74′.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud-1,245 bbl; Fuel–4,400 bbl; Water for Drilling–5,000 bbl; Potable Water–900 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000 two Oilwell A-1400 PT triplex; Prime movers–three EMD 12E-8 Diesel 1,650 hp; Rotary Table-Oilwell B-37 1/2″.

DERRICK: 147′; 1,392,000 lb gross nominal.

BOP SYSTEM: One Shaffer annular 21 1/4″ 2,000+13 5/8″ 5,000; Cameron double & single U 13 5/8″ 5,000 rams.

CRANES: Two Link Belt ABS 218, 40 t w/90′ booms.

REMARKS: Formerly Ocean Magallanes and Cliffs Drilling 155.

WORK AREA: Gulf of Mexico.

RBF 160

DESIGN: Baker Marine Engineering, BMC 150 IC

CONSTRUCTION: Promet, Singapore, 1980

PERFORMANCE: Water depth–20′-100′: Drilling depth–20,000′.

QUARTERS: 88 persons.

HULL: 151′ x 156′ x 18′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 70′ dia., 2S-67

STORAGE: Mud & Cmt Bulk–6,000 cf; Fuel–2,246 bbl; Liquid Mud-1,544 bbl; Water for Drilling–6,316 bbl; Potable Water–2,126 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 2,000 hp; Pumps–three Gardner Denver PZ-9, 1,000 hp triplex; Prime movers–four Cat. D-399; Rotary Table-Nat’l 37 1/2″. Top Drive–M-H PTD 2X355

DERRICK: Lee C. Moore, 140′, 750,000-lb hook load capacity.

BOP SYSTEM: CIW 13 5/8″ 5,000 psi; 21 1/4″ diverter.

CRANES: One BMC 900,100′, 30 t; one Marathon Letourneau, 100′, 50 t.

MOORING: Four 6,000 KG anchors w/2,500′ of 1/4″ in. wire rope.

REMARKS: Formerly Ocean Master III and Cliffs Drilling 160.

WORK AREA: Arabian Gulf.

RBF 185

DESIGN: Donhaiser Marine

CONSTRUCTION: Vemar Inc., Channelview, Texas, 1982.

PERFORMANCE: Water depth–15′-120′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 185′ x 160′ x 18′.

VARIABLE LOAD: 1,500 t.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–7,500 cf; Liquid Mud–1,323 bbl; Water for Drilling–4,709 bbl; Potable Water–800 bbl.

DRILLING EQUIPMENT: Drawworks–1320 UE; Pumps–two Nat’l 12-P-160; Prime movers–four Cat D-399; Top Drive–Varco TDS-3.

DERRICK: 147′, 1,000,000-lb hook load capacity.

BOP SYSTEM: 13 5/8″. 10,000 psi.

CRANES: Two 25-ton SeaKing, hydraulic.

REMARKS: Formerly Cliffs Drilling La Salle.

WORK AREA: Gulf of Mexico.

RBF 190

DESIGN: BMC

CONSTRUCTION: Baker Marine Corn., Ingleside, Texas, 1978, Upgraded 1963.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 58 persons plus 2-man sick bay.

HULL: 191′ x 132′ x 14′.

VARIABLE LOAD: 3,281 kips.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–6,780 cf+1,000 sks; Liquid Mud-1,415 bbl; Fuel–2,566 bbl; Water for Drilling–4,400 bbl; Potable Water–500 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco, C-2 Type II; Pumps-two CE, FB-1600; Prime movers–four KATO 1,000 kW AC generators driven by four Cat. D-399; Rotary Table–CE Type T-3750.

DERRICK: Emsco 147′; 1,000,000–lb hook load.

BOP SYSTEM: One 13 5/8″, 5,000 psi spherical; One 13 5/8″ 10,000 psi single; One 13 5/8″, 10,000 psi double.

CRANES: One Nat’l 35 t,100′ boom; one SeaKing 75 t, 100′ boom.

REMARKS: Formerly Ocean Conquest and Fairig 82.

WORK AREA: Gulf of Mexico.

RBF 191

DESIGN: BMC 200-MS.

CONSTRUCTION: Baker Marine Corp., Ingleside, Texas, 1978.

PERFORMANCE: Water depth–184′; Drilling depth–20,000′.

QUARTERS: 50 persons.

HULL: 191′ x 132′ x 14′.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 60′ x 60′.

STORAGE: Mud & Cmt Bulk–8,050 cf; Liquid Mud–1,257 bbl; Fuel-1,242 bbl; Water for Drilling–4,390 bbl; Potable Water–489 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 powered by two D-399 Cat, engines; Pumps–two Nat’l 12-P-160 triplex powered by 16-567 engines; Prime movers–two 700-kW gen. powered by 12-567 EMD engines, two 1,000 kw gen. powered by 18 cyl. EMDs Rotary Table–Nat’l C-375.

DERRICK: 147′; 1,400,000-lb hook load capacity.

BOP SYSTEM: One 21 1/4″, 2,000-psi annular; One 13 5/8″, 5,000-psi annular; One U 13 5/8″ single; 13 5/8″, 10,000-psi double.

CRANES: One Link Belt 218; 50 t; one BMC 900.

REMARKS: Formerly J Storm VIII, Marine 8, Production Partner and Cliffs Dilling 150.

WORK AREA: Gulf of Mexico.

RBF 192

DESIGN: Baker Marine Corp., BMC 250 MS

CONSTRUCTION: Baker Marina Corp., 1981.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 52 persons.

HULL: 191′ x 132′.

VARIABLE LOAD: 5,000 kips.

HELIPORT: 60′ x 60′.

STORAGE: Mad & Cmt Bulk–7,500 of; Liquid Mad-1, 143 bbl; Feel–1,222 bbl: Water for Drilling–4,922 bbl; Potable Water-773 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 2100E; Pumps–two Gardner Denver F211; Prime movers–tour EMD 12-645 E8; Rotary Table–Gardner Denver RT 374″.

DERRICK: 147′; 1,300,000 lb hook load.

BOP SYSTEM: Koomey Type 80.

CRANES: Two BMC 900,30 ton.

REMARKS: Formerly Mr. Demp, Loosbrock Sun Songa Sun and Achilles.

WORK AREA: Gull of Mexico.

RBF 200

DESIGN: Bethlehem JU-200MC.

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1979.

PERFORMANCE: Water depth–200′; Drilling depth–20,000′.

QUARTERS: 52 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 80′ x 70′, S-61.

STORAGE: Mud & Cmt Bulk–6,000 cf; Liquid Mud–1,500 bbl; Fuel–2,184 bbl; Water for Drilling–5,952 bbl; Potable Water-1,080 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160 triplex; Prime movers–Four Detroit Diesels 16V149 TI; Rotary Table–Oilwell 37 1/2″; Top Drive–Nat’l PS-500/500.

DERRICK: 160′; 1,392,000 lb.

BOP SYSTEM: 13 1/2′, 10,000 psi; 21 1/2′ diverter.

CRANES: One ABS 218A-Link Belt, 75t; one ABS-108B Link Belt, 43t.

REMARKS: Cantilever cap. to max. 45′. Formerly Sabine I, Phoenix V and Cliffs Drilling 200.

WORK AREA: U.S. Gulf of Mexico.

RBF 201

DESIGN: Bethlehem JU-200MC

CONSTRUCTION: Bethlehem Steel Corp.; Beaumont, Texas, 1981.

PERFORMANCE: Water depth–200′: Drilling depth–25,000′.

QUARTERS: 48 persons.

HULL: 220′ x 185′ x 10′,

VARIABLE LOAD: 4,200 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–7,280 cf; Liquid Mud-1,500 bbl; Water for Drilling–4,200 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Continental Emaco C-2; Pumps-two Continental Emaco FB-1600: Prime movers–EMDSR-16; Rotary Table–Emsco T-4950; Top Drive-Nat’l PS-500.

DERRICK: 160′; 1,000,000 lb hook load capacity.

BOP SYSTEM: Same as RBF 255.

CRANES: Two FMC Unk-belt 218-A.

REMARKS: Formerly Nordrill Oiler and Phoenix I.

WORK AREA: Gulf of Mexico.

RBF 202

DESIGN: Bethlehem JU 200 MC.

REMARKS: Formerly Nordilil Falcon and Phoenix II.

OTHER DATA: Typical of RBF 201, Top Drive–Nat’l PS 500/500.

WORK AREA: Gulf of Mexico.

RBF 203

DESIGN: Bethlehem JU-200 MC.

REMARKS: Formerly Nordrill Steeler and Phoenix Ill.

OTHER DATA: Typical of RBF 201, Top Drive–Varco TDS-3.

WORK AREA: Gulf of Mexico.

RBF 204

DESIGN: Bethlehem JU-200 MC.

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1981.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′.

QUARTERS: 50 persona.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,400,000 lb.

HELIPORT: 60 x 70′.

STORAGE: Mud & Cmt Bulk–6,000 ct; Liquid Mud-1,500 bbl; Fuel–2.184 bbl; Water for Drilling–4,200 bbl; Potable Water-1,050 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l 12-P-160 Triplex; Prime movers–four Detroit Diesels 16V149 TI; Rotary Table-Nat’l. C375; Top Drive–Varco TDS-4.

DERRICK: 160′; 1,000,000 lb.

BOP SYSTEM: Same as REF 205.

CRANES: One ABS-218 A-Link Belt, 75-ton; one ABS-108B Link Belt, 43 ton.

REMARKS: Formerly Sabina III, Songs Sky and Phoenix IV. Cantilever capability to maximum of 45′.

WORK AREA: Gulf of Mexico.

RBF 205

DESIGN: Bethlehem; JU-200 MC

CONSTRUCTION: Bethlehem Steel Corp. 1979.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′

QUARTERS: 60 persons.

HULL: 157′ x 132 x 18′.

VARIABLE LOAD: 4,500,000 lb maximum.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Crst Bulk–3,000 cf+3,000 sks; Liquid Mud-i .500 bbl; Fuel–2,200 bbl; Water for Drilling–4,200 bbl; Potable Water– 1,064 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE; Pumps–two Nat’l lOP-130 Triplex; One CE FE 1600 Triplex; Prime movers–four Cat. 0-399 TA, one Cat. D-346 TA; Rotary Table-Nat’l 374′ independent drive; Top Drive–Varco IDS-1.

DERRICK: Pyramid 147′; 1,320,000-lb.

BOP SYSTEM: Diverter, 21 1/2′ 2,000 psi; One 13%’. 5,000 psi GL Hydril; One 13%’. 10,000 psi type U double CIW; One 13%”, 10,000 psi type U single.

CRANES: One LeTourneau 25-ton, one LeTourneau 45-ton, 100′ booms.

REMARKS: Formerly Sonat DF 85 and Falrig 85.

WORK AREA: Gulf of Mexico.

RBF 206

CONSTRUCTION: Bethlehem Shipyard, Beaumont. Texas, 1980 JU 200 MS.

QUARTERS: 58 persons.

STORAGE: Mud & Dint Bulk–6,800 cf + 3,000 ska storsge; Uquid Mud-1,400 bbl; Fuel–2,200 bbl; Water for Drilling–4,200 bbl; Potable–1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1320 UE; Pumps–two Nat’l 12-P-iSO Triplex; Prime movers–four Cat. D-399 TA, G.E. SCR system; Rotary Table-Nat’l 37’A’, C-375; Top Drive–Varco IDS-1.

DERRICK: Derrick Services Int’l. 147′; 1,392,000-lb hook load capacity.

CRANES: Two Link Belt ABS 238 50-ton, w/100′ booms.

REMARKS: Formerly Sonat DF 86 and Fatrig 86. OTHER DATA: Same as REF 208.

WORK AREA: Gulf of Mexico.

RDF 207

DESIGN: JU-200 MC

CONSTRUCTION: Bethlehem Steel Corp. 1981.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′.

QUARTERS: 59 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,240 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–9,280 cf; Liquid Mud-1,500 bbl; Water for Drilling–5,900 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks-U 1200 EB; Pumps–Gardner Denver PZ-11-1,800 hp; Prime movers–three 12 cyl. EMD 1,650 hp; Rotary Table-GD 37 1/2′.

DERRICK: 147′; 1,392,000 lb.

BOP SYSTEM: Same as REF 205

CRANES: Two Seeking 1400.

REMARKS: Formerly Griffin Alexander II, Aban I and Phoenix VI.

WORK AREA: Gulf of Mexico.

RBF 208

DESIGN: Bethlehem JU-200 MC.

CONSTRUCTION: Bethlehem Steel Corp. 1980.

PERFORMANCE: Water depth–28-160′; Drilling depth–20,000′.

QUARTERS: 74 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,500 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–7,550 cf + 3,000 aks; Liquid Mud-1,500 bbl; Fuel-2,068 bbl; Water for Drilling–5,992 bbl; Potable Water–1,063 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 powered by two 0-399 Cat, engines; Pumps–two Nat’l 12-P-160 triplex powered by 16-587 EMD engines; Prime movers–two 700-kW gen. powered by 12-567 EMD engines; Rotary Table-Nat’l 0-375.

DERRICK: Emaco 147′; 800,000-lb hook load.

BOP SYSTEM: One Shaffer 2l 1/4′, 2,000-psi annular, One Shaffer 13 1/4′. 5,000-psi annular. One Cameron U 13%”, 10,000-psi single; One ‘U’ 13%’, 10,000-psi double; One ‘U’ 13%’, 10,000-psi shear ram.

CRANES: 1 x Link Belt ABS 108-B, 70′. 17.5 t; 1 x Link Belt ABS 138, 90′, 20 t.

REMARKS: Formerly Marine 12 and Cliffs Drilling 201.

OTHER DATA: Cantilever design allows placement of rotary 45′ astern platform.

WORK AREA: Brazil.

RBF 209

DESIGN: Bethlehem JU-200MC

CONSTRUCTION: Bethlehem Steel Corp., Beaumont. Texas, 1979. Refurbished in 1998.

PERFORMANCE: Water depth–200′; Drilling depth–25,000′.

QUARTERS: 75 persons.

HULL: 157′ x 132′ x 18′.

VARIABLE LOAD: 4,000 kips.

HELIPORT: S-61.

STORAGE: Mud & Cml. Bulk–7,550 cf + 3,000 aks; Liquid Mud-1,500 bbl; Water for Drilling–5,992 bbl; Potable Water-1,063 bbl.

DRILLING EQUIPMENT: Drawworks-Nat’l 1625-DE; Prime movers–Four Cat. 3516; Rotary Table-Nat’l C-375; Top Drive-Nat’l PS2-500.

DERRICK: Modified Branham Int’l; 160′, 1.300,000-lb hook load.

BOP SYSTEM: 13 1/4′, 10,000 psi.

CRANES: Two LeTourrieau PC120.

MOORING: Two LeTou!neau 1,500 Series winches, 1,500′ of 1 1/4′ wire rope.

REMARKS: Formerly Cliffs Drilling 14 and Cliffs Drilling 202.

WORK AREA: Brazil.

RBF 250

DESIGN: Bethlehem Steel Corp., 250-MS. Slot 50′ x 50′

CONSTRUCTION: Bethlehem Pvt. Ltd., Singapore, 1974.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 64 persons.

HULL: 166′ x 109′ x 16′.

VARIABLE LOAD: 3,653 kips.

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk-6,150 cf; Cmt-3,450 cf; Liquid Mud-1,500 bbl; Fuel-1,796 bbl; Water for Drilling–4,388 bbl; Potable Water–472 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3 Type II, 3,000 hp; Pumps–two Emaco F-1800 Triplex; Prime movers–two EMD 16-645E1; 2.200 hp, two Cat. D-399TA, 1,115 hp each; Rotary Table–Emaco T-3750~

DERRICK: Emaco 147r; 1,400,000 lb API gross.

BOP SYSTEM: One 21 1/4″ annular; one 13 1/4″ 5 K sgl, one 13 1/4′ 10K dbl; Hydril 13 1/4″ 5K ann.

CRANES: One Link Belt. ABS-108B Seamaster w/60′ boom, 31.25 t (c) 17.5′; one ABS-238, 100′.

REMARKS: Formerly Teledyne 17, Falcon 17 and Falrig 17.

WORK AREA: Gulf of VI exico.

RBP 251

CONSTRUCTION: Bethlehem Steel, 1978, JU 250 MS.

STORAGE: Mud & Cmt Bulk-6,480 cf; Liquid Mud-1,450 bbl; Fuel-1,796 bbl; Water for Drilling-4,324 bbl; Portable–402 bbl.

DRILLING EQUIPMENT: Drawworks–Mid Continent Model U 1220 EB; Pumps–two Gardner Denver PZ-11, 1,600 hp; Prime movers–four EMD SR12E1W, 1,800 hp; Rotary Table–Emaco T-3750; Top Drive–Nat’l PS 500.

CRANES: Two Link Belt, ABS-218 Seamaster w/90′ boom, 49.35 t (c) 28′.

REMARKS: Formerly Teledyne 18, Falcon 18 and Falrig 18.

OTHER DATA: Typical of RBF 250 except PS-SOD top drive.

WORK AREA: Gulf of Mexico.

RBF 252

CONSTRUCTION: Bethlehem Steel Corp., Beaumont, Texas, 1978, JU 250 MS.

STORAGE: Mud & Cmt Bulk–6,480 cf; Liquid Mud-1,540 bbl; Fuel–1.87i bbl; Water for Drilling–4,720 bbl; Potable Water-472 bbl.

CRANES: Two Link belt ABS-216 Seamaster w/90′ boom, 49.4 t (c) 120′.

REMARKS: Formerly Teledyne 19, Falcon 19 and Falrig 19.

OTHER DATA: Typical of REF 250.

WORK AREA: Gulf of Mexico.

RBF 253

CONSTRUCTION: Bethlehem Steel Shipbuilding Corp. 1982, JS 250 MS.

STORAGE: Mud & Cmt Bulk–6,480 of; Liquid Mud-1,665 bbl; Water for Drilling–4.693 bbl; Potable Water–724 bbl.

DRILLING EQUIPMENT: Drawworks–Emsco C-3, Type II, 3,000 hp; Pumps–Emaco Triplex, two FB-1600; Prime movers-3-EMD SR12E1W. 1,620 hp each; ONGM 16V92-GDT, 835 hp; Rotary Table–Emaco T-3759, Nat’l 2-speed gearbox.

CRANES: Two Link Belt AES-218A Seamaster w/90′ boom. 51.45 t (c) 20′.

REMARKS: Formerly Teledyne 20, Falcon 20 and Falrig 20.

OTHER DATA: Typical of REF 250.

WORK AREA: Gulf of Mexico.

RBF 254

DESIGN: Bethlehem JU-250M5.

CONSTRUCTION: Built by Bethlehem Steel Corp. Beaumont. Texas; 1976

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 50 persons.

HULL: 166′ x 109′ x 16′.

VARIABLE LOAD: 3,963 kips

STORAGE: Mud & Cmt Bulk–6,150 of & 3,000 sks; Liquid Mud–1,500 bbl: Fuel-1,796 bbl; Water for Drilling–4,324 bbl: Potable-895 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l. 1625 UE; Pumps–Hati. 12-P-160 (1,600 hp) Triplex; Prime movers–four Cat. D-399; Rotary Table–Nat’l. 375.

DERRICK: 147′; 1-million-lb capacity.

CRANES: Two Nat’l. OS 215, 30-ton w/100′ boom.

REMARKS: Formerly Nordrill Seahawk and Falcon Seahawk.

OTHER DATA: Same as RBF 205.

WORK AREA: Gulf of Mexico.

RBF 255

DESIGN: Bethlehem JU-250M5

CONSTRUCTION: Bethlehem Singapore Pte. Ltd. 1976.

PERFORMANCE: Water depth-250′; Drilling depth–25,000′.

QUARTERS: 60 persons.

HULL: 166′ x 109′ x 16′.

VARIABLE LOAD: 4,200 short t.

HELIPORT: 83′ x 83′.

STORAGE: Mud & Cmt Bulk–7,450 bbl; Liquid Mud–1,500 bbl; Fuel–1,796 bbl; Water for Drilling–4,709 bbl; Potable Water–850 bbl.

DRILUNG EQUIPMENT: Drswworks–Mid Cont. U 1200 w/two EMD D-79 motors; Pumps–Nat’l 12-P-160 Triplex w/two EMD D-79 motors; Prime movers–four Detroit Diesels 16V 149: Rotary Table–Nat’l 37 1/2″.

DERRICK: Pyramid; 147′; 1,392,000 lbs GNC.

BOP SYSTEM: OK 13 5/8″, 5,000 psl; one annular Hydril unit, 21 1/4″, 2,000 psi: 13 5/8″, 5,000 psi; two Cameron ram units, single/double 13 5/8″, 10.000 psi.

CRANES: Two Link Belt ABS 138 w/80′ boom.

REMARKS: Formerly Sonata Offshore Taurus and Falrig Taurus.

WORK AREA: U.S. Gulf of Mexico.

RBF 256

DESIGN: Bethlehem; JU-250 MS

CONSTRUCTION: Dorman Long, Durbin. S. Africa, 1975.

PERFORMANCE: Water depth–250′; Drilling depth–25,000′.

QUARTERS: 64 persons.

HULL: 166′ x 132′ x 16′.

VARIABLE LOAD: 4,400,000 lb maximum

HELIPORT: 60′ x 70′.

STORAGE: Mud & Cmt Bulk–6,396 cf + 3,000 sks storage; Liquid Mud–1,500 bbl; Fuel–1,800 bbl; Water for Drilling–4,484 bbl; Potable Water–894 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320 UE: Pumps–two Nat’l 12P-160 Triplex; Prime movers–four Cat. D-399 TA. G.E. SCR system: Rotary Table–Nat’l 37 1/2″ C-375.

DERRICK: 147′; 1,392,000-lb hook load.

BOP SYSTEM: One 21 1/4″ annular; One 13 5/8″, 6,000 psi Shaffer annular; One 13 5/8″ 10,000 psi type U double CIW; One 13 5/8″, 10,000 single.

CRANES: Two LeTourneau, 45 t.

REMARKS: Formerly Sonat DF 84 and Falrig 84.

WORK AREA: Gulf of Mexico,

TRANSUCEAN COMET

DESIGN: Sonat Offshore Drilling: cantlievered.

CONSTRUCTION: Far East Livingston, Singapore, 1980.

PERFORMANCE: Water depth–250′; Drilling depth–20,000′.

QUARTERS: 82 persons.

HULL: 175′ x 152′ x 21′.

VARIABLE LOAD: 2,200 st.

HELIPORT: 80′ x 80′, S-61.

STORAGE: Mud & Cmt. Bulk–8,200 cf; Liquid Mud–2,140 bbl; Fuel-1,700 bbl; Water for Drilling–6,000 bbl; Potable Water–1,400 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320-UE, Baylor 7838 Eddy brake; Pumps–Two C. Emsco FB-1600; Prime movers–Five Cat. D-399, 1,475 hp, driving Kato 950-kW generators; Rotary Table–Nat’ C-375; Top Drive–Varco TDS 3,500 st.

DERRICK: C. Emsco 147′; 1,400,000 lb.

BOP SYSTEM: Cameron Type U single and double, 13 5/8″. 10,000 psi; one 13 5/8″. 5,000 psi Cameron GK annular.

CRANES: Two HSMC. 100′ booms. 50 st @ 15′.

REMARKS: Formerly Offshore Comet.

WORK AREA: Egypt.

TRANSOCEAN JUPITER

DESIGN: Sonat Offshore Drilling, cantilevered.

CONSTRUCTION: Promet Private Ltd., Singapore. 1981.

PERFORMANCE: Water depth–170′ (13-170′); Drilling depth–16,000.

QUARTERS: 82 persons, plus 3 bed hospital.

HULL: 165′ x 140′ x 18′.

VARIABLE LOAD: 1,815 mt.

HELIPORT: 80′ x 80, S-61.

STORAGE: Mud & Cmt. Bulk–8,200 cf; Liquid Mud–2,226 bbl; Fuel–1,525 bbl; Water for Drilling–6,800 bbl: Potable Water-1,500 bbl.

DRILLING EQUIPMENT: Drawworks–C. Emsco C1 II; Pumps–Two C. Emsco FB-1600 (1,600 hp); Prime movers–Four Cat. D-399 (1,250 hp) driving 1,030-kW generators; Rotary Table–Nat’l C-375; Top Drive–Varco IDS. 1,500 st.

DERRICK: Continental 147′: 1,400,000 lb: 500 mt GNC.

BOP SYSTEM: One Cameron 13 5/8″. 5,000 psi (one single/one double); one Hydril GK 13 5/8″, 5,000 psi annular CIW 10K single/dbl.

CRANES: Two HSMC w/100′ booms, 43,000-lb each.

REMARKS: Formerly Offshore Jupiter.

WORK AREA: Persian Gulf.

TRANSOCEAN MERCURY

DESIGN: Sonat Ofshore Drilling, cantilevered.

CONSTRUCTION: Upper Clyde Shipbuilders, 1969. Refit w/cantilever, 1982.

PERFORMANCE: Water depth–250′ (650-250′); Drilling depth–20,000′.

QUARTERS: 88 persons.

HULL: 276′ x 130′ x 22′.

VARIABLE LOAD: 3,084 mt.

HELIPORT: 70′ x 70′, S-61.

STORAGE: Mud & Cmt. Bulk–9,000 cf; Liquid Mud–1,025 bbl; Fuel–9,800 bbl: Water for Drilling–3,500 bbl; Potable Water–750 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1320UE, Baylor 7838 brake; Pumps–Two C. Emsco FB–1600: Prime movers–Four ALCO (2,500 hp) two Cat. D-399 (1,200 hp), one Cat. D-398 (800 hp); Rotary Table–Nat’l C-375; Top Drive–Varco IDS-1,500 st.

DERRICK: Lee C. Moore. 140′; 1,100,000-st lb cip.

BOP SYSTEM: One 13 5/8″, 5,000-psi Hydril GK annular; two 13 5/8″, 10,000-psi Cameron U single and double.

CRANES: Two Link Belt, ABS 108B; one Sea King, 100′ boom.

REMARKS: Formerly Offshore Mercury.

WORK AREA: Red Sea, Gulf of Suez.

TRANSOCEAN NORDIC

DESIGN: CFEM T-2601-C, cantilevered.

CONSTRUCTION: CFEM, Dunkerque, France, 1984.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 80 persons.

HULL: 266′ x 308′ x 26′.

VARIABLE LOAD: 2,720 mt.

HELIPORT: 72′ x 72. S-61.

STORAGE: Mud & Cmt Bulk–10,460 cf; Liquid Mud–2,360 bbl; Fuel–3,269 bbl; Water for Drilling–5,595 bbl: Potable Water–2,438 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’l 1625DE driven by three Jeumont Schneider 3,000-hp electric motors: Pumps–Three Nat’l 12-P-160 (1,800 hp); Prime movers–Two Cat. D-399 TA diesel engines (1,200 hp); three Cat. 3516 diesel engines (1,600 hp); Rotary Table-Nat’l C-495; Top Drive–Varco TDS-3.

DERRICK Joseph Paris 162′; 1,300,000-lb static hook load.

BOP SYSTEM: Two CIW 13 5/8″, 15,000 psi double rams; one CIW 13 5/8″, 10,000 psi annular.

CRANES: Two Nat’l OS-215, 120′, 22 at @ 30′.

REMARKS: Formerly Glomar Moray Firth 1 and Transocean 9.

WORK AREA North Sea,

TRIDENT 2

DESIGN: Marathon LeTournesa; 116C

CONSTRUCTION: Marathon LeToumeau, Singapore, 1977; modified 1985.

PERFORMANCE: Water depth–300′; Drilling depth-25,00o’.

QUARTERS: 89 persons.

HULL: 237′ x 200′ x 26′.

VARIABLE LOAD: 1,609 st.

HELIPORT: S-61N.

STORAGE: Mud & Cmt Bulk–8,000 cf; Liquid Mud–2,300 bbl: Fuel–2,718 bbl; Water for Drilling–14,918 bbl; Potable Water–1,725 bbl.

DRILLING EQUIPMENT: Drawworks–Gardner Denver 2100-RE. 3,000 hp; Pumps–two GD PZ 11, 1,600 hp Triplex; Prime movers–five Cat. D399, 1,230 hp each; Rotary Table-Nat’l 37 1/2″. Top Drive–Varco TDS 4-S.

DERRICK: 160′; 1,300 kips GNC.

BOP SYSTEM: Shaffer 21 1/4, 2k ann.; Shaffer 13 5/8″. 5k ann.; 13 5/8″, CIW, 10W, single & dbl.

CRANES: Three Marathon LeTourneau PCM-120AS; 45 t @ 25.

WORK AREA: India.

TRIDENT 4

DESIGN: Le Tournese 116-c.

CONSTRUCTION: Marathon Le Tourneau, Brownsville, Texas, 1980; refurbished 1999.

PERFORMANCE: Water depth 300′; Drilling depth 25,000′.

QUARTERS: 116 persons.

HULL: 243′ x 200′ x 26′.

VARIABLE LOAD: 2,960 t.

HELIPORT: S-61.

STORAGE: Mud & Cmt Bulk–9,600 cf; Liquid Mud–2,387 bbl; Fuel–3,070 bbl; Water for Drilling–11,416 bbl: Potable water–1,294 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 2100–E; Pumps–two Gardner Denver PZ-11, 1,600 hp: Prime movers–five Cat d-399, 1,215 hp; Rotary Table-Nat’l 37 1/2″; Top Drive–Varco TDS–3.

DERRICK: 160′, 1,300 kips cap.

BOP SYSTEM: Hydril 21 1/4″, 2 K ann.; Hydril 13 5/8″, 5k ann,; two CIW U dbl., 10k.

CRANES: Two Le Toumeau PCM–120,45 t @ 24; One Nat’l 05435, 53 t @ 30′.

WORK AREA: West Africa.

TRIDENT 6

DESIGN: MODEC: 300C-35

CONSTRUCTION: Mitsui, Japan, 1981.

PERFORMANCE: Water depth–220′; Drilling depth-21,000′.

QUARTERS: 100 persons.

HULL: 219′ x 200′ x 24′.

VARIABLE LOAD: 2,601 st.

HELIPORT: 70′ dia, S-61.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud-2,400 bbl; Fuel–3,158 bbl; Water for Drilling–5,211 bbl; Potable Water–4,231 bbl.

DRILLING EQUIPMENT: Drawworks–GD 1500E, 2,000 hp; Pumps–two GD PZ11, 1,600 hp; Prime movers–four Cat D-399, 1,215 hp each; Rotary Table-37 1/2″; Top Drive–Varco TDS-3H.

DERRICK: 160′; 600 mt GNC.

BOP SYSTEM: Hydrill GK 13 5/8′, 5 K and MSP 21 1/4″, 2K annulars; CIW U, 13 5/8″ sgl/ dble 10K; CIW U double 20 3/4, 3K.

CRANES: Three Mitsui, 45 t @ 24′.

WORK AREA: West Africa.

TRIDENT 8

DESIGN: MODEC 300-C-35.

CONSTRUCTION: Mitsui, Japan, 1981.

PERFORMANCE: Water depth–300′; Drilling depth-21,000′.

HULL: 230′ x 210′ x 24’3″.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud-2,400 bbl; Fuel–3,500 bbl; Water for Drilling-14,300 bbl; Potable Water–7,100 bbl.

OTHER DATA: Same as Trident 6. Top Drive–TDS-4S; Derrick–160′.

WORK AREA: West Africa.

TRIDENT 9

DESIGN: MODEC; 400C-35

CONSTRUCTION: Mitsui Toyo Works, Japan, 1982.

PERFORMANCE: Water depth-400′; Drilling depth-21,000′.

QUARTERS: 104 persons.

HULL: 250 x 246′ x 28.

VARIABLE LOAD: 2,721 mt.

HELIPORT: S-61.

STORAGE: Mud & Cmt Bulk–9.000 cf; Liquid Mud–2,400 bbl; Fuel–4,240 bbl; Water for Drilling–9,800 bbl; Potable Water–4,000 bbl.

DRILLING EQUIPMENT: Drawworks–Gardner Denver 1500 E; Pumps–three GD PZ 11; Prime movers–four CAT 3516, 1,650 hp each: MDS a system. Rotary table-Nat’l C-375; Top Drive–Varco TDS-4S.

DERRICK: Emsco RD-20 160′; 1,392 kips GNC.

BOP SYSTEM: Hydril GK 13 5/8″, 5k and GK 21 1/4″ 2k anns.; CIW U, 13 5/8″, 10K single & dbl; two 20 2/4″ CIW U single.

CRANES: Three Fukushims 30C-45-13-4, 45 t.

MOORING: 4 x 15,000-lb anchors.

WORK AREA: S. E Asia.

TRIDENT 12

DESIGN: Baker Marine Corp., 300 IC, harsh environment

CONSTRUCTION: Nippon Koksn K.K., Tsu Shipyard, Japan, 1982.

PERFORMANCE: Water depth-300; Drilling depth-21,000′.

QUARTERS: 88 persons.

HULL: 212′ x 210′ x 26′.

VARIABLE LOAD: 2,721 t. operating.

STORAGE: Mud & Cmt Bulk–7,500 of; Liquid Mud–2,200 bbl; Fuel-4,890 bbl; Water for Drilling–5,270 bbl; Potable Water-1,490 bbl.

DRILLING EQUIPMENT: Drawworks–Oilweil E-2000: Pumps–two Oliwell PT-1700; Prime movers–five Cat. D-399; Rotary Table-Oilwell 37 1/2″ independent; Top Drive–Varco TDS-3H.

DERRICK: Emaco RD-20 160′; 675 mt GNC.

BOP SYSTEM: One CIW U, 13 5/8″ 15K single/dbl; one Shaffer 2l 1/4″ 10K dbl.

CRANES: One Baker Marine Corp. 900, 21 t’ @ 35′; three FMC 218A, 34 t @ 35′.

REMARKS: Formerly J.F.P. Three.

WORK AREA: India.

TRIDENT 14

DESIGN: Baker Marine BMC 300, cantilever

CONSTRUCTION: Promet Pvt. Ltd., Singapore, 1982.

PERFORMANCE: Water depth-300′; Drilling depth-25,000′.

QUARTERS: 97 persona.

HULL: 212’6″ x210′ x 26′

VARIABLE LOAD: 4,950 kips at.

HELIPORT: S–61.

STORAGE: Mud & Cmt Bulk–9,000 cf; Liquid Mud–2,036 bbl; Fuel-5,596 bbl: Water for Drilling-5,430 bbl; Potable Water-1,000 bbl.

DRILLING EQUIPMENT: Drawworks-Gardner Denver 2100 E; Pumps-three Gardner Denver PZ 11; Prima movers–five Cat. D-399 TA W with KATO 600 V 1500 KVA AC generators; Rotary Table–Gardner Denver 37 1/2″ Top Drive–Varco TDS–4H.

DERRICK: 160′. 1,044,00 lb GNC.

BOP SYSTEM: One 29 1/2″ 500 psl diverter: One 21 1/4″ 2,000 psi stack w/ 1 bag & 2 rams; One 13 5/4″ 5,000 psl stack w/ 1 bag & 3 rams.

CRANES: Three Baker Marine Corp.. 900, 100′ booms, 25 t.

REMARKS: Formerly Andros.

WORK AREA: West Africa.

TRIDENT 15

DESIGN: Modec 300 C-38

CONSTRUCTION: Mitsui Ocean Development & Engineering Co.. Japan. 1982.

PERFORMANCE: Water depth–300′; Drilling depth–25,000′.

QUARTERS: 98 persons.

HULL: 219’10 x 190’3″ x 25’7″.

VARIABLE LOAD: 2,250 mt.

HELIPORT: 70′ dia., S-61.

STORAGE: Mud & Cmt Bulk–9,000 of: Liquid Mud-2,225 bbl: Water for Drilling–4,294 bbl; Potable Water–2.270 bbl.

DRILLING EQUIPMENT: Drawworks–Oilwell E-2000; Pumps–two Oilwell A-1700 PT; Prime movers–four Cat D-399 TA diesel; Rotary Table–Oilwell 49 1/2″; Pipe Handling System–Iron Roughneck; Top Drive–Varco TDS-3.

DERRICK: Dreco, 160′, 1,000,000-lb hook load.

BOP SYSTEM: 21 1/4″%” stack–Hydril 2k spher.; CIW 2k dbl.; 13 5/8″ stack–Shaffer 5k spher.; 2 x Shaffar 10k sgl / dbl. rams.

CRANES: One Nat”l 05 215; one NatI OS 435 HD.

REMARKS: Legs strengthened for moves w/full leg length. Formerly Maersk Venturer.

WORK AREA: South East Asia.

TRIDENT 16

DESIGN: MODEC 300 C–38.

CONSTRUCTION: Mitsui Ocean Development & Engineering Co., Japan, 1982.

REMARKS: Formerly Maersk Voyage; BOP CIW 10k.

OTHER DATA: Typical of Trident 15.

WORK AREA: South East Asia.

TRIDENT 17

DESIGN: MODEC 300 C–38.

CONSTRUCTION: Kenari Shipbuilding., Japan, 1983.

REMARKS: Formerly Maersk Vanguard.

OTHER DATA: Typical of Trident 15.

WORK AREA: South East Asia.

TRIDENT 20

DESIGN: CS MODV.

CONSTRUCTION: Caspian Shipyard Co. (Keppal FELS), Baker, Azerbaijan, 2000.

PERFORMANCE: Typical Caspian Sea; Drilling depth-N/A.

QUARTERS: 100 persons.

HULL 228′ x 222′ x 30′.

VARIABLE LOAD: 3,500 mt.

HELIPORT. MI-B or S-61N.

STORAGE: Mud & Cmt Bulk–11 300 cu ft; Liquid Mud–4.000 bbl; Fuel–3,134 bbl; Water for Driliing–15,000 bbl; Potable Water–2.359 bbl.

DRILLING EQUIPMENT: Drawworks–Nat’I 1125

UBDE; Pumps–3 x Nati 14-P220: Prime movers–4 x Wartaila 12V200; Rotary Table-Nat’l 0375; Top Drive–Canrig AC 1275E.

DERRICK: Loadmaster, 1,300 kips.

BOP SYSTEM: Shaffer 18 3/4″, 10K annular; Shatter 18 3/4″, 15K NXT, 18 3/4″ l5K double rams.

CRANES: Three Brissonneau pedestal 50t @ 30′.

WORK AREA: West Africa.

Well Services Petroleum Co.

WELL SERVICES RIG 50

DESIGN: MODU

CONSTRUCTION: McDermott Shipyard, 1973.

Refurbished 2001 to operate in workover mode.

PERFORMANCE: Water depth–10′-80′.

QUARTERS: 48 persons.

HULL’ 114′ 85′ X 10′.

VARIABLE LOAD: 3,550 kips.

HELIPORT: 34′ dia.

STORAGE: Mud & Cmt. Bulk–3,000 sks; Liquid Mud–390 bbl; Fuel–178.5 bbl; Water for Drilling–393 bbl; Potable Water–393 bbl.

WORK AREA: Point Fortin, Trinidad.

DRILLING EQUIPMENT: Drswworks–Ideco H-35-0; Pamps–Two Gardner Denver PA8K; Prime movers–Two Cat. 3406; Rotary Table-Ideco 17 1/2″.

BOP SYSTEM: Two Cameron U type, 11″, 5,000 psi; one Hydril 11″.

CRANES: One Unk Belt 78.

REMARKS: Formerly Well Services (Marine) Ltd. Marine 2, Cliffs Drilling 101 and RBF 101.

COPYRIGHT 2001 Gulf Publishing Co.

COPYRIGHT 2001 Gale Group