LaNi5-xMx alloys for Ni/metal hydride electrochemical cells

LaNi5-xMx alloys for Ni/metal hydride electrochemical cells

Bugga, Ratnakumar

Studies of physical and chemical effects in the hydride-forming electrodes of rechargeable nickel/metal hydride electrochemical cells have yielded results that now guide efforts to formulate improved electrode alloys to extend the cycle lives of the cells. These efforts involve finding appropriate ternary solutes and amounts of those solutes to alloy with the original hydride-forming binary alloy LaNi^sub 5^ to form alloys of general composition LaNi^sub 5-x^M^sub x^ Here, M denotes any suitable element or alloy that forms a strong bond with lanthanum, as explained below.

Findings consistent with this approach were reported in two previous articles in NASA Tech Brief: “LaNi^sub 5-x^Sn^sub x^Electrodes for Ni/MH Electrochemical Cells” (NPO19805), Vol. 22, No. 8 (August 1998), page 60 and “LaNi^sub 5-x^Ge^sub x^, Electrodes for Ni/MH Electrochemical Cells” (NPO-19962), Vol. 22, No. 8 (August 1990), page 61. At the time of reporting the information for those articles, there was no explanation of the basic physical and chemical mechanisms for the degradation of cycle lives of LiNiS electrodes and for the improvements afforded by partial substitution of Sn or Ge for Ni. The basic mechanisms are still not well understood, but the following understanding has emerged from the research performed thus far:

Hydrides of LaNi^sub 5^ are thermodynamically unstable against disproportionation reactions in which they decompose into Ni plus LaH^sub 2^ or La(OH)^sub 3^. In addition, upon absorption of hydrogen, LaNi^sub 5^ can expand by as much as 24 volume percent; the combination of large expansion during absorption and the corresponding large contraction during subsequent desorption of hydrogen induces structural defects and reductions in particle sizes, with a consequent increase in the diffusion of metal atoms in the LaNi^sub 5^ crystalline lattice. This increase in diffusion increases the La content at the surface, where the La is readily oxidized to form a thick hydroxide layer in one of the disproportionation reactions. The present approach involving formulation of LaNi^sub 5-x^M^sub x^ is based on suppressing diffusion of La and thereby preventing disproportionation of LaNi^sub 5^.

More specifically, the approach is to seek compositions and crystalline structures to immobilize lanthanum atoms in the Haucke-phase metal hydrides. The most promising ternary solutes for this purpose should be elements that form the strongest chemical bonds with lanthanum- stronger than the bonds between nickel and lanthanum. The solute atoms would be positioned on the nickel planes of the Haucke phase, so that they would be close to lanthanum neighbors. Strong bonds to neighboring atoms would suppress the formation of crystallinelattice defects as well as movements of lanthanum atoms.

Preliminary support for this approach has been found through an analysis of cyclic lifetimes for various solutes as reported in the literature; the analysis reveals a close relationship between cyclic lifetime and the heat of formation of the solute with lanthanum (see figure). The finding of this relationship motivated the hypothesis that the rates disproportionation and/or degradation could be reduced by adding solutes that bond strongly with lanthanum. Among the solutes that exhibit high heats of formation with lanthanum are germanium and tin (mentioned in the cited prior articles), plus indium.

This work was done by Ratnakumar Bugga, Robert Bowman, Adrian Hightower Charles Witham, and Brent Fultz of Caltech for NASA’s Jet Propulsion Laboratory. For further information, access the Technical Support Package (TSP) free on-line at under the Electronic Components and Systems category.

In accordance with Public Law 96517, the contractor has elected to retain title to this invention. Inquiries concerning rights for its commercial use should be addressed to

Technology Reporting Office


Mail Stop 122-116

4800 Oak Grove Drive

Pasadena, CA 91109

(818) 354-2240

Refer to NPO-20107, volume and number of this NASA Tech Briefs issue, and the page number

Copyright Associated Business Publications May 1999

Provided by ProQuest Information and Learning Company. All rights Reserved